General information
| B&R ID code | 0xA7A9 |
| Status LED | Sì |
| Electrical isolation | |
| Mains input - Power output | Sì |
| Mains input - 24 VDC | Sì |
| Power output - 24 VDC | No |
| X2X Link - Mains input | Sì |
| X2X Link - Power output | Sì |
| X2X Link - 24 VDC | Sì |
| Connection type | Lunghezza massima del cavo diretto al modulo di alimentazione: 25 m |
| Certifications | |
| CE | Yes |
| UL |
cULus E225616 Power conversion equipment |
| EAC | Yes |
| KC | Yes |
Mains input
| Input voltage range | 3x 380 - 480 V c.a. ± 10% |
| Input current at full load |
3x 2.2 A a 400 V c.a. 3x 1.8 A a 480 V c.a. |
| Frequency range of mains voltage | 50 - 60 Hz ± 5% |
| Phase failure detector | Sì |
| Power failure bypass | 10 ms (a pieno carico) |
| Power factor (cos φ) |
0.72 a 400 V e 1 kW 0.69 a 480 V e 1 kW |
| Leakage current to PE | < 3.5 mA |
| Protective circuit | Protezione mediante varistori contro le sovratensioni momentanee |
| Fuse protection | |
| Internal | Fusibile interno su ciascuna fase (5 A) |
| External | È richiesto un fusibile esterno per la protezione della linea |
Power output
24 VDC voltage output
| Voltage range | 24 V c.c. ± 10% |
| Output current | Corrente max. continua 2 A |
| Output protection | Protezione contro cortocircuito, sovraccarico e circuito aperto |
| Parallel connection | No |
Chopper output
| Response threshold for chopper activation | 29 - 95 V c.c. (regolabile) |
| Overtemperature protection (chopper-internal) | Sì |
| Output current / Output power | |
| Continuous current / Continuous power | 30 A |
| Maximum current / Maximum power | 40 A |
Interfaces
| User interface | |
| Variant | Connettore a 10 pin |
| Type | X2X |
| Min. X2X Link cycle time | 250 µs |
Efficiency, reliability
| Efficiency | > 92% |
| Power dissipation | |
| Rated load | 90 W |
| No-load operation | 30 W |
Operating conditions
| Mounting orientation | |
| Vertical | Sì |
| Ventilation/Cooling | Ventola con controllo interno |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | 0 - 50 °C |
| Storage | -25 - 85 °C |
| Transport | -25 - 85 °C |
| Relative humidity | |
| Operation | 5 - 95%, senza formazione di condensa |
| Storage | 5 - 95%, senza formazione di condensa |
| Transport | 5 - 95%, senza formazione di condensa |
Mechanical properties
| Material | Robusto involucro metallico |
| Dimensions | |
| Width | 67.5 mm |
| Height | 257 mm |
| Depth | 219 mm |
| Weight | 3.75 kg |
Numero materiale:
80PS080X3.10-01Descrizione:
- Input: 3x 380 to 480 VAC ±10%
- Output voltage adjustable via X2X Link
- Status information readable via X2X Link
- Chopper output for connecting an external braking resistor
- 3-phase wide range input
- Closed metal housing
Accessori obbligatori
Serie di connettori
| 80XPS080X3.10-01A | Screw clamp terminal block set for 80PS080X3.10-01: 1x 0TB3104-7021, 1x 0TB3104-7022, 1x 0TB3102-7010, 1x 0TB1110.8010, 1x 0TB103.3 |
accessori opzionali
Resistenza di frenatura
| 80XBR0025.010-11 | Braking resistor for power supply module 80PS080X3.10-01 2.5 Ω 100 W |
| Aggiornamenti HW di Automation Studio | Versione (data) | Download |
|---|---|---|
| V2.6 HW Upgrade (80PS080X3.10-01) | EXE / 3 MB | |
| V3.0 HW Upgrade (80PS080X3.10-01) | EXE / 1 MB | |
| V4.0 HW Upgrade (80PS080X3.10-01) | EXE / 2 MB |
| Certificati | Versione (data) | Download |
|---|---|---|
| E225616 UL Certificate of Compliance ACOPOSmicro | PDF / 83 KB | |
| EU Declaration ACOPOSmicro | PDF / 201 KB | |
| UK Declaration ACOPOSmicro | PDF / 109 KB |
| Documentazione | Versione (data) | Download |
|---|---|---|
| ACOPOSmicro User's Manual | PDF / 66 MB | |
| Data sheet 80PS080X3.10-01 | PDF / 10 MB |
| E-CAD (Electro o EPLAN Template) | Versione (data) | Download |
|---|---|---|
| Power supplies EPLAN P8 | EXE / 14 MB |
| M-CAD (Mechan. Template) | Versione (data) | Download |
|---|---|---|
| 3D file STEP 80PS080X3.10-01 | ZIP / 373 KB |