Please choose country and language

Short description
I/O module 4 inputs for potentiometer displacement gauge
General information
B&R ID code 0x9957
Status indicators Channel status, operating status, module status
Diagnostics
Module run/error Yes, using status LED and software
Input Yes, using status LED and software
Connection type
X2X Link M12, B-keyed
Inputs 4x M12, A-keyed
I/O power supply M8, 4-pin
Power consumption
Bus 0.75 W
Internal I/O 2 W
Certifications
CE Yes
ATEX Zone 2, II 3G Ex nA IIA T5 Gc
IP67, Ta = 0 - Max. 60°C
TÜV 05 ATEX 7201X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
EAC Yes
KC Yes
I/O power supply
Nominal voltage 24 VDC
Voltage range 18 to 30 VDC
Integrated protection Reverse polarity protection
Potentiometer power supply
Short-circuit proof Yes
Potentiometer supply voltage Upot 4.5 V / max. 50 mA
Voltage drop for short-circuit protection at 50 mA Max. 0.13 VDC
Potentiometer, displacement gauge
Input type Single ended input in the range from 0 to Upot
Digital converter resolution 14-bit
Measurement sensor 0.5 to 10 kΩ, potentiometer
Conversion time <200 µs for all channels
Output format INT (16-bit 2s complement)
Short-circuit protection Upot Yes
Influence of cable length The shielded twisted pair cable should be as short as possible and run separately to the sensor (isolated from load circuit) without intermediate terminals
Common-mode range 0 to Upot
Isolation voltage between input and bus 500 VEff
Quantization; LSB value (14-bit) 275 µV
Conversion procedure Sample & Hold
Output of digital value
Open GND circuit 0x7FFF
Open circuit on slider 0x7FFF
Open circuit on Upot 0x0000
Valid range of values 0x0000 - 0x7FFF
Input filter
Cutoff frequency 10 kHz
Slope 60 dB/Dec.
Electrical properties
Electrical isolation Bus isolated from analog input
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP67
Ambient conditions
Temperature
Operation -25 to 60°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Mechanical properties
Dimensions
Width 53 mm
Height 85 mm
Depth 42 mm
Weight 195 g
Torque for connections
M8 Max. 0.4 Nm
M12 Max. 0.6 Nm
Material number:
X67AI4850
Description:
  • 4 inputs for potentiometer displacement gauge

This module is a 4-channel analog input module. It is used to evaluate potentiometer displacement gauges.

Automation Studio HW Upgrades Version (Date) Download
V2.6 HW Upgrade (X67AI4850) EXE / 1 MB
V3.0 HW Upgrade (X67AI4850) EXE / 458 KB
V3.0 HW Upgrade (X67AI4850) EXE / 2 MB
V4.0 HW Upgrade (X67AI4850) EXE / 1 MB
Certificates Version (Date) Download
244665 CSA HazLoc Certificate of Compliance X20, X67 PDF / 56 KB
E115267 UL CoC X67 PDF / 84 KB
TÜV 05 ATEX 7201 X PDF / 129 KB
Documentation Version (Date) Download
Datasheet X67AI4850 PDF / 325 KB
X67 System User´s Manual PDF / 19 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
X67 EPLAN P8 EXE / 85 MB
X67 EPLAN P8 from V2.4 EXE / 105 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D File DXF/STEP X67 ZIP / 1 MB

Please choose country and language

B&R Logo