Please choose country and language

Short description
I/O module 14 digital inputs, 2 digital outputs, 4 analog inputs, 3 analog outputs, potentiometer supply, special functions
General information
Status indicators Conversion function, configuration per comparator, supply for digital inputs, I/O function per digital channel
Diagnostics
Power supply for digital inputs Yes, using status LED and software status
Digital outputs Yes, with status LED
Power consumption
24 VDC 4.0 W (+1.5 W for potentiometer supply)
5 VDC 2.0 W
Total 6.0 W
Electrical isolation
Channel - Channel No
Channel - PLC Yes
Potentiometer power supply - PLC Yes
Analog - Potentiometer power supply No
Digital - Analog Yes
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
EAC Yes
Potentiometer power supply
Voltage ±10 V
Load 4x 1 kΩ parallel, total of max. ±80 mA
Short-circuit proof Yes
Basic accuracy ±0.4% at 25°C
Digital inputs
Quantity 14 (+ 2 if the digital outputs are used as digital inputs)
Nominal voltage 24 VDC
Input circuit Sink or source
Input filter
Hardware ≤ 1 ms
Software -
Additional functions Event counter, period measurement, latch input (comparator input)
Analog inputs
Quantity 4
Input ±10 V
Input type Differential input
Digital converter resolution 14-bit
Conversion time <45 µs for all inputs
Output format INT
Input impedance in signal range 10 MΩ
Input protection Protection against wiring with supply voltage
Basic accuracy ±0.05% at 25°C
Digital outputs
Quantity 2
Nominal voltage 24 VDC
Nominal output current 10 mA to 2 A
Total nominal current 2.01 A
Output circuit Source
Output protection Thermal cutoff for overcurrent and short circuit, integrated protection for switching inductances, reverse polarity protection for output supply
Sensor power supply External
Additional functions High-speed comparator output (10 µs), both outputs can also be used as digital inputs
Analog outputs
Quantity 3
Output ±10 V
Digital converter resolution 12-bit
Conversion time <45 µs for all outputs
Switch on/off behavior Internal enable relay for booting and errors
Output protection Protection against wiring with supply voltage, short circuit protection
Basic accuracy ±0.05% at 25°C
Operating conditions
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation 0 to 60°C
Storage -25 to 70°C
Relative humidity
Operation 5 to 95%
Mechanical properties
Note Order 2x TB718 terminal blocks separately
Dimensions
Width System 2005 single-width
Can be installed on
Base unit Yes
Expansion unit Yes
Material number:
3UM161.6
Description:
2005 universal mixed module, 1 x 4 analog inputs ±10 V, 14-bit, 1 x 3 analog outputs ±10 V, 12-bit, 1 x 14 digital inputs 24 VDC, 1 ms, 1 digital output 24 VDC, 2 A, 500 µs, 1 digital output 24 VDC, 10 mA, 10 µs, both outputs can be used as inputs, order 2x TB718 terminal blocks separately.
Mandatory Accessories
Terminal blocks
7TB718.9 Accessory terminal block, 18-pin, screw clamps 1.5 mm²
7TB718.91 Accessory terminal block, 18-pin, cage clamp terminal block 1.5 mm²
Documentation Version (Date) Download
Datasheet 3UM161.6 PDF / 696 KB

Please choose country and language

B&R Logo