Short description
| Communication module | 1x RS232 |
General information
| B&R ID code | 0x1F27 |
| Status indicators | Module status, data transfer |
| Diagnostics | |
| Module status | Yes, using LED status indicator |
| Data transfer | Yes, using LED status indicator |
| Power consumption | 0.35 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| Certifications | |
| CE | Yes |
| UKCA | Yes |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL |
cULus E115267 Industrial control equipment |
| HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV |
Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV |
EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
| EAC | Yes |
| KC | Yes |
Interfaces
| Interface IF1 | |
| Signal | RS232 |
| Variant | 9-pin male DSUB connector |
| Max. distance | 900 m |
| Transfer rate | Max. 115.2 kbit/s |
| Network-capable | No |
| FIFO buffer | 16 bytes in the transmit and receive directions |
| Handshake lines | RTS, CTS |
| Controller | UART type 16C550 compatible |
| Data formats | |
| Data bits | 5 to 8 |
| Parity | Yes / No / Even / Odd |
| Stop bits | 1 or 2 |
Electrical properties
| Electrical isolation | PLC isolated from RS232 (IF1) |
Operating conditions
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | - |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Slot | In the X20 PLC |
Référence produit:
X20IF1020Description:
- The RS232 interface can be configured as an online interface
The interface module can be used to expand the X20 CPU for specific applications. It is equipped with an RS232 interface.
| Automation Studio HW Upgrades | Version (date) | Téléchargement |
|---|---|---|
| V2.7 HW Upgrade (X20IF1020) | EXE / 481 KB | |
| V2.7 HW Upgrade (X20IF1020) | EXE / 998 KB | |
| V3.0 HW Upgrade (X20IF1020) | EXE / 481 KB | |
| V3.0 HW Upgrade (X20IF1020) | EXE / 1 MB | |
| V4.0 HW Upgrade (X20IF1020) | EXE / 769 KB |
| Documentation | Version (date) | Téléchargement |
|---|---|---|
| Data sheet X20IF1020 | PDF / 135 KB | |
| Installation- / EMC-Guide | PDF / 20 MB | |
| X20 System User´s Manual | PDF / 7 MB |
| E-CAD (modèles Electro ou EPLAN) | Version (date) | Téléchargement |
|---|---|---|
| X20 EPLAN P8 from V2.4 | EXE / 160 MB |
| M-CAD (modèles mécaniques) | Version (date) | Téléchargement |
|---|---|---|
| 3D File DXF/STEP X20 Interface module X20IF1020, 1030 | ZIP / 1 MB |