Login

3AM374.6

Short description

I/O module	4 analog inputs in 2 groups, 4 analog outputs in 2 groups

General information

Status indicators	Module configuration/converter function, start pulse for software timing, voltage/current input per group, voltage/current output per group
Diagnostics
Module status	Yes, with software status
Module configuration	Yes, using status LED and software status
Converter	Yes, with status LED
Power consumption
24 VDC	5.0 W
5 VDC	1.5 W
Total	6.5 W
Electrical isolation
Channel - Channel	No
Channel - PLC	Yes
Certifications
CE
UL
EAC	Yes

Analog inputs

Input type	Differential input
Digital converter resolution	12-bit
Conversion time	<1 ms for inputs and outputs <1.5 ms with active averaging
Output format	INT
Input impedance in signal range	2 MΩ
Load	50 Ω
Input protection	Protection against wiring with supply voltage
Operating modes	Cyclic measurement with optional mean value, direct software timing, software timing with time definition (2 - 65,535 ms)
Basic accuracy	±0.1% at 25°C
Input
Voltage	0 to 10 V
Current	0 to 20 mA

Analog outputs

Digital converter resolution	12-bit
Conversion time	<1 ms for inputs and outputs <1.5 ms with active averaging
Switch on/off behavior	Internal enable relay for booting and errors
Output protection	Short circuit protection
Operating modes	Cyclic measurement with optional mean value, direct software timing, software timing with time definition (2 - 65,535 ms)
Output
Voltage	±10 V
Current	0 to 20 mA
Basic accuracy
Voltage	±0.3% at 25°C
Current	±0.15% at 25°C

Operating conditions

Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation	0 to 60°C
Storage	-25 to 70°C
Relative humidity
Operation	5 to 95%

Mechanical properties

Note	Order 1x TB170 terminal block separately
Dimensions
Width	System 2005 single-width
Can be installed on
Base unit	Yes
Expansion unit	Yes

Número do material:

3AM374.6

Descrição:

2005 analog mixed module, 4 inputs, 0 to 10 V / 0 to 20 mA, 12-bit, 4 outputs, ±10 V / 0 to 20 mA, 12-bit, signals can be switched in groups of two, order 1x TB170 terminal block separately.

Acessórios obrigatórios

Terminal blocks

3TB170.9	2005 terminal block, 20-pin, screw clamp terminal block
3TB170.91	2005 terminal block, 20-pin, push-in terminal block

Atualizações de HW Automation Studio	Version (Data)	Download
V2.6 HW Upgrade (3AM374.6)		EXE / 399 KB Login for download
V3.0 HW Upgrade (3AM374.6)		EXE / 399 KB Login for download

Documentação	Version (Data)	Download
Datasheet 3AM374.6		PDF / 547 KB Login for download