General information
LEDs L1, L2, L3
B&R ID code 0xE53F
CE Yes
UL cULus E115267
Industrial control equipment
HazLoc cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
DNV Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: A (0.7 g)
EMC: B (bridge and open deck)
KR Yes
Temperature: 5 - 55°C
Vibration: 0.7 g
EMC: Bridge and open deck
EAC Product family certification
Size 32 kB
Data retention 10 years
Read/Write endurance Min. 1012 times/byte
Remanent variables in power failure mode 32 kB
(for e.g. Automation Runtime, see Automation Help)
Quantity 1
Type RS232, modem not supported, not galvanically isolated
Variant 10-pin, male
UART 16550-compatible, 16-byte FIFO buffer
Max. baud rate 115 kbit/s
Quantity 1
Type Type 4
Variant RJ45, shielded
Transfer rate 100 Mbit/s
Transfer 100BASE-TX
Line length Max. 100 m between two stations (segment length)
Quantity 1
Variant 10-pin, male, not galvanically isolated
Transfer rate Max. 1 Mbit/s
Terminating resistor
Type Can be switched on and off with slide switch
Default setting Off
Electrical properties
Power consumption 1.75 W
Operating conditions
Pollution degree per EN 61131-2 Pollution degree 2
Ambient conditions
Operation -20 to 55°C
Storage -20 to 60°C
Transport -20 to 60°C
Relative humidity
Operation 5 to 90%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Weight 25 g
Material number:
  • 1x POWERLINK interface managing or controlled node
  • 1x CAN bus master interface
  • 1x RS232 interface
  • 32 kB FRAM
  • Compatible with APC2100/PPC2100 and APC2200/PPC2200

Interface option 5ACCIF01.FPSC-000 is equipped with a POWERLINK, RS232 and CAN bus master interface. In addition, 32 kB FRAM is installed.

Optional Accessories
Terminal blocks
0TB1210.3100 Connector 300 VDC - 10-pin female - Cage clamp terminal block - Protected against vibration by the screw flange
Automation Studio HW Upgrades Version (Date) Download
V4.0 HW Upgrade (5ACCIF01.FPSC-000) EXE / 643 KB
V4.1 HW Upgrade (5ACCIF01.FPSC-000) EXE / 584 KB
Certificates Version (Date) Download
DNV Type Approval Certificate - Automation PC 2100 PDF / 218 KB
Documentation Version (Date) Download
Automation PC 2100 Device number key PDF / 116 KB
Automation PC 2100 User's manual PDF / 15 MB
Automation PC 2200 User's manual PDF / 13 MB
Panel PC 2100 (AP5000) Swing arm devices user's manual PDF / 43 MB
Panel PC 2100 Built-in devices User's manual PDF / 40 MB
Panel PC 2100 Swing arm devices User´s Manual PDF / 14 MB
Panel PC 2200 (AP5000) swing arm devices user's manual PDF / 29 MB
Panel PC 2200 Panel mount devices User's manual PDF / 20 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
APC EPLAN P8 from V2.4 EXE / 99 MB
Firmware Upgrades Version (Date) Download
APC2100 Firmware Upgrade (MTCX, SDLT, SDL3T) ZIP / 2 MB
PPC2100 Firmware Upgrade (MTCX) ZIP / 4 MB

Please choose country and language

B&R Logo