5PC310.L800-01

General information

LEDs	1x CF (yellow) 1x combined Power (red or green) and User (yellow) 2x Ethernet 1 - 10/100 (green) and Link Act (yellow) 2x Ethernet 2 - 10/100 (green) and Link Act (yellow)
Fans	No
B&R ID code	0xA62E
Battery
Type	Renata 950 mAh
Service life	4 years
Removable	Yes
Variant	Lithium ion
Power button	Yes
Reset button	Yes
Backup capacitor
Buffer time	None
Certifications
CE	Yes
UKCA	Yes
UL	cULus E115267 Industrial control equipment

Controller

Bootloader	BIOS
Processor
Type	AMD Geode LX800
Clock frequency	500 MHz
L1 cache	128 kB (64 kB I-cache / 64 kB D-cache)
L2 cache	128 kB
External bus	400 MHz
Expanded command set	MMX technology, 3D Now
Floating point unit (FPU)	Yes
Real-time clock
Accuracy	At 25°C: Typ. 30 ppm (2.5 seconds) per day
Battery-backed	Yes

Display

Supported Automation Panel 900 variants	10.4" VGA TFT color 12.1" SVGA TFT color 15" XGA TFT color 17" SXGA TFT color 19" SXGA TFT color

Interfaces

COM1
Type	RS232, modem supported, not galvanically isolated
Variant	9-pin male DSUB connector
UART	16C550-compatible, 16-byte FIFO buffer
Max. baud rate	115 kbit/s
CompactFlash slot 1
Type	Type I
USB
Quantity	Up to 3 (Automation Panel onboard interfaces)
Type	USB 2.0
Variant	Type A
Current-carrying capacity	Max. 500 mA per connection
Ethernet
Quantity	2
Transfer rate	10/100 Mbit/s
Max. baud rate	100 Mbit/s

Electrical properties

Nominal current	See the technical data of AP900 devices.
Bleeder resistance	1 MΩ
Inrush current	See the technical data of AP900 devices.
Power consumption	Typ. 5.5 W, max. 8 W
Voltage range	18 to 30 VDC
Galvanic isolation	Yes

Mechanical properties

Weight	Approx. 233 g
Locating screws
Quantity	2
Max. tightening torque	0.5 Nm

Materiálové číslo:

5PC310.L800-01

Popis:

Can be installed in Automation Panel 900 systems
500 MHz processor
2x Ethernet 10/100 Mbit interfaces
512 MB SRAM onboard
Fan-free operation

Panel PC 300 slot for Automation Panel 900, 512 MB SDRAM, CompactFlash slot (type I), 2x ETH 10/100, RS232, USB 2.0 (via integrated USB 2.0 interfaces of the Automation Panel) battery, 24 VDC (order screw clamp terminal block 0TB103.9 or cage clamp terminal block 0TB103.91 separately).

Povinné příslušenství

Accessories

0TB103.9	Connector 24 VDC - 3-pin, female - Screw clamp terminal block 3.31 mm²
0TB103.91	Connector 24 VDC - 3-pin, female - Cage clamp terminal block 3.31 mm²

BIOS	Verze (datum)	Ke stažení
BIOS Upgrade		ZIP / 250 KB Pro stažení je potřeba se přihlásit.

Dokumentace	Verze (datum)	Ke stažení
Panel PC 300 User's manual		PDF / 14 MB Pro stažení je potřeba se přihlásit.

E-CAD (Electro or EPLAN Templates)	Verze (datum)	Ke stažení
APx00 EPLAN P8 from V2.4		EXE / 47 MB Pro stažení je potřeba se přihlásit.

Firmware Upgrades	Verze (datum)	Ke stažení
Firmware Upgrade (MTCX)		ZIP / 124 KB Pro stažení je potřeba se přihlásit.