3AM055.6

Short description

I/O module	5 analog inputs, 3 analog outputs, potentiometer power supply

General information

Status indicators	Converter function, start pulse for software timing
Diagnostics
Module status	Yes, using software
Converter	Yes, using LED status indicator
Power consumption
24 VDC	5.5 W, including potentiometer power supply
5 VDC	1.5 W
Total	7.0 W
Electrical isolation
Channel - Channel	No
Channel - Potentiometer power supply	No
Channel - PLC	Yes
Potentiometer power supply - PLC	Yes
Certifications
CE	Yes
UL	cULus E115267 Industrial control equipment

Potentiometer power supply

Voltage	+10 V
Load	4 x 1 kΩ parallel, total max. 40 mA
Basic accuracy	±0.02% at 25°C
Short-circuit current	>100 mA

Analog inputs

Input	0 to 10 V
Input type	Differential input
Digital converter resolution	12-bit
Conversion time	<1 ms for inputs and outputs <1.5 ms with enabled averaging
Output format	INT
Input impedance in signal range	2 MΩ
Input protection	Protection against wiring with supply voltage
Operating modes	Cyclic measurement with optional averaging, direct software timing, software timing with time specification (2 - 65.535 ms)
Basic accuracy	±0.05% at 25°C

Analog outputs

Output	±10 V
Digital converter resolution	12-bit
Conversion time	<1 ms for inputs and outputs <1.5 ms with enabled averaging
Switch on/off behavior	Internal enable relay for startup and errors
Output protection	Short-circuit proof
Operating modes	Cyclic measurement with optional averaging, direct software timing, software timing with time specification (2 - 65.535 ms)
Basic accuracy	Max. ±0.3% at 25°C

Operating conditions

Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation	0 to 60°C
Storage	-25 to 70°C
Relative humidity
Operation	5 to 95%

Mechanical properties

Note	Order 1x terminal block TB170 separately.
Dimensions
Width	System 2005 single-width
Can be installed on
Base unit	Yes
Expansion unit	Yes

Référence produit:

3AM055.6

Description:

2005 analog mixed module, 5 inputs, 0 to 10 V, 12-bit, 3 outputs, ±10 V, 12-bit, 1 potentiometer voltage +10 V, 2x implemented, order 1x terminal block TB170 separately!

Accessoires optionnels

Terminal blocks

3TB170.9	2005 terminal block, 20-pin, screw clamp terminal block
3TB170.91	2005 terminal block, 20-pin, push-in terminal block

Automation Studio HW Upgrades	Version (date)	Téléchargement
V2.6 HW Upgrade (3AM055.6)		EXE / 398 Ko Identification pour téléchargement
V3.0 HW Upgrade (3AM055.6)		EXE / 398 Ko Identification pour téléchargement

Documentation	Version (date)	Téléchargement
Datasheet 3AM055.6		PDF / 524 Ko Identification pour téléchargement