DWL@DWL10000833706
| 仕様版 | 言語 | オペレーティングシステム | 日付 | サイズ | タイプ | ダウンロード |
|---|---|---|---|---|---|---|
| 1.7.0.1 | * | 2026/08/18 | 767 KB | EXE | AS6_HW_X20AI2622.exe | |
| 説明 |
V6.0 HW Upgrade (X20AI2622) Revision information X20AI2622 Version 1.7.0.1: ID: QCAS-3535 CVE-2025-43715: Installer is vulnerable to local privilege escalation The installation system NSIS used by B&Rcan allow local attackers to escalate their privileges. CVE-2025-43715, CVSS: 8.1 (High) CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.7.0.0: ID: TDYD-12003 Timing correction for HWVar11 Timing Correction: At HWVar11, a latency could occur in the transmission ofmeasured values, causing analog values to be output with a one-cycle delay onthe X2X bus. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(130), 1\7070_11.fw(133), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.6.0.0: ID: TDYD-9368 Support new HW variant 11 Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(130), 1\7070_11.fw(132), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.5.0.0: ID: 775255 Correction of PR 20044. For compatibility, the filter must be default OFF at startup using fieldbusses without configuration. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 777200 Fieldbus related correction of current mode 0..20mA incompatibility to previous HW variant 5 modules Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(130), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.3.0.0: ID: 753345 Support new HW variant 10 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(113), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.2.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.0.4.0: ID: 564385 Module documentation revised Data sheet V 3.04 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561),1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.3.0: ID: 447940 Documentation of filter function changed Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.2.1: ID: 422550 Documentation Correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.2.0: ID: 187085 Correction of wrong calculated values with 4-20mA setting Correction of wrong calculated values with4-20mA setting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.1.0: ID: 165120 New Firmware V560 HWVar. 1 Support of upper-/lowerlimit register and4-20 mA Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(560), 1\7070_2.fw(544), 1\7070_5.fw(800) |
|||||
| 仕様版 | 言語 | オペレーティングシステム | 日付 | サイズ | タイプ | ダウンロード |
| 1.7.0.0 | * | 2026/07/27 | 767 KB | EXE | AS6_HW_X20AI2622.exe | |
| 説明 |
V6.0 HW Upgrade (X20AI2622) Revision information X20AI2622 Version 1.7.0.0: ID: TDYD-12003 Timing correction for HWVar11 Timing Correction: At HWVar11, a latency could occur in the transmission ofmeasured values, causing analog values to be output with a one-cycle delay ontheX2X bus. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(130), 1\7070_11.fw(133), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.6.0.0: ID: TDYD-9368 Support new HW variant 11 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(130), 1\7070_11.fw(132), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.5.0.0: ID: 775255 Correction of PR 20044. For compatibility, the filter must be default OFF at startup using fieldbusses without configuration. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 777200 Fieldbus related correction of current mode 0..20mA incompatibility to previous HW variant 5 modules Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(130), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.3.0.0: ID: 753345 Support new HW variant 10 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(113), 1\7070_2.fw(545), 1\7070_5.fw(801) Version1.2.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.0.4.0: ID: 564385 Module documentation revised Data sheet V 3.04 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.3.0: ID: 447940 Documentation of filter function changed Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.2.1: ID: 422550 Documentation Correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.2.0: ID: 187085 Correction of wrong calculated values with 4-20mAsetting Correction of wrong calculated values with 4-20mA setting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.1.0: ID: 165120 New Firmware V560 HWVar. 1 Support of upper-/lowerlimit register and 4-20 mA Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(560), 1\7070_2.fw(544), 1\7070_5.fw(800) |
|||||
| 仕様版 | 言語 | オペレーティングシステム | 日付 | サイズ | タイプ | ダウンロード |
| 1.6.0.0 | * | 2025/09/24 | 1 MB | EXE | AS6_HW_X20AI2622.exe | |
| 説明 |
V6.0 HW Upgrade (X20AI2622) Revision information X20AI2622 Version 1.6.0.0: ID: TDYD-9368 Support new HW variant 11 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(130), 1\7070_11.fw(132), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.5.0.0: ID: 775255 Correction of PR 20044. For compatibility, the filter must be default OFF at startup using fieldbusses without configuration. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 777200 Fieldbus related correction of current mode 0..20mA incompatibility to previous HW variant 5 modules Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(130), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.3.0.0: ID: 753345 Support new HW variant 10 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7070_1.fw(561), 1\7070_10.fw(113), 1\7070_2.fw(545), 1\7070_5.fw(801) Version1.2.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.0.4.0: ID: 564385 Module documentation revised Data sheet V 3.04 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.3.0: ID: 447940 Documentation of filter function changed Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.2.1: ID: 422550 Documentation Correction Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.2.0: ID: 187085 Correction of wrong calculated values with 4-20mAsetting Correction of wrong calculated values with 4-20mA setting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(561), 1\7070_2.fw(545), 1\7070_5.fw(801) Version 1.0.1.0: ID: 165120 New Firmware V560 HWVar. 1 Support of upper-/lowerlimit register and 4-20 mA Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7070_1.fw(560), 1\7070_2.fw(544), 1\7070_5.fw(800) |
|||||
