General information
Cable construction
Connector
Type | 13-pin female speedtec hybrid motor connector |
Mating cycles | <500 |
Contacts | 13 |
Additional connectors |
8-pin male Mini I/O encoder connector Mating cycles: <1500 Contacts: 8 Degree of protection per EN 60529: IP30 when connected |
Degree of protection per EN 60529 | IP66/67 when connected |
Electrical properties
Test voltage | |
Wire - Wire | 4 kV |
Wire - Shield | 4 kV |
Conductor resistance | |
Power lines | ≤13.3 Ω/km |
Supply lines | ≤26 Ω/km |
Signal line | 0.30 mm²: ≤68 Ω/km, 0.15 mm²: ≤140 Ω/km |
Insulation resistance | ≥200 MΩ*km |
Current-carrying capacity per DIN VDE 0298 part 4, table 11 | |
Wall mounting | 20.2 A |
Installed in conduit or cable duct | 17.8 A |
Installed in cable tray | 20.9 A |
Номер модель:
8ECH0008.1111A-0Описание:
- Can be used in cable drag chains
- Motor and encoder lines in one cable
- Assembled specifically for use with ACOPOS P3 servo drives and B&R servo motors with option "Single-cable solution (hybrid)"
- speedtec - Innovative connector system for secure connections
Дополнительная информация:
Due to their assembly, these cables can only be used with the following ACOPOS P3 servo drives:
- 8EI1X6xxSxx.xxxx-1
- 8EI2X2xxxxx.xxxx-1
- 8EI4X5xxxxx.xxxx-1
- 8EI8X8xxxxx.xxxx-1
Документация | Версия (Дата) | Загрузка |
---|---|---|
Datasheet 8ECH0008.1111A-0 | PDF / 272 кБ |
Сертификаты | Версия (Дата) | Загрузка |
---|---|---|
EU Declaration Servos ACOPOS P3 | PDF / 205 кБ | |
UK Declaration ACOPOSmicro | PDF / 109 кБ | |
UK Declaration Servos ACOPOS P3 | PDF / 126 кБ |