X20cIF10X0

Short description
Communication module Controller redundancy link module
General information
B&R ID code 0xE239
Status indicators Module status, bus function
Diagnostics
Module status Yes, using LED status indicator and software
Bus function Yes, using LED status indicator and software
Data transfer Yes, using LED status indicator and software
Power consumption 1.93 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV Temperature: B (0 to 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
ABS Yes
BV EC33B
Temperature: 5 - 55°C
Vibration: 4 g
EMC: Bridge and open deck
EAC Yes
Interfaces
Fieldbus Redundancy link
Standard (compliance) IEEE Std 802.3, 2002 edition, clause 38
Variant 1x duplex LC
Transfer rate 1 Gbit/s
Transfer
Physical layer 1000BASE-SX
Wave length 850 nm
Cable fiber type Multimode fiber with 62.5/125 µm or 50/125 µm core diameter
LC connector on both sides
Line length
MMF 50/125 µm Min.: 2 m, max.: Up to 500 m
MMF 62.5/125 µm Min.: 2 m, max.: Up to 300 m
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation Up to 100%, condensing
Storage 5 to 85%, non-condensing
Transport 5 to 85%, non-condensing
Mechanical properties
Slot Left IF slot of X20cCP368x PLC
Número de material:
X20cIF10X0
Descripción:
  • CPU-CPU data synchronization module for redundant CPU systems

Interface module for redundant operation of controllers.

Actualizaciones de hardware de Automation Studio Versión (fecha) Descargar
V4.0 HW Upgrade (X20cIF10X0) EXE / 838 KB
Certificados Versión (fecha) Descargar
244665 CSA HazLoc CoC X20, X67 PDF / 158 KB
ABS Certificate of Product Design Assessment - X20 IO Series PDF / 2 MB
DNV Type Approval Certificate - X20 PDF / 194 KB
E115267 UL CoC X20 PDF / 1 MB
EU Declaration ATEX X20 PDF / 218 KB
EU Declaration of conformity PLC X20 PDF / 169 KB
FTZU 09 ATEX 0083X PDF / 771 KB
Lloyds Register PDF / 502 KB
RINA Type Approval Certificate - X20 / Power Panel T30 PDF / 1 MB
UK Declaration PLC X20 PDF / 151 KB
Documentación Versión (fecha) Descargar
Coated modules PDF / 62 KB
Data sheet X20(c)IF10X0 PDF / 2 MB
Installation- / EMC-Guide PDF / 20 MB
Redundancy for control systems PDF / 9 MB
X20 System User´s Manual PDF / 7 MB
E-CAD (plantillas Electro o EPLAN) Versión (fecha) Descargar
X20 EPLAN P8 from V2.4 EXE / 160 MB

Seleccione país e idioma

B&R Logo