General information
Controller
| nvSRAM | |
| Size | 512 kB |
| Data retention | 20 years |
| Read/Write endurance | Min. 1,000,000 |
| Remanent variables in power failure mode | 256 kB (for e.g. Automation Runtime, see Automation Help) |
Interfaces
Electrical properties
| Power consumption | 1.75 W |
Operating conditions
| Pollution degree per EN 61131-2 | Pollution degree 2 |
Ambient conditions
| Temperature | |
| Operation | -20 to 55°C |
| Storage | -20 to 60°C |
| Transport | -20 to 60°C |
| Relative humidity | |
| Operation | 5 to 90%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Weight | 25 g |
Número de material:
5ACCIF01.FPLK-000Descripción:
- 1x POWERLINK interface for real-time communication
- 512 kB nvSRAM
- Integrated hub for economical wiring
- Configurable ring redundancy
- Poll-response chaining
- Compatible with APC2100/PPC2100 and APC2200/PPC2200
Interface option 5ACCIF01.FPLK-000 is equipped with 2 female RJ45 connectors; both connectors are connected to an integrated POWERLINK hub. In addition, 512 kB nvSRAM is installed.
| Actualizaciones de firmware | Versión (fecha) | Descargar |
|---|---|---|
| APC2100 Firmware Upgrade (MTCX, SDLT, SDL3T) | ZIP / 2 MB | |
| PPC2100 Firmware Upgrade (MTCX) | ZIP / 4 MB |
| Actualizaciones de hardware de Automation Studio | Versión (fecha) | Descargar |
|---|---|---|
| V4.1 HW Upgrade (5ACCIF01.FPLK-000) | EXE / 812 KB | |
| V6.0 HW Upgrade (5ACCIF01.FPLK-000) | EXE / 828 KB |
| E-CAD (plantillas Electro o EPLAN) | Versión (fecha) | Descargar |
|---|---|---|
| APC EPLAN P8 from V2.4 | EXE / 99 MB |