Short description
I/O module 16 digital inputs 24 VDC for 1-wire connections
General information
B&R ID code 0x292B
Status indicators I/O function per channel, operating state, module status
Diagnostics
Module run/error Yes, using LED status indicator and software
Power consumption
Bus 0.14 W
Internal I/O 1.4 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
UKCA Yes
EAC Yes
Digital inputs
Nominal voltage 24 VDC
Input characteristics per EN 61131-2 Type 1
Input voltage 24 VDC -15% / +20%
Input current at 24 VDC Typ. 2.68 mA
Input circuit Source
Input filter
Hardware ≤100 μs
Software Default 1 ms, configurable between 0 and 25 ms in 0.2 ms increments
Connection type 1-wire connections
Input resistance Typ. 8.9 kΩ
Simultaneity
With 24 V I/O power supply 100% (16 channels)
With 28.8 V I/O power supply 75% (12 channels)
Switching threshold
Low <5 VDC
High >15 VDC
Insulation voltage between channel and bus 500 Veff
Electrical properties
Electrical isolation Channel isolated from bus
Channel not isolated from channel
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB1F separately.
Order 1x bus module X20BM11 separately.
Pitch 12.5+0.2 mm
Materialenummer:
X20DIF372
Beskrivelse:
  • 16 digital inputs
  • Source circuit
  • 1-wire connections
  • Configurable software input filter for entire module

The module is equipped with 16 inputs for 1-wire connections. The module is designed for a source input circuit.

Obligatorisk tilbehør
Bus modules
X20BM11 X20 bus module, 24 VDC keyed, internal I/O power supply connected through
X20BM15 X20 bus module, with node number switch, 24 VDC keyed, internal I/O power supply connected through
Terminal blocks
X20TB1F X20 terminal block, 16-pin, 24 VDC keyed
Automation Studio HW opgraderinger Version (dato) Download
V4.0 HW Upgrade (X20DIF372) EXE / 1 MB
Certifikater Version (dato) Download
EU Declaration ATEX X20 PDF / 218 KB
EU Declaration of conformity PLC X20 PDF / 169 KB
UK Declaration PLC X20 PDF / 151 KB
Dokumentation Version (dato) Download
Data sheet X20DIF372 PDF / 680 KB
Installation- / EMC-Guide PDF / 20 MB
X20 System User´s Manual PDF / 7 MB
E-CAD (Elektro eller EPLAN skabeloner) Version (dato) Download
Makro-/Artikeldaten 4.0.3 (X20DIF372) EXE / 790 KB
X20 EPLAN P8 from V2.4 EXE / 160 MB

Vælg venligst land og sprog

B&R Logo