DWL@DWL10000878223
| Versione | Lingua | Sistema operativo | Data | Taglia | Tipologia | Download |
|---|---|---|---|---|---|---|
| 1.8.0.1 | * | 07/10/2026 | 971 KB | EXE | AS6_HW_X20DO4332.exe | |
| Descrizione |
V6.0 HW Upgrade (X20DO4332) Revision information X20DO4332 Version 1.8.0.1: ID: Firmware signature enables automatic verification of the authenticity on the target system The firmware package contains a digital signature that is automatically validated by Automation Runtime versions, which are supporting this feature. Thisensures that the installed firmware is unchanged and comes from a trusted source. Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.8.0.0: ID: 775520 Support new HW variant 20 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7068_1.fw(560), 1\7068_10.fw(250), 1\7068_11.fw(250), 1\7068_20.fw(250), 1\7068_5.fw(816) Version 1.7.0.0: ID: 766265 Failure ModulOK If this module starting withrevision I0 is operated behind a bus controller, the network status fails every 10 s (for one X2X cycle). This failure has the following effects. - Local X2X bus: No effect - POWERLINK / Modbus TCP / PROFIBUS / CAN I/O: No effect - CANopen: "Object 0x30B2 Network status OK" fails sporadically. - OPC-UA: Flag ModuleOK of the respective X2X module may fail sporadically - EthernetIP / PROFINET / Sercos3 / EtherCAT: - No effect directly on the bus controller. - The network status is transferred as BYTE at the beginning of the cyclicdata of the respective X2X station (ModuleOK) and can be evaluated by the respective remote station (data point mapping and evaluation within the application). - Setpoint: 0xF5, in the event of error: 0xF1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7068_1.fw(560), 1\7068_10.fw(220), 1\7068_11.fw(220), 1\7068_5.fw(816) Version 1.6.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version1.5.0.0: ID: 676710 Adaptation framework for fast cycles for hardware variant 10 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 680565 Support hardware variant 11 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 683630 Module documentation revised Data sheet V 3.26.2 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7068_1.fw(560), 1\7068_10.fw(190), 1\7068_11.fw(190), 1\7068_5.fw(816) Version 1.3.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.2.0.0: ID: 646640 Performance optimization of X2X communication Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7068_1.fw(560), 1\7068_10.fw(150), 1\7068_5.fw(816) Version 1.1.0.0: ID: 626410 Support hardware variant 10 Channel description changed: No Configuration description changed:No Firmware changed: Yes ID: 626720 Module documentation revised Data sheet V 3.25 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7068_1.fw(560), 1\7068_10.fw(130), 1\7068_5.fw(816) Version 1.0.3.0: ID: 467190 Module documentation revised Data sheet V 3.22 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7068_1.fw(560), 1\7068_5.fw(816) Version 1.0.2.4: ID: 393490 Enhancement online-help files Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7068_1.fw(560), 1\7068_5.fw(816) Version 1.0.2.3: ID: 393060 Enhancements packed data point foroutputs Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7068_1.fw(560), 1\7068_5.fw(816) Version 1.0.2.2: ID: 366279 APROL entries revised Datapoint OSPValid corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7068_1.fw(560), 1\7068_5.fw(816) Version 1.0.2.0: ID: 317360 Additional function model "OSP mode" OSP - Output Set Predefined In OSP mode, the user defines the output behavior in case of connection loss between PLC and module. In doing so the power supply of the module must be assured. Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7068_1.fw(560), 1\7068_5.fw(816) Version 1.0.1.0: ID: 217465 Adaptation UART Re-Init Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7068_1.fw(560), 1\7068_5.fw(800) Version 1.0.0.1: ID: 211560 Display correction in IO-Map on SGC Targets Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7068_1.fw(530) |
|||||
