4P3040.01-490

General information

Certifications
CE	Yes
UL	cULus E115267 Industrial control equipment

Controller

Standard memory
System PROM	600 kB FlashPROM
User PROM	1.4 MB FlashPROM
User RAM	700 kB SRAM
Data buffering	Lithium battery 3 V / 950 mAh
Voltage monitoring	The internal power supply is monitored for overvoltage and undervoltage.
Typical instruction cycle time	0.5 µs (average value with 70% bit processing and 30% analog processing)
Watchdog	Yes
Additional I/O processor	Takes over operation of the I/O data points

Display

Backlight
Brightness	150 cd/m²
Half-brightness time	50,000 h
Type	Monochrome LCD
Diagonal	5.7" (144 mm)
Resolution	QVGA, 320 x 240 pixels

Interfaces

Interface IF1
Type	RS232
Variant	9-pin male DSUB connector
Electrical isolation	No
Max. baud rate	115.2 kbit/s

Digital inputs

Electrical isolation
Group isolation	Input group - Output group
Channel - Bus	Yes
Channel - Channel	No
Quantity	10
Nominal voltage	24 VDC
Input circuit	Sink
Input filter	<1 ms
Additional functions	4x TPU
Input current at nominal voltage	Approx. 4 mA

Digital outputs

Electrical isolation
Group isolation	Input group - Output group
Channel - Bus	Yes
Channel - Channel	No
Quantity	8 + 1 dry relay contacts
Nominal voltage	24 VDC
Nominal output current	0.4 A
Total nominal current	3.2 A
Output circuit	Source
Output protection	Overload protection
Internal protective circuit	Yes

Keys

Function keys	15
Soft keys	8
Cursor keys	5
Number block	12

Power supply unit

Nominal voltage	24 VDC
Power consumption	Max. 20 W

Peripherals

PC card slot
Memory size
FlashPROM	Max. 4 MB
SRAM	Max. 4 MB
Quantity	1
Slots for B&R 2003 screw-in modules
Quantity	6
For CAN bus communication	1
For TPU	3
For serial asynchronous communication	3
Real-time clock	1 s resolution, nonvolatile
Status indicators	LEDs
System bus for expansions	EX101 expansion module 1 insert slot For plug-in B&R SYSTEM 2005 interface modules

Operating conditions

Degree of protection per EN 60529	IP65 (front)

Ambient conditions

Temperature
Operation	0 to 50°C
Storage	-20 to 60°C
Relative humidity
Operation	10 to 90%
Storage	5 to 95%

Mechanical properties

Dimensions
Width	205 mm
Height	220 mm
Depth	110.4 mm
Weight	1.95 kg

Materiálové číslo:

4P3040.01-490

Popis:

Power Panel PP41 5.7 inch QVGA monochrome LCD display, 8 soft keys and 32 function keys, system-compatible 2003 central processing unit, 700 kB SRAM, 1.4 MB FlashPROM, 1 PCMCIA slot, 1 RS232 interface, 1 CAN interface: electrically isolated, network-capable, 6 slots for adapter modules, 10 digital inputs 24 VDC, 8 digital outputs 24 VDC, 0.4 A, IP65 protection (front), 205 x 220 mm (W x H), 24 VDC. Order TB712 terminal blocks separately!

Povinné příslušenství

Accessories

0TB103.91	Connector 24 VDC - 3-pin, female - Cage clamp terminal block 3.31 mm²
0TB103.9	Connector 24 VDC - 3-pin, female - Screw clamp terminal block 3.31 mm²

Legend strips

4A0034.00-000	Panel A4 slide in legends for PP41 (4P3040.00-490); 5 sheets (for 10 devices), with CorelDraw file.

Terminal blocks

7TB712.91	Accessory terminal block, 12-pin, cage clamp terminal block 1.5 mm²
7TB712.9	Accessory terminal block, 12-pin, screw clamp terminal block 1.5 mm²

Volitelné příslušenství

Batteries

4A0006.00-000	Lithium battery, 3 V / 950 mAh, button cell
0AC201.91	Lithium batteries 4 pcs., 3 V / 950 mAh button cell

PCMCIA cards

0MC211.9	PC card memory card, 2 MB SRAM
0MC111.9-1	PC card memory card, 2 MB FlashPROM

Terminal blocks

7TB712@91-02
7TB712@90-02

Undefined

7NC161.7	2003 encoder module, input frequency 100 kHz, incremental or absolute, 32-bit, encoder power supply 5 VDC or 24 VDC, screw-in module
7IF361.70-1	2003 interface module, 1 RS485 interface, electrically isolated and network-capable, transfer protocol: PROFIBUS DP, screw-in module
7IF321.7	2003 interface module, 1 RS485/RS422 interface, electrically isolated, network-capable, screw-in module
7IF311.7	2003 interface module, 1 RS232 interface, screw-in module
7DO138.70	2003 digital output module, 8 outputs 24 VDC, 0.5 A, short-circuit proof, thermal overload protection, screw-in module, order 1x terminal block TB712 separately!
7DO135.70	2003 digital output module, 4 FET outputs 12 to 24 VDC, 0.1 A, screw-in module, order 1x terminal block TB712 separately!
7DI140.70	2003 digital input module, 10 inputs 24 VDC, sink, 2 inputs usable for event counter operation or direction-dependent position detection, input frequency 50 kHz, 4 usable inputs as high-speed inputs (e.g. gate, frequency measurement - only on the CPU interface), screw-in module, order 1x terminal block TB712 separately!
7DI138.70	2003 digital input module, 10 inputs 24 VDC, sink, 2 inputs usable for event counter operation, input frequency 20 kHz, screw-in module, order 1x terminal block TB712 separately!
7DI135.70	2003 digital input module, 4 inputs 24 VDC, sink, incremental encoder operation: 50 kHz, event counter operation: 100 kHz, 1 comparator output 24 VDC, screw-in module, order 1x terminal block TB712 separately!
7AT664.70	2003 analog input module, 4 inputs, thermocouples, -270 to +1372°C, screw-in module, order 1x terminal block TB712 separately!
7AT352.70	2003 analog input module, 2 inputs, PT100 (3-wire connections), -200 to +850°C, screw-in module, order 1x terminal block TB712 separately!
7AT324.70	2003 analog input module, 4 temperature inputs (2-wire connections), KTY10 -50 to +150°C, KTY84 -40 to +300°C, Pt100 -200 to +850°C, Pt1000 -200 to +850°C, screw-in module, order 1x terminal block TB712 separately!
7AO352.70	2003 analog output module 2 outputs, ±10 V or 0 to 20 mA, 12-bit, screw-in module, order 1x terminal block TB712 separately!
7AM351.70	2003 analog mixed module, 1 input, ±10 V, 16-bit, 1 output, ±10 V, 16-bit, screw-in module, order 1x terminal block TB712 separately!
7AI774.70	2003 analog input module, 4 inputs, 0 to 20 mA, 12-bit, screw-in module, order 1x terminal block TB712 separately!
7AI354.70	2003 analog input module, 4 inputs , ±10 V, 12-bit + sign, screw-in module, order 1x terminal block TB712 separately!
7AI351.70	2003 analog input module, 1 input, ±10 V or 0 to 20 mA 12-bit + sign, screw-in module, order 1x terminal block TB712 separately!
7AI294.7	2003 analog input module, 4 inputs, potentiometer displacement gauge, 13-bit, screw-in module
7AI261.7	2003 analog input module, 1 strain gauge input, 24-bit converter resolution, screw-in module
4IF370.7	Power Panel interface module 1 CAN interface Electrically isolated, network-capable Screw-in module
4EX101.00	Power Panel expansion for PP41 1 insert slot for insertable interface modules
3IF681.96	2005 interface module 1 RS232 interface 1 ETHERNET interface, designed as 10BASE-T twisted pair female RJ45 connector
3IF681.95	2005 interface module 1 RS232 interface 1 ETHERNET interface, with female 10BASE2 CHEAPERNET BNC connector
3IF672.9	2005 interface module, 1 RS232 interface, 2 CAN interfaces, CAN: Electrically isolated, network-capable, slot for CPU and interface modules
3IF671.9	2005 interface module, 1 RS232 interface, 1 RS485/RS422 interface, electrically isolated, network-capable, 1 CAN interface, electrically isolated, network-capable, slot for CPU and interface modules
3IF661.9	2005 interface module, 1 RS485 interface, electrically isolated and network-capable, transfer protocol: PROFIBUS DP, slot for CPU and interface modules
3IF622.9	2005 interface module, 1 RS232 interface, 2 RS485/RS422 interfaces, electrically isolated, network-capable, slot for CPU and interface modules
3IF621.9	2005 interface module, 1 RS485/RS422 interface, 1 CAN interface, both electrically isolated and network-capable, slot for CPU and interface modules
3IF613.9	2005 interface module, 3 RS232 interfaces, slot for CPU and interface modules

Dokumentace	Verze (datum)	Ke stažení
Datasheet 4P3040.01-490		PDF / 278 KB Pro stažení je potřeba se přihlásit.
Power Panel 15/21/35/41 User's Manual		PDF / 6 MB Pro stažení je potřeba se přihlásit.