3UM161.6

Short description

I/O module	14 digital inputs, 2 digital outputs, 4 analog inputs, 3 analog outputs, potentiometer power supply, special functions

General information

Status indicators	Converter function, configuration per comparator, power supply for digital inputs, I/O function per digital channel
Diagnostics
Power supply for digital inputs	Yes, using LED status indicator and software
Digital outputs	Yes, using LED status indicator
Power consumption
24 VDC	4.0 W (+1.5 W for potentiometer power supply)
5 VDC	2.0 W
Total	6.0 W
Electrical isolation
Channel - Channel	No
Channel - PLC	Yes
Potentiometer power supply - PLC	Yes
Analog - Potentiometer power supply	No
Digital - Analog	Yes
Certifications
CE	Yes
UKCA	Yes
UL	cULus E115267 Industrial control equipment

Potentiometer power supply

Voltage	±10 V
Load	4 x 1 kΩ parallel, total max. ±80 mA
Short-circuit proof	Yes
Basic accuracy	±0.4% at 25°C

Digital inputs

Quantity	14 (+2 if the digital outputs are used as digital inputs)
Nominal voltage	24 VDC
Input circuit	Sink or source
Input filter
Hardware	≤1 ms
Software	-
Additional functions	Event counting, period measurement, latch input (comparator input)

Analog inputs

Quantity	4
Input	±10 V
Input type	Differential input
Digital converter resolution	14-bit
Conversion time	<45 µs for all inputs
Output format	INT
Input impedance in signal range	10 MΩ
Input protection	Protection against wiring with supply voltage
Basic accuracy	±0.05% at 25°C

Digital outputs

Quantity	2
Nominal voltage	24 VDC
Nominal output current	10 mA to 2 A
Total nominal current	2.01 A
Output circuit	Source
Output protection	Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply
Sensor power supply	External
Additional functions	Fast comparator output (10 µs), both outputs can also be used as digital inputs

Analog outputs

Quantity	3
Output	±10 V
Digital converter resolution	12-bit
Conversion time	<45 µs for all outputs
Switch on/off behavior	Internal enable relay for startup and errors
Output protection	Protection against wiring with supply voltage, short-circuit proof
Basic accuracy	±0.05% at 25°C

Operating conditions

Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation	0 to 60°C
Storage	-25 to 70°C
Relative humidity
Operation	5 to 95%

Mechanical properties

Note	Order 2x TB718 terminal blocks separately
Dimensions
Width	System 2005 single-width
Can be installed on
Base unit	Yes
Expansion unit	Yes

Référence produit:

3UM161.6

Description:

2005 universal mixed module, 1 x 4 analog inputs ±10 V, 14-bit, 1 x 3 analog outputs ±10 V, 12-bit, 1 x 14 digital inputs 24 VDC, 1 ms, 1 digital output 24 VDC, 2 A, 500 µs, 1 digital output 24 VDC, 10 mA, 10 µs, both outputs usable as inputs, order 2x TB718 terminal blocks separately!

Accessoires obligatoires

Terminal blocks

7TB718.9	Accessory terminal block, 18-pin, screw clamp terminal block 1.5 mm²
7TB718.91	Accessory terminal block, 18-pin, cage clamp terminal block 1.5 mm²

Documentation	Version (date)	Téléchargement
Datasheet 3UM161.6		PDF / 1 Mo Identification pour téléchargement