Please choose country and language

Short description
I/O module 5 analog inputs, 3 analog outputs, potentiometer supply
General information
Status indicators Converter function, start pulse for software timing
Diagnostics
Module status Yes, with software status
converter Yes, with status LED
Power consumption
24 VDC 5.5 W, including potentiometer supply
5 VDC 1.5 W
Total 7.0 W
Electrical isolation
Channel - Channel No
Channel - Potentiometer power supply No
Channel - PLC Yes
Potentiometer power supply - PLC Yes
Certifications
CE Yes
EAC Yes
UL cULus E115267
Industrial control equipment
Potentiometer power supply
Voltage +10 V
Load 4x 1 kΩ parallel, total of max. 40 mA
Basic accuracy ±0.02% at 25°C
Short-circuit current > 100 mA
Analog inputs
Input 0 to 10 V
Input type Differential input
Digital converter resolution 12-bit
Conversion time <1 ms for inputs and outputs <1.5 ms with active averaging
Output format INT
Input impedance in signal range 2 MΩ
Input protection Protection against wiring with supply voltage
Operating modes Cyclic measurement with optional mean value, direct software timing, software timing with time definition (2 - 65,535 ms)
Basic accuracy ±0.05% at 25°C
Analog outputs
Output ±10 V
Digital converter resolution 12-bit
Conversion time <1 ms for inputs and outputs <1.5 ms with active averaging
Switch on/off behavior Internal enable relay for booting and errors
Output protection Short circuit protection
Operating modes Cyclic measurement with optional mean value, direct software timing, software timing with time definition (2 - 65,535 ms)
Basic accuracy Max. ±0.3% at 25°C
Operating conditions
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation 0 to 60°C
Storage -25 to 70°C
Relative humidity
Operation 5 to 95%
Mechanical properties
Note Order 1x TB170 terminal block separately
Dimensions
Width System 2005 single-width
Can be installed on
Base unit Yes
Expansion unit Yes
Material number:
3AM055.6
Description:
2005 analog mixed module, 5 inputs, 0 to 10 V, 12-bit, 3 outputs, ±10 V, 12-bit, 1 potentiometer voltage +10 V, 2 potentiometer voltage terminals, order 1x TB170 terminal block separately.
Optional Accessories
Terminal blocks
3TB170.9 2005 terminal block, 20-pin, screw clamps
3TB170.91 2005 terminal block, 20-pin, push-in terminal block
Automation Studio HW Upgrades Version (Date) Download
V2.6 HW Upgrade (3AM055.6) EXE / 398 KB
V3.0 HW Upgrade (3AM055.6) EXE / 398 KB
Documentation Version (Date) Download
Datasheet 3AM055.6 PDF / 431 KB

Please choose country and language

B&R Logo