Please choose country and language

Short description
I/O module 4 analog inputs in 2 groups, 4 analog outputs in 2 groups
General information
Status indicators Module configuration/converter function, start pulse for software timing, voltage/current input per group, voltage/current output per group
Diagnostics
Module status Yes, with software status
Module configuration Yes, using status LED and software status
converter Yes, with status LED
Power consumption
24 VDC 5.0 W
5 VDC 1.5 W
Total 6.5 W
Electrical isolation
Channel - Channel No
Channel - PLC Yes
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
EAC Yes
Analog inputs
Input type Differential input
Digital converter resolution 12-bit
Conversion time <1 ms for inputs and outputs <1.5 ms with active averaging
Output format INT
Input impedance in signal range 2 MΩ
Load 50 Ω
Input protection Protection against wiring with supply voltage
Operating modes Cyclic measurement with optional mean value, direct software timing, software timing with time definition (2 - 65,535 ms)
Basic accuracy ±0.1% at 25°C
Input
Voltage 0 to 10 V
Current 0 to 20 mA
Analog outputs
Digital converter resolution 12-bit
Conversion time <1 ms for inputs and outputs <1.5 ms with active averaging
Switch on/off behavior Internal enable relay for booting and errors
Output protection Short circuit protection
Operating modes Cyclic measurement with optional mean value, direct software timing, software timing with time definition (2 - 65,535 ms)
Output
Voltage ±10 V
Current 0 to 20 mA
Basic accuracy
Voltage ±0.3% at 25°C
Current ±0.15% at 25°C
Operating conditions
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation 0 to 60°C
Storage -25 to 70°C
Relative humidity
Operation 5 to 95%
Mechanical properties
Note Order 1x TB170 terminal block separately
Dimensions
Width System 2005 single-width
Can be installed on
Base unit Yes
Expansion unit Yes
Material number:
3AM374.6
Description:
2005 analog mixed module, 4 inputs, 0 to 10 V / 0 to 20 mA, 12-bit, 4 outputs, ±10 V / 0 to 20 mA, 12-bit, signals can be switched in groups of two, order 1x TB170 terminal block separately.
Mandatory Accessories
Terminal blocks
3TB170.9 2005 terminal block, 20-pin, screw clamps
3TB170.91 2005 terminal block, 20-pin, push-in terminal block
Automation Studio HW Upgrades Version (Date) Download
V2.6 HW Upgrade (3AM374.6) EXE / 399 KB
V3.0 HW Upgrade (3AM374.6) EXE / 399 KB
Documentation Version (Date) Download
Datasheet 3AM374.6 PDF / 452 KB

Please choose country and language

B&R Logo