24 VDC power supply module for X20 standalone devices
General information
Status indicators
Operating state, module status
Diagnostics
Module run/error
Yes, using LED status indicator
Overload
Yes, using LED status indicator
Power consumption
1.34 W
Certifications
CE
Yes
UKCA
Yes
CRA (Cyber Resilience Act)
In preparation
ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL
cULus E115267 Industrial control equipment
HazLoc
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV
Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
CCS
Yes
LR
ENV1
KR
Yes
ABS
Yes
BV
EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck
KC
Yes
Input power supply
Input voltage
24 VDC -15% / +20%
Input current
Max. 0.7 A
Fuse
Integrated, cannot be replaced
Reverse polarity protection
Yes
Output power supply
Overload characteristics
Short-circuit proof, temporary overload
Nominal output power
Horizontal mounting orientation
7 W at 45°C and 5 W at 55°C
Vertical mounting orientation
7 W at 40°C and 5 W at 50°C
Electrical properties
Electrical isolation
I/O power supply not isolated from device power supply
Operating conditions
Mounting orientation
Horizontal
Yes
Vertical
Yes
Installation elevation above sea level
0 to 2000 m
No limitation
>2000 m
Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529
IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation
-25 to 60°C
Vertical mounting orientation
-25 to 50°C
Derating
See section "Derating".
Storage
-40 to 85°C
Transport
-40 to 85°C
Relative humidity
Operation
5 to 95%, non-condensing
Storage
5 to 95%, non-condensing
Transport
5 to 95%, non-condensing
Mechanical properties
Note
Order 1x terminal block X20TB12 separately.
Pitch
12.5+0.2 mm
Materiaalnummer:
X20PS8002
Omschrijving:
Supply for X20 stand-alone devices
No electrical isolation between the I/O supply and the device power supply
The supply module is used to supply X20 stand-alone devices. These include e.g. the X20HB8884 POWERLINK compact link selector and the X20HB8880 stand alone hub.
