DWL@DWL10000791408
| Version | Sprog | Operativ system | Dato | Størrelse | Type | Download |
|---|---|---|---|---|---|---|
| 3.1.0.2 | * | 07/10/2026 | 476 KB | EXE | AS6_HW_X20SO2110.exe | |
| Beskrivelse |
V6.0 HW Upgrade (X20SO2110) Revision information X20SO2110 Version 3.1.0.2: ID: Firmware signature enables automatic verification of the authenticity on the target system The firmware package contains a digital signature that is automatically validated by Automation Runtime versions, which are supporting this feature. Thisensures that the installed firmware is unchanged and comes from a trusted source. Channel description changed: no Configuration description changed: yes Firmware changed: no Version 3.1.0.1: ID: FUVI-12963 SafetyPlus Public Release Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 10\7958_1.fw(652) Version 3.0.2.0: ID: FUVI-12000 Improved bootup behavior Fixed stability issues; faster bootup Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\7958_1.fw(652) Version 3.0.1.0: ID: FUVI-11882 10µs test pulse for HS/HS outputs corrected 10µs test pulse for HS/HS outputs corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\7958_1.fw(651) Version 2.3.0.1: ID: 783540 Configuration for Power Calculation available The Configuration for Power Calculation is now available in Automation Studio Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 10\7958_1.fw(573) Version 2.3.0.0: ID: 715260 Failsafe at every boot It could happen under rare conditions that the module is stuck in failsafe state atevery boot, generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 726625 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727170 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\7958_1.fw(573) Version 2.2.1.0: ID: 706355 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 706425 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\7958_1.fw(572) Version 2.2.0.1: ID: 688750 Loss of safety connection Loss of safety connection, even thoughthe parametrized "safe data duration"is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688885 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688945 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688960 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel descriptionchanged: No Configuration description changed: No Firmware changed:Yes Firmware: 10\7958_1.fw(571) Version 2.1.0.0: ID: 644165 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\7958_1.fw(570) Version 1.10.10.0: ID: 622780 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281), 4\7958_1.fw(300), 6\7958_1.fw(331) Version 1.10.9.1: ID: 643150 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculationof Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281), 4\7958_1.fw(300), 6\7958_1.fw(330) Version 1.10.9.0: ID: 618270 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281), 4\7958_1.fw(300), 6\7958_1.fw(330) Version 1.10.1.1: ID: 422790 Correction for FBK_Status_1 Correction for FBK_Status_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 532525 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532690 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552490 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552520 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281), 4\7958_1.fw(300), 6\7958_1.fw(325) Version 1.10.0.6: ID: 532680 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532685 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281), 4\7958_1.fw(300), 6\7958_1.fw(320) Version 1.10.0.2: ID: 507370 Added information about internal cycletime Added information about internal cycletime Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281), 4\7958_1.fw(300), 6\7958_1.fw(320) Version 1.10.0.1: ID: 473225 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 473235 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281), 4\7958_1.fw(300), 6\7958_1.fw(320) Version 1.9.0.0: ID: 375000 Pindata of outputs Mapping of pindata to outputs was corrected. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No ID: 413840 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 413940 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414220 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414340 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281), 4\7958_1.fw(300) Version 1.6.0.9: ID: 393905 Update Online Help Update Online Help V1.80 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281) Version1.6.0.8: ID: 388410 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281) Version 1.6.0.7: ID: 339260 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281) Version 1.6.0.5: ID: 335430 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335440 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281) Version 1.6.0.0: ID: 313995 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281) Version 1.4.1.8: ID: 303375 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281) Version 1.4.1.7: ID: 290275 Changed help to html format Changed help to html format Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281) Version 1.4.1.3: ID: 284625 Release für kompatibles Safety Release 1.5 ID 284600 Parameter for backwards compatibility in description file changed Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281) Version 1.4.1.1: ID: 180850 Release for Safety Release 1.5 Release for Safety Release 1.5 Channel description changed: No Configuration description changed: Yes Firmware changed: Yes Firmware:1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281) Version 1.4.0.1: ID#225425: Safety Release 1.4 - different levels for logger entires: "Info", "Warning" or "Error" (ARB3.05 required) - logger entries with level "Info" or "Warning" are sent by only 1 of the2safety processors to reduce the number of messages - X2X diagnostics data points (AR 3.08 required) Channel description changed: Yes Configuration description changed: No Firmware changed: Yes Version 1.2.0.3: ID#213410: changes in HWC fixed typos of safety parameters enabled for AR B2.96 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.2.0.0: ID#186435: reduced async communication at boot time parameters are stored locally and will only be transmitted in case of changes Channel description changed: No Configuration description changed: No Firmware changed: No ID#189430: automatic restart An automatic restart can be configured. This enables switching of the digital output without another edge of the release signal. Channel description changed: No Configuration description changed: No Firmware changed: No ID#193060: flashing ofSE-LEDs new states of SE-LEDs: single flash: safety firmware is still in state PreOp (waiting for start command from SL) double flash: safety firmware is in operational, but cyclic data connectionto SL is not valid Channel description changed: No Configuration description changed: No Firmware changed: Yes ID#201725: operation in cold environment problemswhen operating in cold environment (0 .. 10°C) solved (logger entries 99850 und 103946) Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.5.0: ID#191000: Problems with PhysicalStateChannel The availability of the PhysicalStateChannels is not configurable anymore. This avoids possible mapping problems Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.4.0: ID#183545: solved sporadic firmware update problems solved sporadic firmware update problems Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.3.0: ID#180215: boot problems at certain X2X cycle times failsafe state during boot when running at certain X2X cycle times (logger entries 119460 and 115364) Channel description changed: No Configuration description changed: No Firmware changed: No ID#182430: enhacements HWC restart inhibit state information can be mapped Aprol support Channel description changed: No Configuration description changed: No Firmware changed: No Channel description changed: No Configuration description changed: Yes Firmware changed: Yes Firmware: 1\7958_1.fw(262), 2\7958_1.fw(274), 3\7958_1.fw(281) Version 1.1.2.0: ID: 179300 first official release first official release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7958_1.fw(260) |
|||||
| Version | Sprog | Operativ system | Dato | Størrelse | Type | Download |
| 3.1.0.1 | * | 18/06/2026 | 472 KB | EXE | AS6_HW_X20SO2110.exe | |
| Beskrivelse |
V6.0 HW Upgrade (X20SO2110) Revision information X20SO2110 Version 3.1.0.1: ID: FUVI-12963 SafetyPlus Public Release Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 10\56708_1.fw(652) Version 3.0.2.0: ID: FUVI-12000 Improved bootup behavior Fixed stability issues; faster bootup Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\56708_1.fw(652) Version 3.0.0.0: ID: FUVI-11178 Control of the outputsreworked Control of the outputs reworked Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: FUVI-11177 New data sheet V3.0.0 New data sheet V3.0.0 Channel description changed: No Configuration description changed: No Firmware changed: No ID: FUVI-11176 First official release for Safety+ First official release for Safety+ Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(650) Version 2.3.0.1: ID: 783540 Configuration for Power Calculation available The Configuration for Power Calculation is now available in Automation Studio Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 10\56708_1.fw(573) Version 2.3.0.0: ID: 715260 Failsafe at every boot It could happen under rare conditions that the module is stuck in failsafe state at every boot, generating loggermessages: -1073565951/-1073561855 "internal cross communication error EPS"or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 726625 The power calculation ofthe modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727170 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(573) Version 2.2.1.0: ID: 706355 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 706425 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(572) Version 2.2.0.1: ID: 688750 Loss of safety connection Loss of safety connection, even though the parametrized "safe dataduration"is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688885 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688945 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688960 Improvement of the feedback diagnosis. Improvement of the feedbackdiagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\56708_1.fw(571) Version 2.1.0.0: ID: 644165 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\56708_1.fw(570) Version 1.10.10.0: ID: 622780 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(331) Version 1.10.9.1: ID: 643150 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(330) Version 1.10.9.0: ID: 618270 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(330) Version 1.10.1.1: ID: 422790 Correction for FBK_Status_1 Correction for FBK_Status_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 532525 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532690 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed:Yes Firmware changed: No ID: 552490 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552520 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(325) Version 1.10.0.6: ID: 532680 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532685 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.10.0.2: ID: 507370 Added information about internal cycletime Added information about internal cycletime Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.10.0.1: ID: 473225 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 473235 Support of release 1.10 including openSAFETY1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.9.0.1: ID: 413905 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414075 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed:No Configuration description changed: Yes Firmware changed: No ID: 414260 parameter max. Switching Frequency removed Parametermax. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414400 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300) Version 1.6.0.9: ID: 393950 first official release first official release Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 3\56708_1.fw(281) |
|||||
| Version | Sprog | Operativ system | Dato | Størrelse | Type | Download |
| 3.0.2.0 | * | 15/12/2025 | 472 KB | EXE | AS6_HW_X20SO2110.exe | |
| Beskrivelse |
V6.0 HW Upgrade (X20SO2110) Revision information X20SO2110 Version 3.0.2.0: ID: FUVI-12000 Improved bootup behavior Fixed stability issues; faster bootup Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\56708_1.fw(652) Version 3.0.0.0: ID: FUVI-11178 Control of the outputs reworked Control of the outputs reworked Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: FUVI-11177 New data sheet V3.0.0 New data sheet V3.0.0 Channel description changed: No Configuration description changed: No Firmware changed: No ID: FUVI-11176 First official release for Safety+ First official release for Safety+ Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(650) Version 2.3.0.1: ID: 783540 Configuration for Power Calculation available The Configuration for Power Calculation is now available in Automation Studio Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 10\56708_1.fw(573) Version 2.3.0.0: ID: 715260 Failsafe at every boot It could happen underrare conditions that the module is stuck in failsafe state at every boot, generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 726625 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727170 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(573) Version 2.2.1.0: ID: 706355 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 706425 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(572) Version 2.2.0.1: ID: 688750 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688885 Propagation delay statistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688945 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed:No Configuration description changed: No Firmware changed: Yes ID: 688960 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\56708_1.fw(571) Version 2.1.0.0: ID: 644165 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\56708_1.fw(570) Version 1.10.10.0: ID: 622780 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(331) Version 1.10.9.1: ID: 643150 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300),6\56708_1.fw(330) Version 1.10.9.0: ID: 618270 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(330) Version 1.10.1.1: ID: 422790 Correction for FBK_Status_1 Correction for FBK_Status_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 532525 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532690 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552490 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed:Yes ID: 552520 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(325) Version 1.10.0.6: ID: 532680 Addblackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532685 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.10.0.2: ID: 507370 Added information about internal cycletime Added information about internal cycletime Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.10.0.1: ID: 473225 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 473235 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.9.0.1: ID: 413905 SafeModuleID >300 Now it is possibleto set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414075 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414260 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414400 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300) Version 1.6.0.9: ID: 393950 first officialrelease first official release Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 3\56708_1.fw(281) |
|||||
| Version | Sprog | Operativ system | Dato | Størrelse | Type | Download |
| 3.0.1.0 | * | 09/10/2025 | 771 KB | EXE | AS6_HW_X20SO2110.exe | |
| Beskrivelse |
V6.0 HW Upgrade (X20SO2110) Revision information X20SO2110 Version 3.0.1.0: ID: FUVI-11882 10µs test pulse for HS/HS outputs corrected 10µs test pulse for HS/HS outputs corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\56712_1.fw(651) Version 3.0.0.0: ID:FUVI-11178 Control of the outputs reworked Control of the outputs reworked Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: FUVI-11177 New data sheet V3.0.0 New data sheet V3.0.0 Channel description changed: No Configuration description changed: No Firmware changed: No ID: FUVI-11176 First official release for Safety+ First official releasefor Safety+ Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56712_1.fw(650) Version 2.3.0.1: ID: 783530 Configuration for Power Calculation available The Configuration for Power Calculation is now available in Automation Studio Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 10\56712_1.fw(573) Version 2.3.0.0: ID: 719705 Failsafe at every boot It could happen under rare conditions that the module is stuck in failsafestate at every boot, generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 726590 The power calculation of the modules is supported The datafor the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727160 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56712_1.fw(573) Version 2.2.1.0: ID: 706305 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed:No Firmware changed: Yes ID: 706415 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56712_1.fw(572) Version 2.2.0.0: ID: 688695 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688875 Propagation delaystatistics The Propagation delay statistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688890 Increased delay of external feedback error detection Increased delay of external feedback error detection Channel description changed: No Configuration description changed:No Firmware changed: Yes ID: 688935 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688950 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\56712_1.fw(571) Version 2.1.0.0: ID: 644320 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications mustbe adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\56712_1.fw(570) Version 1.10.10.0: ID: 622770 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 5\56712_1.fw(331) Version 1.10.9.1: ID: 643445 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 5\56712_1.fw(330) Version 1.10.9.0: ID: 618195 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 5\56712_1.fw(330) Version 1.10.1.0: ID:552500 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552530 Loggerentry on negativ edgeof SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 577790 Improve the description section in the OSDD files Improve the descriptionsection in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 5\56712_1.fw(325) Version 1.10.0.6: ID: 543065 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 543070 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 5\56712_1.fw(320) Version 1.10.0.1: ID: 486415 first official release first official release Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 5\56712_1.fw(320) |
|||||
| Version | Sprog | Operativ system | Dato | Størrelse | Type | Download |
| 2.3.0.1 | * | 24/06/2024 | 2 MB | EXE | AS6_HW_X20SO2110.exe | |
| Beskrivelse |
V6.0 HW Upgrade (X20SO2110) Revision information X20SO2110 Version 2.3.0.1: ID: 783540 / Support ID: 400412437 Configuration for Power Calculation available The Configuration for Power Calculation isnow available in Automation Studio Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 10\56708_1.fw(573) Version 2.3.0.0: ID: 715260 Failsafeat every boot It could happen under rare conditions that the module is stuck in failsafe state at every boot, generating logger messages: -1073565951/-1073561855 "internal cross communication error EPS" or -1073565945/-1073561849 "Received crc data is not equal to sent crc data" Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 726625 The power calculation of the modules is supported The data for the power calculation of the data sheet is included in the HWX. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 727170 New data sheet V2.10 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(573) Version 2.2.1.0: ID: 706355 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 706425 New data sheet V2.08 For changes see chapter "Version history" in the data sheet. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 10\56708_1.fw(572) Version 2.2.0.1: ID: 688750 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688885 Propagation delay statistics The Propagation delaystatistics can now be read out. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688945 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 688960 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 10\56708_1.fw(571) Version 2.1.0.0: ID: 644165 major (even incompatible) changes for mapp Safety First upgrade for mapp Safety. ATTENTION: existing applications must be adapted - see chapter "Switching to mapp Safety" in help! Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 10\56708_1.fw(570) Version 1.10.10.0: ID: 622780 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 havebeen fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(331) Version 1.10.9.1: ID: 643150 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(330) Version 1.10.9.0: ID: 618270 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(330) Version 1.10.1.1: ID: 422790 / Support ID: 400159073, 400171675, 400201071 Correction for FBK_Status_1 Correction for FBK_Status_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 532525 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532690 Update ECAD data Update ECAD data Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552490 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552520 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(325) Version 1.10.0.6: ID: 532680 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532685 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.10.0.2: ID: 507370 Added information about internal cycletime Added information about internal cycletime Channel description changed:No Configuration description changed: Yes Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.10.0.1: ID: 473225 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 473235 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300), 6\56708_1.fw(320) Version 1.9.0.1: ID: 413905 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414075 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414260 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414400 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\56708_1.fw(281), 4\56708_1.fw(300) Version 1.6.0.9: ID: 393950 first official release first official release Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 3\56708_1.fw(281) |
|||||
