Short description
Communication module | DALI master |
General information
B&R ID code | 0xDE85 |
Diagnostics | |
Module status | Yes, using LED status indicator and software |
Bus status | Yes, using LED status indicator and software |
Power consumption | |
Bus | 0.2 W |
Internal I/O | 0.4 W |
Additional power dissipation caused by actuators (resistive) [W] | 4 |
Insulation voltages | |
Channel - Bus | 510 VAC / 1 minute |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
UL |
cULus E115267 Industrial control equipment |
HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
EAC | Yes |
DALI bus
Insulation system | Basic insulation |
Open-circuit voltage | 16.5 V ±5% |
Short-circuit proof | Yes (current limiting) |
Signal voltage | |
Low | -6.5 V to 6.5 V (typically 0 V) |
High | 11.5 V to 20.5 V (typically 16 V) |
Signal current | |
Low | ≤250 mA (internally limited) |
High | ≤130 mA at voltage ≥11.5 V |
Transfer rate | 1200 baud |
Maximum number of slaves | 64 |
Data signal slew rate (Manchester bi-phase) | |
Falling edge | 10 μs ≤ tfall ≤ 100 μs |
Rising edge | 10 μs ≤ trise ≤ 100 μs |
Electrical properties
Electrical isolation | Channel isolated from bus |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Note |
Order 1x terminal block X20TB06 or X20TB12 separately. Order 1x bus module X20BM11 separately. |
Pitch | 12.5+0.2 mm |
Référence produit:
X20CS1013Description:
- Integrated power supply
- Up to 64 operating devices (individual addresses)
- Up to 16 groups (group addresses)
- Up to 16 scenes (scene lighting values)
The module is a DALI control device with an integrated power supply. Up to 64 operating devices can be connected.
DALI stands for Digital Addressable Lighting Interface and enables easy and safe control of light fixtures using a standardized digital operating device interface. The DALI bus conforms with EN 62386 series of standards and is now supported by many electronic ballast manufacturers.
Accessoires obligatoires
Bus modules
Automation Studio HW Upgrades | Version (date) | Téléchargement |
---|---|---|
V2.7 HW Upgrade (X20CS1013) | EXE / 906 KB | |
V3.0 HW Upgrade (X20CS1013) | EXE / 1 MB | |
V4.0 HW Upgrade (X20CS1013) | EXE / 614 KB |
Certifications | Version (date) | Téléchargement |
---|---|---|
244665 CSA HazLoc CoC X20, X67 | PDF / 158 KB | |
E115267 UL CoC X20 | PDF / 1 MB | |
EU Declaration ATEX X20 | PDF / 218 KB | |
EU Declaration of conformity PLC X20 | PDF / 169 KB | |
FTZU 09 ATEX 0083X | PDF / 771 KB | |
UK Declaration PLC X20 | PDF / 151 KB |
Documentation | Version (date) | Téléchargement |
---|---|---|
Datasheet X20CS1013 | PDF / 377 KB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X20 System User´s Manual | PDF / 7 MB |
E-CAD (modèles Electro ou EPLAN) | Version (date) | Téléchargement |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 MB |
M-CAD (modèles mécaniques) | Version (date) | Téléchargement |
---|---|---|
3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
Dimensions PDF X20 Electronic module | PDF / 3 KB |