24 VDC power supply module for X20 standalone devices
General information
Status indicators
Operating state, module status
Diagnostics
Module run/error
Yes, using LED status indicator
Overload
Yes, using LED status indicator
Power consumption
1.34 W
Certification
CE
Yes
cULus
Yes
cCSAus HazLoc Class 1 Division 2
Yes
ATEX Zone 2
Yes
KC
Yes
Input supply
Input voltage
24 VDC -15% / +20%
Input current
Max. 0.7 A
Fuse
Integrated, cannot be replaced
Reverse polarity protection
Yes
Output supply
Overload behavior
Short-circuit proof, temporary overload
Nominal output power
Horizontal installation
7 W at 45°C and 5 W at 55°C
Vertical installation
7 W at 40°C and 5 W at 50°C
Operating conditions
Mounting orientation
Horizontal
Yes
Vertical
Yes
Installation at altitudes above sea level
0 to 2000 m
No limitation
>2000 m
Reduction of ambient temperature by 0.5°C per 100 m
Protection in accordance with EN 60529
IP20
Environmental conditions
Temperature
Operation
Horizontal installation
-25 to 60°C
Vertical installation
-25 to 50°C
Derating
See section "Derating".
Storage
-40 to 85°C
Transport
-40 to 85°C
Relative humidity
Operation
5 to 95%, non-condensing
Storage
5 to 95%, non-condensing
Transport
5 to 95%, non-condensing
Mechanical characteristics
Note
Order 1x terminal block X20TB12 separately.
Spacing
12.5+0.2 mm
Material number:
X20PS8002
Description:
Supply for X20 stand-alone devices
No electrical isolation between the I/O supply and the device power supply
The supply module is used to supply X20 stand-alone devices. These include e.g. the X20HB8884 POWERLINK compact link selector and the X20HB8880 stand alone hub.
