3UM161.6

Short description
I/O module 14 digital inputs, 2 digital outputs, 4 analog inputs, 3 analog outputs, potentiometer power supply, special functions
General information
Status indicators Converter function, configuration per comparator, power supply for digital inputs, I/O function per digital channel
Diagnostics
Power supply for digital inputs Yes, using LED status indicator and software
Digital outputs Yes, using LED status indicator
Power consumption
24 VDC 4.0 W (+1.5 W for potentiometer power supply)
5 VDC 2.0 W
Total 6.0 W
Electrical isolation
Channel - Channel No
Channel - PLC Yes
Potentiometer power supply - PLC Yes
Analog - Potentiometer power supply No
Digital - Analog Yes
Certifications
CE Yes
UKCA Yes
UL cULus E115267
Industrial control equipment
EAC Yes
Potentiometer power supply
Voltage ±10 V
Load 4 x 1 kΩ parallel, total max. ±80 mA
Short-circuit proof Yes
Basic accuracy ±0.4% at 25°C
Digital inputs
Quantity 14 (+2 if the digital outputs are used as digital inputs)
Nominal voltage 24 VDC
Input circuit Sink or source
Input filter
Hardware ≤1 ms
Software -
Additional functions Event counting, period measurement, latch input (comparator input)
Analog inputs
Quantity 4
Input ±10 V
Input type Differential input
Digital converter resolution 14-bit
Conversion time <45 µs for all inputs
Output format INT
Input impedance in signal range 10 MΩ
Input protection Protection against wiring with supply voltage
Basic accuracy ±0.05% at 25°C
Digital outputs
Quantity 2
Nominal voltage 24 VDC
Nominal output current 10 mA to 2 A
Total nominal current 2.01 A
Output circuit Source
Output protection Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply
Sensor power supply External
Additional functions Fast comparator output (10 µs), both outputs can also be used as digital inputs
Analog outputs
Quantity 3
Output ±10 V
Digital converter resolution 12-bit
Conversion time <45 µs for all outputs
Switch on/off behavior Internal enable relay for startup and errors
Output protection Protection against wiring with supply voltage, short-circuit proof
Basic accuracy ±0.05% at 25°C
Operating conditions
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation 0 to 60°C
Storage -25 to 70°C
Relative humidity
Operation 5 to 95%
Mechanical properties
Note Order 2x TB718 terminal blocks separately
Dimensions
Width System 2005 single-width
Can be installed on
Base unit Yes
Expansion unit Yes
Materiaalnummer:
3UM161.6
Omschrijving:
2005 universal mixed module, 1 x 4 analog inputs ±10 V, 14-bit, 1 x 3 analog outputs ±10 V, 12-bit, 1 x 14 digital inputs 24 VDC, 1 ms, 1 digital output 24 VDC, 2 A, 500 µs, 1 digital output 24 VDC, 10 mA, 10 µs, both outputs usable as inputs, order 2x TB718 terminal blocks separately!
Vereiste toebehoren
Terminal blocks
7TB718.9 Accessory terminal block, 18-pin, screw clamps 1.5 mm²
7TB718.91 Accessory terminal block, 18-pin, cage clamp terminal block 1.5 mm²
Documentatie Versie (Datum) Download
Datasheet 3UM161.6 PDF / 1 MB

Graag land en taal kiezen

B&R Logo