Short description
Communication module 1x RS232/RS422/RS485, 1x CAN
General information
B&R ID code 0xB0BB
Status indicators
RS232 and CAN bus Data transfer per interface
RS485/RS422 No indicators
Diagnostics
Data transfer Yes, using LED status indicators
Electrical isolation
IF1 - IF2 Yes
IF1 - IF3 Yes
IF2 - IF3 Yes
PLC - IF1 No
PLC - IF2 Yes
PLC - IF3 Yes
Certifications
CE Yes
UKCA Yes
UL cULus E115267
Industrial control equipment
Interfaces
Interface IF1
Type RS232
Variant 9-pin DSUB connector (shared with IF2)
Input filter / Protective circuit Yes
Max. distance 15 m / 19,200 bit/s
Max. transfer rate 115.2 kbit/s
Network-capable No
FIFO buffer 16 bytes in the transmit and receive directions
Handshake lines RTS, CTS
Controller UART type 16C550 compatible
Data formats
Data bits 5 to 8
Parity Yes / No / Even / Odd
Stop bits 1 / 2
Interface IF2
Type RS485/RS422
Variant 9-pin DSUB connector (shared with IF1)
Max. distance 500 m
Max. transfer rate 115.2 kbit/s
Network-capable Yes
FIFO buffer 16 bytes in the transmit and receive directions
Terminating resistor Integrated in module
Controller UART type 16C550 compatible
Interface IF3
Fieldbus CAN bus
Type CAN bus
Variant 4-pin male multipoint connector
Controller SJA 1000
Max. distance 1000 m
Max. transfer rate 1 Mbit/s
Network-capable Yes
Bus terminating resistor Integrated in module, switchable
Max. transfer rate
Bus length ≤25 m 1 Mbit/s
Bus length ≤60 m 500 kbit/s
Bus length ≤200 m 250 kbit/s
Bus length ≤1000 m 50 kbit/s
Operating conditions
Degree of protection IP20
Ambient conditions
Temperature
Operation 0 to 50°C
Storage -25 to 70°C
Transport -25 to 70°C
Relative humidity
Operation 10 to 90%, non-condensing
Storage 10 to 90%, non-condensing
Transport 10 to 90%, non-condensing
Mechanical properties
Weight 57 g
Slot Slot in PP65
Torque for mounting screw Max. 0.6 Nm
Número de material:
4PP065.IF23-1
Descripción:
PP65 interface module, 1 RS232 interface, 1 RS485/RS422 interface, RS422 electrically isolated, RS485 electrically isolated and network-capable, RS232/RS422/RS485 designed in one connector, 1 CAN interface electrically isolated and network-capable, order terminal block 0TB704 separately!
Accesorios opcionales
Infrastructure components
0AC913.93 Bus adapter, CAN bus, 2 CAN bus interfaces, including 03 m attachment cable (TB704)
Terminal blocks
0TB704.9 Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²
0TB704.91 Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²
Actualizaciones de hardware de Automation Studio Versión (fecha) Descargar
V2.6 HW Upgrade (4PP065.IF23-1) EXE / 747 KB
V3.0 HW Upgrade (4PP065.IF23-1) EXE / 987 KB
V4.0 HW Upgrade (4PP065.IF23-1) EXE / 528 KB
Certificados Versión (fecha) Descargar
UL61010-1 Certificate of Compliance C70, T30 Series PDF / 336 KB
Documentación Versión (fecha) Descargar
Data sheet 4PP065.IF23-1 PDF / 347 KB
Power Panel 65 User's manual PDF / 5 MB
E-CAD (plantillas Electro o EPLAN) Versión (fecha) Descargar
Panel EPLAN P8 from V2.4 EXE / 67 MB
M-CAD (plantillas mecánicas) Versión (fecha) Descargar
3D file DXF/STEP 4PP065.IFxx-1 ZIP / 2 MB

Seleccione país e idioma

B&R Logo