General information
B&R ID code 0x1CE7
Status LED Yes (color / blink code)
24 VDC OUT power supply (DCOK LED) = Yes (color / blink code)
Status indicators Operating status and power supply
Power supply 24 VDC OUT: Yes, using LED and software
24 VDC X2X: Yes, using software

X2X Link Yes, using software
Overload Yes, using software (outputs)
Input capacitance
Module power supply 47 µF
I/O power supply 47 µF
Power consumption Max. 0.75 W
Electrical isolation
Digital outputs - 24 VDC X2X, OUT power supply No
X2X Link - 24 VDC X2X, OUT power supply Yes
X2X Link - Digital outputs Yes
Remote valve terminal connection for 25-pin DSUB multi-pin connection 24 valves
CE Yes
UL cULus E115267
Industrial control equipment
Bus connection 11-pin
GND pin 25
Power supply via bus connector
User interface
Variant 11-pin male multipoint connector
Type X2X Link slave
Digital outputs
Switching voltage 24 VDC ±25%
Total nominal current 2.4 A
Output circuit Source
Output protection Protected against short circuit, overload and overtemperature
Switching delay
0 → 1 Typ. 150 μs / max. 200 μs
1 → 0 Typ. 175 μs / max. 250 μs
Type High-side driver (source)
Max. output current 0.1 A
Max. switching frequency 100 Hz
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Degree of protection per EN 60529 IP20
Ambient conditions
Operation 0 to 55°C
Storage -20 to 70°C
Transport -20 to 70°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block 0TB1111.8110 separately.
Installation 25-pin DSUB, screw mounting, 4-40 UNC
Weight 56 g
Module dimensions including mounting plates 63 x 59 x 20 mm (H x W x D)
Material number:
Remote valve terminal connection, 24 digital outputs, 0.1 A, 24 VDC, for 25-pin DSUB multipin connector, GND pin 25, X2X Link, electrically isolated, IP20 protection, order 1x terminal block 0TB1111 separately!
Mandatory Accessories
Terminal blocks
0TB1111.8010 Accessory screw clamp terminal block, 11-pin, screw clamp terminal block 1.5 mm², protected against vibration by the screw flange
0TB1111.8110 Accessory terminal block, 11-pin, cage clamp, 1.5 mm², protected against vibration by the screw flange
Automation Studio HW Upgrades Version (Date) Download
V4.0 HW Upgrade (7XV124.50-11) EXE / 730 KB
Certificates Version (Date) Download
Safe cutoff of potential groups PDF / 0 B
Documentation Version (Date) Download
Compact I/O User's Manual PDF / 4 MB
XV Users's Manual PDF / 4 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D data DXF / STEP XV IP20 ZIP / 2 MB

Please choose country and language

B&R Logo