DWL@DWL10000649416
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 1.1.3.0 | * | 15.11.2022 | 6 MB | EXE | AS4_HW_X90CP174.48-S1.exe | |
| Popis |
V4.7 HW Upgrade (X90CP174.48-S1) Revision information X90CP174.48-S1 Version 1.1.3.0: ID: 761670 / Support ID: 400392864 X2X bus output cycle trigger error correction The X2X bus output cycle trigger was not started although it was configured. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 761730 / Support ID: 400249041 Register description of the sensor supply corrected Value "1" was stated as "not OK", which is incorrect Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.1.2.0: ID: 743050 / Support ID: 400368170 Broadcast channels missing in PLK interface Due to the change to Powerlink type 6, the broadcast channels have to be included. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.1.1.0: ID: 729155 Support for POWERLINK type 6 The module now supports POWERLINK type 6 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 729205 / Support ID: 400352024 Support for 6 A current on parallel channels When two 6 A channels are used in parallel mode, a total current of 12 A isnow possible. Attention: When using 4 A and 6 A channels in parallel, each channel can only supply 4 A. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.1.0.0: ID: 704465 / Support ID: 400335624 Disable AB encoder on channel 2 when ABR is configured on channel 1. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 717915 Enables second CPU core for I/O processing The I/O input processing can be assigned to the the second CPU core. This frees CPU processing power to be used by the application. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.0.4.0: ID: 694795 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 694815 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.0.3.0: ID: 590240 First Version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 2\60703_1.fp(52) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.1.2.0 | * | 03.12.2021 | 6 MB | EXE | AS4_HW_X90CP174.48-S1.exe | |
| Popis |
V4.7 HW Upgrade (X90CP174.48-S1) Revision information X90CP174.48-S1.48-S1 Version 1.1.2.0: ID: 743050 / Support ID: 400368170 Broadcast channels missing in PLK interface Due to the change to Powerlink type 6, the broadcast channels have to be included. Channel descriptionchanged: No Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.1.1.0: ID: 729155 Support for POWERLINK type 6 The module now supports POWERLINK type 6 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 729205 / Support ID: 400352024 Support for 6 A current on parallel channels When two 6 A channels are used in parallel mode, a total current of 12 A isnow possible. Attention: When using 4 A and 6 A channels in parallel, each channel can only supply 4 A. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.1.0.0: ID: 704465 / Support ID: 400335624 Disable AB encoder onchannel 2 when ABR is configured on channel 1. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 717915 Enables second CPU core for I/O processing The I/O input processing can be assigned to the the second CPU core. This frees CPU processing power to be used by the application. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.0.4.0: ID: 694795 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration descriptionchanged: No Firmware changed: No ID: 694815 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.0.3.0: ID: 590240 First Version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 2\60703_1.fp(52) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.1.1.0 | * | 16.09.2021 | 6 MB | EXE | AS4_HW_X90CP174.48-S1.exe | |
| Popis |
V4.7 HW Upgrade (X90CP174.48-S1) Revision information X90CP174.48-S1.48-S1 Version 1.1.1.0: ID: 729155 Support for POWERLINK type 6 The module now supports POWERLINK type 6 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 729205 / Support ID: 400352024 Support for 6 A current on parallel channels When two 6 A channels are used in parallel mode, a total current of 12 A isnow possible. Attention: When using 4 A and 6 A channels in parallel, each channel can only supply 4 A. Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.1.0.0: ID: 704465 / Support ID: 400335624 Disable AB encoder on channel 2 when ABR is configured on channel 1. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 717915 Enables second CPU core for I/O processing The I/O input processing can be assigned to the the second CPU core. This frees CPU processing power to be used by the application. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.0.4.0: ID: 694795 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 694815 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.0.3.0: ID: 590240 First Version Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 2\60703_1.fp(52) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.1.0.0 | * | 18.03.2021 | 5 MB | EXE | AS4_HW_X90CP174.48-S1.exe | |
| Popis |
V4.7 HW Upgrade (X90CP174.48-S1) Revision information X90CP174.48-S1.48-S1 Version 1.1.0.0: ID: 704465 / Support ID: 400335624 Disable AB encoder on channel 2 when ABR is configured on channel 1. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 717915 Enables second CPU core for I/O processing The I/O input processing can be assigned to the the second CPU core. This frees CPU processing power to be used by the application. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.0.4.0: ID: 694795 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 694815 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.0.3.0: ID: 590240 First Version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 2\60703_1.fp(52) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.0.4.0 | * | 11.09.2020 | 5 MB | EXE | AS4_HW_X90CP174.48-S1.exe | |
| Popis |
V4.7 HW Upgrade (X90CP174.48-S1) Revision information X90CP174.48-S1 Version 1.0.4.0: ID: 694795 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 694815 Support for automatic DNA configuration from AS4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 2\60703_1.fp(52) Version 1.0.3.0: ID: 590240 First Version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 2\60703_1.fp(52) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.0.3.0 | * | 07.07.2020 | 5 MB | EXE | AS4_HW_X90CP174.48-S1.exe | |
| Popis |
V4.7 HW Upgrade (X90CP174.48-S1) Revision information X90CP174.48-S1 Version 1.0.3.0: ID: 590240 First Version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 2\60703_1.fp(52) |
|||||
