DWL@DWL10000878286
| Sürüm | Dil | İşletim sistemi | Tarih | Boyut | Tip | İndirme |
|---|---|---|---|---|---|---|
| 1.8.1.1 | * | 10/07/2026 | 1,010 KB | EXE | AS6_HW_X20IF2792.exe | |
| Açıklama |
V6.0 HW Upgrade (X20IF2792) Revision information X20IF2792 Version 1.8.1.1: ID: Firmware signature enables automatic verification of the authenticity on the target system The firmware package contains a digital signature that is automatically validated by Automation Runtime versions, which are supporting this feature. Thisensures that the installed firmware is unchanged and comes from a trusted source. Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.8.0.0: ID: 734535 Improvement of the electromagnetic compatibility Channel description changed: No Configurationdescription changed: No Firmware changed: Yes Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974_4.pci(5), 1\7974b0.can(130), 1\7974b1.can(130),1\7974b4.can(0) Version 1.7.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.6.0.0: ID: 718925 Resolve potential boot and warm restart issue In rare cases it could happen that the module is not reliably identified after a bootup or warm restart. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974_4.pci(4), 1\7974b0.can(130), 1\7974b1.can(130), 1\7974b4.can(0) Version 1.5.0.0: ID: 675925 Support for HWvariant 4 Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974_4.pci(3), 1\7974b0.can(130), 1\7974b1.can(130), 1\7974b4.can(0) Version 1.4.0.0: ID: 685500 Corrected handling of RTR objects Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974b0.can(130), 1\7974b1.can(130) Version 1.3.0.0: ID: 636280 Support for hardware variant 1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7974_0.pci(16), 1\7974_1.pci(3), 1\7974b0.can(122), 1\7974b1.can(122) Version 1.1.0.0: ID: 544315 Sporadic boot problem in combination with Compact-S and specific I/O configuration Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 584550 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames ifthe incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7974_0.pci(14), 1\7974b0.can(122) Version 1.0.8.0: ID:517345 Module documentation revised Data sheet V2.22 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7974_0.pci(10), 1\7974b0.can(122) Version 1.0.7.0: ID: 473700 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7974_0.pci(10), 1\7974b0.can(122) Version 1.0.6.0: ID: 460465 X2X data points completed and ModuleOK added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7974_0.pci(10), 1\7974b0.can(122) Version 1.0.5.2: ID: 291775 Compatibility toATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7974_0.pci(10), 1\7974b0.can(122) Version 1.0.4.0: ID: 229090 CAN transmitter blockade after cable un-/plugged corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7974_0.pci(6), 1\7974b0.can(122) Version 1.0.3.0: ID: 224465 CAN TransmitQueue Reset command corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7974_0.pci(6), 1\7974b0.can(120) Version 1.0.2.0: ID: 183715 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7974_0.pci(6), 1\7974b0.can(116) Version 1.0.1.0: ID: 164885 New Firmware V6 Error correction: problems when booting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7974_0.pci(6), 1\7974b0.can(116) |
|||||
