General information
Controller
| nvSRAM | |
| Size | 512 kB |
| Data retention | 20 years |
| Read/Write endurance | Min. 1,000,000 |
| Remanent variables in power failure mode | 256 kB (for e.g. Automation Runtime, see Automation Help) |
Interfaces
Electrical properties
| Power consumption | 2 W |
Operating conditions
| Pollution degree per EN 61131-2 | Pollution degree 2 |
Ambient conditions
| Temperature | |
| Operation | -20 to 55°C |
| Storage | -20 to 60°C |
| Transport | -20 to 60°C |
| Relative humidity | |
| Operation | 5 to 90%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Weight | 25 g |
Material number:
5ACCIF01.FPCC-000Description:
- 1x POWERLINK interface managing or controlled node
- 2x CAN bus master interfaces
- 1x X2X Link master interface
- 512 kB nvSRAM
- Compatible with APC2100/PPC2100 and APC2200/PPC2200
Interface option 5ACCIF01.FPCC-000 is equipped with a POWERLINK interface, 2 CAN bus master interfaces and an X2X Link master interface. In addition, 512 kB nvSRAM is installed.
Optional Accessories
Terminal blocks
| 0TB1210.3100 | Connector 300 VDC - 10-pin female - Cage clamp terminal block - Protected against vibration by the screw flange |
| Aktualizacja Automation Studio HW | Version (Date) | Download |
|---|---|---|
| V4.0 HW Upgrade (5ACCIF01.FPCC-000) | EXE / 645 KB | |
| V4.1 HW Upgrade (5ACCIF01.FPCC-000) | EXE / 905 KB | |
| V6.0 HW Upgrade (5ACCIF01.FPCC-000) | EXE / 920 KB |
| Aktualizacje Firmware | Version (Date) | Download |
|---|---|---|
| APC2100 Firmware Upgrade (MTCX, SDLT, SDL3T) | ZIP / 2 MB | |
| PPC2100 Firmware Upgrade (MTCX) | ZIP / 4 MB |
| Certyfikaty | Version (Date) | Download |
|---|---|---|
| CCS Type Approval Certificate - Automation PCs, Panel PCs and Panels | PDF / 471 KB | |
| DNV Type Approval Certificate - Automation PC 2100 | PDF / 218 KB |
| E-CAD (szablony Electro lub EPLAN) | Version (Date) | Download |
|---|---|---|
| APC EPLAN P8 from V2.4 | EXE / 99 MB |