General information
Encoder connection
| Electrical isolation | |
| Encoder - ACOPOSmulti | No |
| Module-side connection | 15-pin male DSUB connector |
| Status indicators | UP/DN LEDs |
| Encoder monitoring | Yes |
| Max. encoder cable length | 75 m |
Encoder inputs
| Sine/Cosine inputs | |
| Signal transmission | Differential signals, symmetrical |
| Signal frequency (-3 dB) | DC up to 300 kHz |
| Signal frequency (-5 dB) | DC up to 400 kHz |
| Common-mode voltage | Max. ±7 V |
| Terminating resistor | 120 Ω |
| Resolution | 12-bit |
| Quantity | 1 |
Encoder power supply
Reference input
| Signal transmission | Differential signal, symmetrical |
| Differential voltage for low | ≤-0.2 V |
| Differential voltage for high | ≥+0.2 V |
| Common-mode voltage | Max. ±7 V |
| Terminating resistor | 120 Ω |
Limit switch inputs
| Electrical isolation | |
| Input - ACOPOSmulti | No |
| Input - Input | No |
| Input voltage | |
| Minimum | -12 V |
| Nominal | +5 V |
| Maximum | +20 V |
| Switching threshold | |
| Low | <0.8 V |
| High | >2 V |
| Quantity | 2 |
| Circuit | Source |
| Input resistance | 1470 Ω |
| Switching delay | Max. 100 μs |
Ambient conditions
| Temperature | |
| Operation | |
| Nominal | 5 to 40°C |
| Maximum | 55°C |
| Storage | -25 to 55°C |
| Transport | -25 to 70°C |
| Relative humidity | |
| Operation | 5 to 85% |
| Storage | 5 to 95% |
| Transport | Max. 95% at 40°C |
物料号:
8BAC0124.000-1描述:
- SinCos interface for installation in ACOPOSmulti modules
- Evaluation of incremental encoders with sinusoidal output signal
- Encoder supply +5 V
- Connection for limit switches
- Connection for temperature sensor
可选附件
SinCos cables
| 8BCS0005.1111A-0 | ACOPOSmulti plug-in module, SinCos interface |
| 8BCS0007.1111A-0 | ACOPOSmulti plug-in module, SinCos interface |
| 8BCS0010.1111A-0 | ACOPOSmulti plug-in module, SinCos interface |
| 8BCS0015.1111A-0 | ACOPOSmulti plug-in module, SinCos interface |
| 8BCS0020.1111A-0 | ACOPOSmulti plug-in module, SinCos interface |
| 8BCS0025.1111A-0 | ACOPOSmulti plug-in module, SinCos interface |
| Automation Studio硬件升级 | 版本（日期） | 下载 |
|---|---|---|
| V3.0 HW Upgrade (8BAC0124.000-1) | EXE / 392 KB | |
| V4.0 HW Upgrade (8BAC0124.000-1) | EXE / 198 KB | |
| V6.0 HW Upgrade (8BAC0124.000-1) | EXE / 278 KB |
| E-CAD（电子或EPLAN模板） | 版本（日期） | 下载 |
|---|---|---|
| ACOPOSmulti EPLAN P8 from V2.4 | EXE / 81 MB |
| 文档 | 版本（日期） | 下载 |
|---|---|---|
| ACOPOSmulti User´s Manual | PDF / 308 MB | |
| Datasheet 8BAC0124.000-1 | PDF / 677 KB |