General information
Controller
Processor | netX 500 |
Dual-port memory | 64 kB |
Fieldbus
Type | Ethernet |
Variant | 2x RJ45, Cat 5 |
Line length | Max. 100 m |
Transfer rate | 10/100 Mbit/s |
Cyclic data | Max. 6144 bytes |
Acyclic data | Read/Write record, max. 4096 bytes/request |
Functions |
Alarm handling Context management via CLRPC DCP Max. 32 devices Minimum cycle time 1 ms One buffer available per device for diagnostic data |
Electrical properties
Nominal voltage | +3.3 V ±5% |
Nominal current | 650 mA |
Ambient conditions
Temperature | |
Operation | 0 to 55°C |
Mechanical properties
Dimensions | |
Width | 120 mm |
Height | 73.2 mm |
Depth | 18.5 mm |
Slot | Standard PCI half-size module, plug and play |
Installation in | |
B&R Automation PC | Yes |
B&R Panel PC | Yes |
Desktop PC | Yes |
Référence produit:
5ACPCI.XPNM-00Description:
The 5ACPCI.XPNM-00 is equipped with 2 Ethernet interfaces and can therefore be integrated as a master into a PROFINET network. Data is exchanged via the dual-ported memory.
Automation Studio HW Upgrades | Version (date) | Téléchargement |
---|---|---|
V3.0 HW Upgrade (5ACPCI.XPNM-00) | EXE / 729 KB | |
V4.0 HW Upgrade (5ACPCI.XPNM-00) | EXE / 1,007 KB |
Documentation | Version (date) | Téléchargement |
---|---|---|
B&R Hilscher Fieldbus cards | PDF / 3 MB | |
Datasheet 5ACPCI.XPNM-00 | PDF / 562 KB |
E-CAD (modèles Electro ou EPLAN) | Version (date) | Téléchargement |
---|---|---|
APC EPLAN P8 from V2.4 | EXE / 99 MB |
Firmware Upgrades | Version (date) | Téléchargement |
---|---|---|
Hilscher firmware (5ACPCI.XPNM-00) | ZIP / 341 KB |