8ECH0003.1B41C-0

General information

Cable cross section	4x 1.5 mm² + 2x 0.75 mm² + 2x 24 AWG
Durability	Oil resistance per EN 50363-10-2
Listed	E356538 cURus AWM STYLE 21209 90°C 1000 V - AWM I/II A/B 90°C 1000 V FT1 YY/WW
Certification
CE	Yes

Cable construction

Power lines
Quantity	4
Wire insulation	PP
Wire colors	Black U/L1/C/L+, black V/L2, black W/L3/D/L, yellow/green
Design	Copper stranded wire
Diameter	1.5 mm²
Shield	No
Stranding	No
Supply lines
Quantity	2
Wire insulation	PP
Wire colors	White, black
Design	Tinned copper stranded wire
Diameter	0.75 mm²
Shield	Tinned copper braiding, optical coverage >90% and foil shield
Stranding	Sheathing with fleece tape, overlap ≥25%
Signal lines
Quantity	2
Wire insulation	PP
Wire colors	Blue, white
Design	2x copper stranded wire
Diameter	2x 24 AWG
Shield	Tinned copper braiding, optical coverage >85% and foil shield
Stranding	Two insulated wires are twisted into a pair.
Cable stranding	With filler elements and foil shield
Complete shielding	Tinned copper braiding, optical coverage >85% and foil shield
Outer sheathing
Material	PUR
Color	Orange, similar to RAL 2003 flat
Labeling	B&R (4G1.5+1x (2x0.75) + ((2xAWG24))) E356538 cURus AWM STYLE 21209 90°C 1000 V - AWM I/II A/B 90°C 1000 V FT1 YY/WW

Connector

Type	8-pin female speedtec hybrid motor connector
Connection cycles	<500
Contacts	8
Additional connectors	8-pin male Mini I/O encoder connector Mating cycles: <1500 Contacts: 8 Degree of protection per EN 60529: IP30 when connected
EN 60529 protection	IP66/67 when connected

Electrical characteristics

Test voltage
Wire/Wire	4 kV
Wire/Shield	4 kV
Conductor resistance
Power lines	≤13.3 Ω/km
Supply lines	≤26 Ω/km
Signal lines	≤84 Ω/km
Insulation resistance	≥500 MΩ*km
Max. current load in accordance with IEC 60364-5-523 by installation type
Wall mounting	20.2 A
Installed in conduit or cable duct	17.8 A
Installed in cable tray	20.9 A

Environmental conditions

Temperature
Moving	-40°C to +90°C
Static	-50°C to +90°C

Mechanical characteristics

Dimensions
Length	3 m
Diameter	13.20 mm ±0.3 mm
Flex radius
Single bend	>40.5 mm
Moving	≥101.25 mm
Drag chain data
Acceleration	Max. 50 m/s² (depends on the length of the travel path)
Flex cycles	≤3,000,000
Speed	Max. 300 m/min
Weight	0.72 kg

Número do material:

8ECH0003.1B41C-0

Descrição:

ACOPOS P3 hybrid motor cable EnDat 3, length 3 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 24 AWG, Speedtec 8-pin female motor connector size 1, Mini I/O 8-pin male connector, can be used in cable drag chains

Documentação	Version (Data)	Download
Datenblatt 8ECH0003.1B41C-0		PDF / 232 KB Login for download