0PS3201.3

Status display	Green LED (DC OK), threshold value U_out > 36 V
Isolation voltage
Input - Output	6 kV DC (type test) 3.1 kV DC (routine test)
Input - PE	4 kV DC (type test) 3.1 kV DC (routine test)
Active DC OK switch output	See section "Dry switching contact".
Connection type	Push-in connection
Certification
CE	Yes
cULus

Nominal input voltage	400 to 500 VAC
Input voltage	3x 400 to 500 VAC -20% to +10% 2x 400 to 500 VAC ±10%
Frequency	50 to 60 Hz
Starting current	<21 A
Current consumption	3x 1.5 A / 3x 1.2 A (3x 400/500 VAC) 2x 2.6 A / 2x 2.1 A (2x 400/500 VAC)
I²t	<0.94 A²s
Power failure bypass	Typ. 34 ms (3x 400 VAC) Typ. 34 ms (3x 480 VAC)
Discharge current to PE	<3.5 mA
Protective circuit	Varistor transient protection
Internal fuse	6.3 A
Required line fuse for device and line protection	See section "Input protection".

Nominal voltage	48 VDC
Output power	960 W / Max. 1440 W (5 s)
Setting range for output voltage	40 to 56 VDC
Control deviation	<0.1% (input voltage change ±10%) <3% (load change, dynamic) <1% (load change, static)
Rise time	≤1 s (U_OUT (10 to 90%))
Residual ripple	Typ. 50 mV_SS
Can be connected in parallel	Yes, for increased efficiency and redundancy
Can be connected in series	Yes, for increased output voltage (observe SELV limit)
Protection functions	Short-circuit protection

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation at elevations above sea level
Maximum	5000 m
Ventilation / Cooling	Normal convection, no fan required
EN 60529 protection	IP20
Rated protection	I

Temperature
Operation	-25 to 70°C
Derating	See section "Derating".
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	Max. 95%, non-condensing
Vibration
Operation	10 to 50 Hz, amplitude ±0.2 mm 50 to 150 Hz, 2.3 g, 90 min, per IEC 60068-2-6
Shock
Operation	18 ms, 30 g, in each direction, per IEC 60068-2-27
Degree of pollution	2
Climate category	3K3, per EN 60721

Housing
Material	Aluminum sheet, plastic cover PA
Paint	No protective coating
Installation	Easy top-hat rail installation (NS 35 rails, EN 60715)
Dimensions
Width	90 mm
Height	135 mm
Depth	167 mm
Weight	1938 g

0PS3201.3

Minimum space requirement in the control cabinet due to a thin design
Robust and reliable thanks to dynamic boost with a strong output characteristic curve for starting heavy loads
Optical and preventive function monitoring with three-color LED and dry switching contact
Easy handling due to push-in connections, label fields, wire stripping mark and tamper-resistant setup
Can be connected in parallel for increased power and redundancy
Temperature range: -25°C to +70°C
Worldwide use thanks to AC and DC wide-range input
International certification package

48 VDC power supply unit, 3-phase, 20 A, input 400 to 500 VAC, wide range, thin design, top-hat rail installation

Certifikáty	Verze (datum)	Ke stažení
EU Declaration Power supplies		PDF / 309 KB Pro stažení je potřeba se přihlásit.
UK Declaration 0PSxxx1.3		PDF / 267 KB Pro stažení je potřeba se přihlásit.

Dokumentace	Verze (datum)	Ke stažení
Data sheet 0PS3201.3		PDF / 5 MB Pro stažení je potřeba se přihlásit.

M-CAD (Mechan. Templates)	Verze (datum)	Ke stažení
3D STP file 0PS3201.3		ZIP / 465 KB Pro stažení je potřeba se přihlásit.