General information
| Status display | Green LED (DC OK), threshold value Uout = 21.5 V |
| Insulation voltages | |
| Input - Output |
4 kV AC (type test) 2 kV AC (routine test) |
| Connection type | Screw terminal |
| Connection cross section | |
| Wire end sleeves | Flexible cables require wire end sleeves in order to fulfill EN 62368 / UL 60950 |
| Flexible | 0.2 to 2.5 mm² / 24 to 12 AWG |
| Inflexible | 0.2 to 2.5 mm² / 24 to 12 AWG |
| Wire stripping length | 6.5 mm (input/output) |
| Certifications | |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Evaluation ongoing |
| UL |
cULus E123528 Industrial control equipment |
Input
| Nominal input voltage | 100 to 240 VAC |
| Input voltage |
AC 85 to 264 V (wide range), 45 to 65 Hz DC 95 to 250 V |
| Input current |
Approx. 1.3 A (120 VAC) Approx. 0.8 A (230 VAC) |
| Inrush current limiting | <15 A (typical) |
| I2t | <1 A2s |
| Power failure bypass |
>20 ms (120 VAC) >100 ms (230 VAC) |
| Switch-on time | <0.5 s (typical) |
| Protective circuit | Transient surge protection with varistor |
| Internal fuse | 4 A slow-blow |
| Required line fuse for line protection |
6 A (characteristic B) 10 A (characteristic B) 16 A (characteristic B) |
Output
| Nominal voltage | 24 VDC ±1% |
| Output power | 100 W |
| Setting range for output voltage | 22.5 to 29.5 VDC (>24 VDC power constant) |
| Output current | |
| -25 to 40°C | 4.4 A |
| 40 to 55°C | 4.2 A |
| >55°C | Derating: 2.5% per °C |
| Current limiting | Max. 6.5 A |
| Control deviation |
<1% (static load change 10 to 90%) <2% (dynamic load change 10 to 90%) <0.1% (input voltage change ±10%) |
| Rise time | <0.5 s (UOUT (10 to 90%)) |
| Residual ripple | <25 mVSS (at nominal values) |
| Switching peaks | <25 mVSS (at nominal values) |
| Can be connected in parallel | Yes, to establish redundancy and increase capacity |
| Can be connected in series | Yes |
| Protection against internal overvoltages | Yes, limited to approximately 35 VDC |
| Protective functions | Output protected against continuous short circuit, open circuit and overload |
| Power back immunity | Max. 35 VDC |
| Output noise suppression | Device complies with EN 55011 (class B) |
Efficiency, reliability
| Efficiency | >88% (at 230 VAC and nominal values) |
| MTBF | >500,000 h, per IEC 61709 (SN 29500) |
| Power dissipation | |
| Rated load | Max. 13.2 W |
| No-load operation | Max. 0.7 W |
Operating conditions
| Installation elevation above sea level | |
| Maximum | 6000 m |
| Ventilation/Cooling | Normal convection, no fan required |
| Degree of protection per EN 60529 | IP20 |
| Protection class | II |
Ambient conditions
| Temperature | |
| Operation | -25 to 70°C (>55°C derating) |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | Max. 95%, non-condensing |
| Vibration | |
| Operation |
<15 Hz, amplitude ±2.5 mm, per IEC 60068-2-6 15 to 150 Hz, 2.3 g, 90 min |
| Shock | |
| Operation | 30 g in each direction, per IEC 60068-2-27 |
| Pollution degree | 2, per EN 50178 |
| Climate category | 3K3, per EN 60721 |
Mechanical properties
| Installation | Easy top-hat rail installation (DIN rail NS 35, EN 60715) or wall mounting |
| Dimensions | |
| Width | 90 mm |
| Height | 90 mm |
| Depth | 61 mm |
| Weight | 400 g |
Numero materiale:
0PS1042.2Descrizione:
- 100 to 240 VAC wide-range input
- Can be connected in parallel for increased capacity and redundancy
- Reliable operation due to long power failure bypass function under full load and high MTBF (>500,000 h)
- International certification package
- Wide temperature range from -25 to 70°C
- Extra flat design
- Easy DIN rail or wall mounting
| Certificati | Versione (data) | Download |
|---|---|---|
| EU Declaration Power supplies | PDF / 309 KB |
| Documentazione | Versione (data) | Download |
|---|---|---|
| Datasheet 0PS1042.2 | PDF / 501 KB | |
| Installation- / EMC-Guide | PDF / 20 MB |
| Informazioni generali | Versione (data) | Download |
|---|---|---|
| Power Supply Statement-Directive 2009/125/EC | PDF / 20 KB |
| M-CAD (Mechan. Template) | Versione (data) | Download |
|---|---|---|
| 3D file DXF/STEP 0PS1042.2 | ZIP / 1 MB |