Please choose country and language

General information
Cooling and mounting type Cold plate or feed-through mounting
Certifications
CE Yes
UL cULus E225616
Power conversion equipment
EAC Yes
KC Yes
DC bus connection
Voltage
Nominal 750 VDC
Continuous power depending on fuse
10 A 6 kW
20 A 12 kW
50 A 30 kW
Continuous current depending on fuse
10 A 8 Aeff
20 A 16 Aeff
50 A 40 Aeff
Reduction of continuous power at ambient temperatures starting at 40°C 1.25% per °Kelvin
Reduction of continuous power depending on installation elevation
Starting at 500 m above sea level 10% per 1000 m
Reduction of continuous power depending on cooling method No reduction
Peak current depending on fuse
10 A 20 A
20 A 40 A
50 A 100 A
Power dissipation with continuous power 200 W
Variant ACOPOSmulti backplane
24 VDC power supply
Input voltage 25 VDC ±1.6%
Continuous power depending on fuse
12 A 240 W
30 A 600 W
Max. power consumption 5 W
Reduction of continuous power at ambient temperatures starting at 40°C 1.25% per °Kelvin
Variant ACOPOSmulti backplane
DC bus cable outlet
Quantity 2
Fuse protection
Type 2x blow-out fuse Ø 14x51 mm
Tripping characteristic Ultra fast-acting
Rated current 10 / 20 / 50 A
Protective measures
Fuse-dependent overload protection
10 A No (overload indicated via LED, dry alarm contacts present)
20 A No (overload indicated via LED, dry alarm contacts present)
50 A No (overload indicated via LED, dry alarm contacts present)
Short circuit and ground fault protection Yes
Max. line length between two expansion modules 5 m
Variant
DC+, DC-, PE Male connector
Shield connection Yes
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeves 0.5 to 16 mm²
Approbation data
UL/C-UL-US 20 to 6 AWG
CSA 20 to 6 AWG
Terminal cable cross section dimension of shield connection 12 to 22 mm
24 VDC auxiliary supply cable outlet
Quantity 2
Output voltage
DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (DC bus voltage / 315)
DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
Fuse protection
Type Blow-out fuse Ø 10x38 mm
Tripping characteristic Fast-acting
Rated current 12 / 30 A
Protective measures
Overload protection Yes
Short-circuit proof Yes
Max. line length between two expansion modules 5 m
Variant
24 VDC, COM Male connector
Shield connection No
Terminal connection cross section
Flexible and fine-stranded wires
With wire end sleeves 0.25 to 6 mm²
Approbation data
UL/C-UL-US 22 to 10 AWG
CSA 22 to 10 AWG
Alarm contacts
Quantity 2
Type
Alarm contact 1 Normally closed contact
Alarm contact 2 N.O. contact
Electrical isolation
Alarm contact - ACOPOSmulti module Yes
Alarm contact - Alarm contact Yes
Nominal voltage 30 VDC
Maximum current 1 A
Switching delay 3 ms
Max. number of switching cycles 100,000
Protection
Overload-proof No
Short-circuit proof No
Operating conditions
Permissible mounting orientations
Hanging vertically Yes
Horizontal, face up Yes
Standing horizontally No
Installation elevation above sea level
Nominal 0 to 500 m
Maximum 4000 m
Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
Overvoltage category per EN 61800-5-1 III
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
Mechanical properties
Dimensions
Width 53 mm
Height 317 mm
Depth
Cold plate 212 mm
Feed-through mounting 209 mm
Weight Approx. 2.6 kg
Module width 1
Material number:
8BVE0500HC00.000-1
Description:
  • For distributing the DC bus power supply and 24 VDC auxiliary supply to multiple mounting plates
  • For setting up decentralized units in the ACOPOSmulti drive system
  • Output for overload protection
ACOPOSmulti expansion module 50 A, HV, cold plate or feed-through mounting
Mandatory Accessories
Fuse sets
8BXS000.0000-00 ACOPOSmulti fuse set: 2x fuse 14 x 51 mm, 50 A, high-speed
8BXS001.0000-00 ACOPOSmulti fuse set: 2x fuse 14x51 mm, 20 A, fast-acting
8BXS002.0000-00 ACOPOSmulti fuse set: 2x fuse 14 x 51 mm, 10 A, high-speed
8BXS003.0000-00 ACOPOSmulti fuse set: 1x fuse 10x38 mm, 30 A, fast-acting
8BXS004.0000-00 ACOPOSmulti fuse set: 1x fuse 10x38 mm, 12 A, fast-acting
8BXS005.0000-00 ACOPOSmulti fuse set: 2x fuse 14 x 51 mm, 25 A, high-speed
Terminal block sets
8BZVE050000.000-1A Screw clamp terminal block set for ACOPOSmulti 8BVE0500Hx00.000-1 modules: 2x 8TB3102.201C-11, 2x 8TB4103.203C-10, 1x 8TB2104.2010-00
Optional Accessories
8BVE / 8CVI connection cables
8CCH0002.11120-1 Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 2 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains
8CCH0005.11120-1 Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 5 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains
8CCH0007.11120-1 Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 7 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains
8CCH0009.11120-1 Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 9 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains
8CCH0010.11120-1 Hybrid cable for connecting 8BVE to 8CVI or 8DI, length 10 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 1x 15-pin female TYCO connector, 1x RJ45 connector, integrated shield fixing, can be used in cable drag chains
Expansion cables
8BCA0003.1111A-0 ACOPOSmulti expansion cable, length 3 m, 3x 1.5 mm², integrated shield plate, can be used in cable drag chains
8BCA0003.1312A-0 ACOPOSmulti expansion cable, length 3 m, 3x 4 mm², integrated shield plate, can be used in cable drag chains
8BCA0003.1513A-0 ACOPOSmulti expansion cable, length 3 m, 3x 10 mm², integrated shield plate, can be used in cable drag chains
8BCA0005.1111A-0 ACOPOSmulti expansion cable, length 5 m, 3x 1.5 mm², integrated shield plate, can be used in cable drag chains
8BCA0005.1312A-0 ACOPOSmulti expansion cable, length 5 m, 3x 4 mm², integrated shield plate, can be used in cable drag chains
8BCA0005.1513A-0 ACOPOSmulti expansion cable, length 5 m, 3x 10 mm², integrated shield plate, can be used in cable drag chains
8BCA01X5.1111A-0 ACOPOSmulti expansion cable, length 1.5 m, 3x 1.5 mm², integrated shield plate, can be used in cable drag chains
8BCA01X5.1312A-0 ACOPOSmulti expansion cable, length 1.5 m, 3x 4 mm², integrated shield plate, can be used in cable drag chains
8BCA01X5.1513A-0 ACOPOSmulti expansion cable, length 1.5 m, 3x 10 mm², integrated shield plate, can be used in cable drag chains
Fan modules
8BXF001.0000-00 ACOPOSmulti fan module, replacement fan for ACOPOSmulti modules (8BxP/8B0C/8BVI/8BVE/8B0K)
Shield component sets
8SCS000.0000-00 ACOPOSmulti shield component set: 1 shield plate 1x type 0, 1 hose clamp, B 9 mm, D 12-22 mm
8SCS009.0000-00 ACOPOSmulti shield component set: 1x ACOPOSmulti holding plate SK8-14, 1x shield connection clamp SK14
Terminal blocks
8TB2104.2010-00 4-pin screw clamp, single row, spacing: 5.08 mm, label 1: numbered serially
8TB3102.201C-11 2-pin screw clamp, single row, spacing: 7.62 mm, label 1: numbered serially, C keying: 10
8TB4103.203C-10 3-pin screw clamp, single row, spacing: 10.16 mm, label 3: +DC -DC PE, keying C: 010
Certificates Version (Date) Download
Declaration of conformity Servos PDF / 163 KB
E225616 UL Certificate of Compliance ACOPOSmulti PDF / 246 KB
Documentation Version (Date) Download
ACOPOSmulti User´s Manual PDF / 302 MB
Datasheet 8BVE0500HC00.000-1 PDF / 1 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
ACOPOSmulti EPLAN P8 from V2.4 EXE / 80 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D file STEP 8BVE0500HC00.000-1 ZIP / 100 KB

Please choose country and language

B&R Logo