• Website
  • Model Number
  • Serial number
Logged in as UsernameLogout
B&R Logo
  • Specifications

  • Basic Information

  • Accessories

  • Downloads

  • Revisions

  • Serial number

    B&R ID code0x1CE7
    Status indicatorsOperating status and supply
    X2X LinkYes, using software
    OverloadYes, using software (outputs)
    Power consumptionMax. 0.75 W
    Input capacitance
    Module power supply47 µF
    I/O power supply47 µF
    Electrical isolation
    Digital outputs - 24 VDC X2X, OUT supplyNo
    X2X Link - 24 VDC X2X, OUT supplyYes
    X2X Link - Digital outputsYes
    Remote valve terminal connection for 25-pin DSUB multi-pin connection24 valves
    ULcULus E115267
    Industrial control equipment
    Bus connection11-pin
    GND pin25
    Power supplyBus connection
    User interface
    Design11-pin male multipoint connector
    TypeX2X Link slave
    Switching voltage24 VDC -25% / +25%
    Total nominal current2.4 A
    Output circuitSource
    Output protectionProtected against short circuit, overload and overtemperature
    Switching delay
    0 → 1Typ. 150 μs / max. 200 μs
    1 → 0Typ. 175 μs / max. 250 μs
    TypeHigh-side driver (source)
    Max. output current0.1 A
    Max. switching frequency100 Hz
    Mounting orientation
    Degree of protection per EN 60529IP20
    Operation0 to 55°C
    Storage-20 to 70°C
    Transport-20 to 70°C
    Relative humidity
    Operation5 to 95%, non-condensing
    Storage5 to 95%, non-condensing
    Transport5 to 95%, non-condensing
    NoteOrder 1x 0TB1111.8110 terminal block separately
    Installation25-pin DSUB, screw mounting, 4-40 UNC
    Weight56 g
    Module dimensions including mounting plates63 x 59 x 20 mm (H x W x D)


Product description:
Material number:
Remote valve terminal connection, 24 digital outputs, 0.1 A, 24 VDC, for 25-pin DSUB multi-pin connection, GND pin 25, X2X Link, electrically isolated, IP20 protection, order 1x 0TB1111 terminal block separately
Terminal blocks
  • 0TB1111.8010

    Accessory terminal block, 11-pin, screw clamp 1.5 mm², protected against vibration by the screw flange

  • 0TB1111.8110

    Accessory terminal block, 11-pin, cage clamp, 1.5 mm², protected against vibration by the screw flange

toggle all
This site uses cookies to enable a better customer experience. By continuing to browse the site you are agreeing to our use of cookies. Please find more information about cookies in our Privacy Policy.