DWL@DWL10000342064
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 1.15.0.0 | * | 20.07.2023 | 5 MB | EXE | AS4_HW_X20CP1382.exe | |
| Popis |
V4.1 HW Upgrade (X20CP1382) Revision information X20CP1382 Version 1.15.0.0: ID: 772655 / Support ID: 400400350, 400406359, 400407650 Wrong power consumption data corrected: calculated values in AS did notmatch to correct documentation Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(17), 1\55995a0.epl(129), 2\55995a0.epl(142) Version 1.14.0.0: ID: 736760 Fixed boot and warm restart issue In rare cases the X20CP13xx does not boot correctly after a restart Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(17), 1\55995a0.epl(129), 2\55995a0.epl(142) Version 1.13.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.12.0.0: ID: 704895 POWERLINK: Operating mode "Ethernet" If a POWERLINK interface was operated in operating mode "Ethernet" and connected to a POWERLINK network in this mode, the interface could fail. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(142) Version 1.11.1.0: ID: 664920 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 695230 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.11.0.0: ID: 673155 The insufficientsynchronization of the local inputs has been corrected. The local inputsare now delayed by 40ns. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.10.0.0: ID: 652290 POWERLINK: Possible failure of alreadyconfigured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652385 Error correction: DNA tree topologiesnot always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669005 Module documentation revised Data sheet V 1.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.8.0.0: ID: 635875 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 636535 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(138) Version 1.7.0.0: ID: 603210 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(14), 1\55995a0.epl(129), 2\55995a0.epl(136) Version 1.6.1.0: ID: 547425 Module documentation revised Datasheet V1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 568505 / Support ID: 400237284 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.6.0.0: ID: 542495 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.5.0.0: ID: 537140 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the modePRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 537160 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 537165 X20(c)CP13xx module documentation revised Data sheet V 1.15 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.3.2.0: ID: 495805 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed:No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.1.0: ID: 488420 / Support ID: 400191805 Correct picture added Channel description changed: No Configuration description changed: No Firmware changed: No ID: 490230 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.0.0: ID: 435455 / Support ID: 400156249 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 475525 Module documentation revised Data sheet V 1.04 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476105 Reduced CAN susceptibility to disturbances Channel descriptionchanged: No Configuration description changed: No Firmware changed:Yes ID: 479335 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.1: ID: 460505 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.0: ID: 455390 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455415 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455750 Update online help Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.1.1.0: ID: 438505 Documentation revised Channel description changed: No Configuration description changed: No Firmware changed: No ID: 443595 Support Bondingfeature Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443615 / Support ID: 400138730 POWERLINK V2: "Controlled node" mode In networks with heavy SoC jitter, the dropping out of an SoC sometimes caused a permanent freezing of the input data on the controlled node. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID:443635 / Support ID: 400150240 POWERLINK V2: "Controlled node" mode After a POWERLINK manager failed, the controlled node sometimes registered with an incorrect NMT status in the ident response. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(128), 2\55995a0.epl(128) Version 1.0.2.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.1.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.15: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.14: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 384850 RTC-drift corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123), 2\55995_0.pci(8), 2\55995a0.epl(123) Version 1.0.0.12: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123) Version 1.0.0.11: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.10: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware:1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.9: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.8: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.6: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3),1\55995a0.epl(123) Version 1.0.0.5: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.4: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.3: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.2: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.1: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.0: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.14.0.0 | * | 24.09.2021 | 5 MB | EXE | AS4_HW_X20CP1382.exe | |
| Popis |
V4.1 HW Upgrade (X20CP1382) Revision information X20CP1382 Version 1.14.0.0: ID: 736760 Fixed boot and warm restart issue In rare cases the X20CP13xx does not boot correctly after a restart Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(17), 1\55995a0.epl(129), 2\55995a0.epl(142) Version 1.13.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.12.0.0: ID: 704895 POWERLINK: Operating mode "Ethernet" If a POWERLINK interface was operated in operating mode "Ethernet" and connected to a POWERLINK network in this mode, the interface could fail. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(142) Version 1.11.1.0: ID: 664920 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 695230 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.11.0.0: ID: 673155 The insufficient synchronization of the local inputs has been corrected. The local inputs are now delayed by 40ns. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.10.0.0: ID: 652290 POWERLINK: Possible failure of already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652385 Error correction: DNA tree topologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669005 Module documentation revised Data sheet V 1.23 Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.8.0.0: ID: 635875 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 636535 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(138) Version 1.7.0.0: ID: 603210 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(14), 1\55995a0.epl(129), 2\55995a0.epl(136) Version 1.6.1.0: ID: 547425 Module documentation revised Data sheet V1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 568505 / Support ID: 400237284 hwx modifications Channel description changed: No Configurationdescription changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.6.0.0: ID: 542495 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.5.0.0: ID: 537140 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 537160 Correct setting of ETH-parameters when replacing the CPU Channel description changed:No Configuration description changed: Yes Firmware changed: No ID: 537165 X20(c)CP13xx module documentation revised Data sheetV 1.15 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.3.2.0: ID: 495805 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.1.0: ID: 488420 / Support ID: 400191805 Correct picture added Channel descriptionchanged: No Configuration description changed: No Firmware changed:No ID: 490230 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13),2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.0.0: ID: 435455 / Support ID: 400156249 SystemDesigner adjustment Channel description changed: No Configuration description changed:No Firmware changed: No ID: 475525 Module documentation revised Data sheet V 1.04 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476105 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479335 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.1: ID: 460505 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.0: ID: 455390 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455415 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455750 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.1.1.0: ID: 438505 Documentation revised Channel description changed: No Configuration description changed: No Firmware changed: No ID: 443595 Support Bonding feature Channel description changed: No Configuration description changed:No Firmware changed: Yes ID: 443615 / Support ID: 400138730 POWERLINK V2: "Controlled node" mode In networks with heavy SoC jitter,the dropping out of an SoC sometimes caused a permanent freezing of the inputdata on the controlled node. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443635/ Support ID: 400150240 POWERLINK V2: "Controlled node" mode After a POWERLINK manager failed, the controlled node sometimes registered with an incorrect NMT status in the ident response. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(128), 2\55995a0.epl(128) Version 1.0.2.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.1.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.15: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123),2\55995a0.epl(123) Version 1.0.0.14: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration descriptionchanged: Yes Firmware changed: Yes ID: 384850 RTC-drift corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123), 2\55995_0.pci(8), 2\55995a0.epl(123) Version 1.0.0.12: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123) Version 1.0.0.11: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.10: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.9: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.8: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.6: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.5: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.4: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.3: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.2: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.1: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.0: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration descriptionchanged: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.13.0.0 | * | 23.07.2021 | 4 MB | EXE | AS4_HW_X20CP1382.exe | |
| Popis |
V4.1 HW Upgrade (X20CP1382) Revision information X20CP1382 Version 1.13.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.12.0.0: ID: 704895 POWERLINK: Operating mode "Ethernet" If a POWERLINK interface was operated in operating mode "Ethernet" and connected to a POWERLINK network in this mode, the interface could fail. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(142) Version 1.11.1.0: ID: 664920 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 695230 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16),1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.11.0.0: ID: 673155 The insufficient synchronization of the local inputs has been corrected. The local inputs are now delayed by 40ns. Channel descriptionchanged: No Configuration description changed: No Firmware changed:Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.10.0.0: ID: 652290 POWERLINK:Possible failure of already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652385 Error correction: DNA tree topologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669005 Module documentation revised Data sheet V 1.23 Channel description changed: No Configuration descriptionchanged: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.8.0.0: ID: 635875 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 636535 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(138) Version 1.7.0.0: ID:603210 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are notphysically present in the network can cause no input data to be received fromall CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(14), 1\55995a0.epl(129), 2\55995a0.epl(136) Version 1.6.1.0: ID: 547425 Module documentation revised Data sheet V1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 568505 / Support ID: 400237284 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.6.0.0: ID: 542495 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.5.0.0: ID: 537140 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 537160 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed:Yes Firmware changed: No ID: 537165 X20(c)CP13xx module documentation revised Data sheet V 1.15 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.3.2.0: ID: 495805 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.1.0: ID: 488420 / Support ID: 400191805 Correct picture added Channel description changed: No Configuration descriptionchanged: No Firmware changed: No ID: 490230 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.0.0: ID: 435455 / Support ID: 400156249 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 475525 Module documentation revised Data sheet V 1.04 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476105 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479335 Data transfer errorson POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.1: ID: 460505 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.0: ID: 455390 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455415 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455750 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.1.1.0: ID: 438505 Documentation revised Channel description changed: No Configuration description changed: No Firmware changed: No ID:443595 Support Bonding feature Channel description changed: No Configuration description changed: No Firmware changed: Yes ID:443615 / Support ID: 400138730 POWERLINK V2: "Controlled node" mode In networks with heavy SoC jitter, the dropping out of an SoC sometimes caused a permanent freezing of the input data on the controlled node. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443635 / Support ID: 400150240 POWERLINK V2:"Controlled node" mode After a POWERLINK manager failed, the controlled node sometimes registered with an incorrect NMT status in the ident response. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(128), 2\55995a0.epl(128) Version 1.0.2.0: ID:355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.1.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.15: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.14: ID: 355320 Support X20CP1382 Channel description changed:Yes Configuration description changed: Yes Firmware changed: Yes ID: 384850 RTC-drift corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123), 2\55995_0.pci(8), 2\55995a0.epl(123) Version 1.0.0.12: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123) Version 1.0.0.11: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.10: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmwarechanged: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.9: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.8: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.6: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.5: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.4: ID:355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.3: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.2: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.1: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.0: ID: 355320 Support X20CP1382 First Version Channel description changed:Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.12.0.0 | * | 08.04.2021 | 4 MB | EXE | AS4_HW_X20CP1382.exe | |
| Popis |
V4.1 HW Upgrade (X20CP1382) Revision information X20CP1382 Version 1.12.0.0: ID: 704895 POWERLINK: Operating mode "Ethernet" If a POWERLINK interface was operated in operating mode "Ethernet" and connected to a POWERLINK network in this mode, the interface could fail. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(142) Version 1.11.1.0: ID: 664920 Support data point StorageWear, wear level of storage medium starting fromAR A4.90 Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 695230 Support for automatic DNA configuration from AS 4.9.1 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.11.0.0: ID: 673155 The insufficient synchronization of the local inputs has been corrected. The local inputs are now delayed by 40ns. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.10.0.0: ID: 652290 POWERLINK: Possible failure of already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652385 Error correction: DNA tree topologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669005 Module documentation revised Data sheet V 1.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.8.0.0: ID: 635875 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 636535 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(138) Version 1.7.0.0: ID: 603210 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the networkcan cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(14), 1\55995a0.epl(129), 2\55995a0.epl(136) Version 1.6.1.0: ID: 547425 Module documentation revised Data sheetV1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 568505 / Support ID: 400237284 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.6.0.0: ID: 542495 Configurable negative temperature displayrange Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.5.0.0: ID: 537140 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 537160 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 537165 X20(c)CP13xx module documentation revised Data sheet V 1.15 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.3.2.0: ID: 495805 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.1.0: ID: 488420 / Support ID: 400191805 Correct picture added Channel description changed: No Configuration description changed: No Firmware changed: No ID: 490230 Additional info data points FirmwareVersion andHardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.0.0: ID: 435455 / Support ID: 400156249 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 475525 Module documentation revised Data sheet V 1.04 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476105 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479335 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.1: ID: 460505 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.0: ID: 455390 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455415 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455750 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.1.1.0: ID: 438505 Documentation revised Channel description changed: No Configuration description changed: No Firmware changed: No ID: 443595 Support Bonding feature Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443615 / Support ID: 400138730 POWERLINK V2: "Controlled node" mode In networks with heavy SoC jitter, the dropping out of an SoC sometimes caused a permanent freezing of the input data on the controlled node. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443635 / Support ID: 400150240 POWERLINK V2: "Controlled node" mode Aftera POWERLINK manager failed, the controlled node sometimes registered with an incorrect NMT status in the ident response. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(128), 2\55995a0.epl(128) Version 1.0.2.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.1.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.15: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.14: ID: 355320 SupportX20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 384850 RTC-drift corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123), 2\55995_0.pci(8), 2\55995a0.epl(123) Version 1.0.0.12: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123) Version 1.0.0.11: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.10: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.9: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.8: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5),1\55995a0.epl(123) Version 1.0.0.6: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.5: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.4: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.3: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.2: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.1: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.0: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.11.0.0 | * | 28.01.2020 | 4 MB | EXE | AS4_HW_X20CP1382.exe | |
| Popis |
V4.1 HW Upgrade (X20CP1382) Revision information X20CP1382 Version 1.11.0.0: ID: 673155 The insufficient synchronization of thelocal inputs has been corrected. The local inputs are now delayed by 40ns. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(16), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.10.0.0: ID: 652290 POWERLINK: Possible failure of already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652385 Error correction: DNA tree topologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669005 Module documentation revised Data sheet V 1.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.8.0.0: ID: 635875 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 636535 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(138) Version 1.7.0.0: ID: 603210 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(14), 1\55995a0.epl(129), 2\55995a0.epl(136) Version 1.6.1.0: ID: 547425 Module documentation revised Data sheet V1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 568505 / Support ID: 400237284 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.6.0.0: ID: 542495 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.5.0.0: ID: 537140 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMTPRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 537160 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 537165 X20(c)CP13xx module documentation revised Data sheet V 1.15 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.3.2.0: ID: 495805 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.1.0: ID: 488420 / Support ID:400191805 Correct picture added Channel description changed: No Configuration description changed: No Firmware changed: No ID:490230 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.0.0: ID: 435455 / Support ID: 400156249 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 475525 Module documentation revised Data sheet V 1.04 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476105 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479335 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.1: ID: 460505 Problems withHW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.0: ID: 455390 IP packets with multicast addresses notreceived by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455415 ReducedX2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455750 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.1.1.0: ID: 438505 Documentation revised Channel description changed: No Configuration description changed: No Firmware changed: No ID: 443595 Support Bonding feature Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443615 / Support ID: 400138730 POWERLINK V2: "Controlled node" mode In networks with heavy SoC jitter, the dropping out of an SoC sometimes caused a permanent freezing of the input data on the controlled node. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443635 / Support ID: 400150240 POWERLINK V2: "Controlled node" mode After a POWERLINK manager failed, the controlled node sometimes registered with an incorrect NMT status in the ident response. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(128), 2\55995a0.epl(128) Version 1.0.2.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.1.0: ID: 355320 SupportX20CP1382 Channel description changed: No Configuration descriptionchanged: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.15: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.14: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 384850 RTC-drift corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123), 2\55995_0.pci(8), 2\55995a0.epl(123) Version 1.0.0.12: ID: 355320 Support X20CP1382 Channel description changed: No Configurationdescription changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123) Version 1.0.0.11: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(5),1\55995a0.epl(123) Version 1.0.0.10: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration descriptionchanged: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.9: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.8: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.6: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.5: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.4: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.3: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed:Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.2: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.1: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version1.0.0.0: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.10.0.0 | * | 11.12.2019 | 4 MB | EXE | AS4_HW_X20CP1382.exe | |
| Popis |
V4.1 HW Upgrade (X20CP1382) Revision information X20CP1382 Version 1.10.0.0: ID: 652290 POWERLINK: Possible failure of already configured CNs if new "chained stations" added during operation Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 652385 Error correction: DNA tree topologies not always started up correctly Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 669005 Module documentation revised Data sheet V 1.23 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(141) Version 1.8.0.0: ID: 635875 Moduledocumentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 636535 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(138) Version 1.7.0.0: ID: 603210 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(14), 1\55995a0.epl(129), 2\55995a0.epl(136) Version 1.6.1.0: ID: 547425 Module documentation revised Data sheet V1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 568505 / Support ID: 400237284 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.6.0.0: ID: 542495 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.5.0.0: ID: 537140 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 537160 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 537165 X20(c)CP13xx module documentation revised Datasheet V 1.15 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.3.2.0: ID: 495805 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.1.0: ID: 488420 / Support ID: 400191805 Correct picture added Channel description changed: No Configuration description changed: No Firmware changed: No ID: 490230 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configurationdescription changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.0.0: ID: 435455 / Support ID: 400156249 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 475525 Module documentation revised Data sheet V 1.04 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476105 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479335 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.1: ID: 460505 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.0: ID: 455390 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455415 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455750 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.1.1.0: ID: 438505 Documentationrevised Channel description changed: No Configuration description changed: No Firmware changed: No ID: 443595 Support Bonding feature Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443615 / Support ID: 400138730 POWERLINK V2: "Controlled node" mode In networks with heavy SoC jitter, the dropping out of an SoC sometimes caused a permanent freezing of theinput data on the controlled node. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443635 / Support ID: 400150240 POWERLINK V2: "Controlled node" mode After a POWERLINK manager failed, the controlled node sometimes registered with an incorrect NMT status in the ident response. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(128), 2\55995a0.epl(128) Version 1.0.2.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed:No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.1.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.15: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmwarechanged: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.14: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 384850 RTC-drift corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123), 2\55995_0.pci(8), 2\55995a0.epl(123) Version 1.0.0.12: ID: 355320 Support X20CP1382 Channel description changed:No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123) Version 1.0.0.11: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.10: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.9: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.8: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.6: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.5: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.4: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.3: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.2: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.1: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.0: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.8.0.0 | * | 21.05.2019 | 4 MB | EXE | AS4_HW_X20CP1382.exe | |
| Popis |
V4.1 HW Upgrade (X20CP1382) Revision information X20CP1382 Version 1.8.0.0: ID: 635875 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 636535 POWERLINK-Manager: With frequent failure of CN's, which are operated with the optimization "Chained station" it can be happen that failed CN's were not longer adressed by the manager. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(15), 1\55995a0.epl(129), 2\55995a0.epl(138) Version 1.7.0.0: ID: 603210 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no input data to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(14), 1\55995a0.epl(129), 2\55995a0.epl(136) Version 1.6.1.0: ID: 547425 Module documentation revised Data sheet V1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 568505 / Support ID: 400237284 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.6.0.0: ID: 542495 Configurable negative temperature display range Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.5.0.0: ID: 537140 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 537160 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 537165 X20(c)CP13xx module documentation revised Data sheet V 1.15 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.3.2.0: ID: 495805 Module documentation revised Data sheet V 1.10 Channel description changed:No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.1.0: ID: 488420 / Support ID: 400191805 Correct picture added Channel description changed: No Configuration description changed: No Firmware changed: No ID: 490230 Additional info data points FirmwareVersion and HardwareVariant Channeldescription changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.0.0: ID: 435455 / Support ID: 400156249 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 475525 Module documentation revised Data sheet V 1.04 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 476105 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479335 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.1: ID: 460505 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.0: ID: 455390 IP packets with multicast addresses not received byPOWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455415 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455750 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.1.1.0: ID: 438505 Documentation revised Channel description changed: No Configuration description changed: No Firmware changed: No ID: 443595 Support Bonding feature Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443615 / Support ID: 400138730 POWERLINK V2: "Controlled node" mode In networks with heavy SoC jitter, the dropping out of an SoC sometimes caused a permanent freezing of the input data on the controlled node. Channel description changed: No Configuration description changed:No Firmware changed: Yes ID: 443635 / Support ID: 400150240 POWERLINK V2: "Controlled node" mode After a POWERLINK manager failed, the controlled node sometimes registered with an incorrect NMT status in the ident response. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(128), 2\55995a0.epl(128) Version 1.0.2.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.1.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.15: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.14: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 384850 RTC-drift corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123), 2\55995_0.pci(8), 2\55995a0.epl(123) Version 1.0.0.12: ID: 355320 SupportX20CP1382 Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123) Version 1.0.0.11: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.10: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.9: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.8: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.6: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.5: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed:Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.4: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.3: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.2: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.1: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.0: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.7.0.0 | * | 31.08.2018 | 4 MB | EXE | AS4_HW_X20CP1382.exe | |
| Popis |
V4.1 HW Upgrade (X20CP1382) Revision information X20CP1382 Version 1.7.0.0: ID: 603210 / Support ID: 400250890 POWERLINK CNs with configuration "Optimization: Minimal latency": No input data received POWERLINK CNs with configuration "Optimization: Minimal latency" and "Chained station: On" that are not physically present in the network can cause no inputdata to be received from all CNs with setting "Optimization: Minimal latency". Channel description changed: No Configuration description changed:No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(14), 1\55995a0.epl(129), 2\55995a0.epl(136) Version 1.6.1.0: ID: 547425 Module documentation revised Data sheet V1.16 Channeldescription changed: No Configuration description changed: No Firmware changed: No ID: 568505 / Support ID: 400237284 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.6.0.0: ID: 542495 Configurable negative temperature display range Channeldescription changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.5.0.0: ID: 537140 / Support ID: 400204420 POWERLINK V2: no asynchronous frames in mode NMT PRE_OPERATIONAL_1 Because of a timing problem in the firmware it could happen that no asynchronous frames were sent in the mode PRE_OPERATIONAL_1 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 537160 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 537165 X20(c)CP13xx module documentation revised Data sheet V 1.15 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(131) Version 1.3.2.0: ID: 495805 Module documentation revised Data sheet V 1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.1.0: ID: 488420 / Support ID: 400191805 Correct picture added Channel description changed: No Configuration description changed: No Firmware changed: No ID: 490230 Additional info data points FirmwareVersion and HardwareVariant Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.3.0.0: ID: 435455 / Support ID: 400156249 SystemDesigner adjustment Channel description changed: No Configuration description changed: No Firmware changed: No ID: 475525 Module documentation revised Data sheet V 1.04 Channel description changed: No Configuration descriptionchanged: No Firmware changed: No ID: 476105 Reduced CAN susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 479335 Data transfer errors on POWERLINK-Interface Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(13), 2\55995_0.pci(13), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.1: ID: 460505 Problems with HW-upgrade file corrected Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.2.0.0: ID: 455390 IP packets with multicast addresses not received by POWERLINK interface (problem only occurs with Automation Runtime versions <A4.23) Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455415 Reduced X2X susceptibility to disturbances Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 455750 Update online help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(11), 1\55995a0.epl(129), 2\55995a0.epl(129) Version 1.1.1.0: ID: 438505 Documentation revised Channel description changed: No Configuration description changed: No Firmwarechanged: No ID: 443595 Support Bonding feature Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443615 / Support ID: 400138730 POWERLINK V2: "Controlled node" mode In networks with heavy SoC jitter, the dropping out of an SoC sometimes caused a permanent freezing of the input data on the controlled node. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 443635 / Support ID: 400150240 POWERLINK V2: "Controlled node" mode After a POWERLINK manager failed, the controlled node sometimes registered with an incorrect NMT status in the ident response. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(128), 2\55995a0.epl(128) Version 1.0.2.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(10), 1\55995a0.epl(123),2\55995a0.epl(123) Version 1.0.1.0: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.15: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 2\55995_0.pci(9), 1\55995a0.epl(123), 2\55995a0.epl(123) Version 1.0.0.14: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 384850 RTC-drift corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123), 2\55995_0.pci(8), 2\55995a0.epl(123) Version 1.0.0.12: ID: 355320 Support X20CP1382 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\55995_0.pci(7), 1\55995a0.epl(123) Version 1.0.0.11: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.10: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.9: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.8: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(5), 1\55995a0.epl(123) Version 1.0.0.6: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.5: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.4: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.3: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(3), 1\55995a0.epl(123) Version 1.0.0.2: ID: 355320 Support X20CP1382 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.1: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2), 1\55995a0.epl(123) Version 1.0.0.0: ID: 355320 Support X20CP1382 First Version Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\55995_0.pci(2) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.6.1.0 | * | 07.12.2017 | 4 MB | EXE | AS4_HW_X20CP1382.exe | |
| Popis |
V4.1 HW Upgrade (X20CP1382) Revision information X20cCP1301 Version 1.6.1.0: ID: 547425 Module documentation revised Data sheet V1.16 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 568505 / Support ID: 400237284 hwx modifications Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\60248_0.pci(13) Version 1.5.0.0: ID: 537190 Correct setting of ETH-parameters when replacing the CPU Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 537205 X20(c)CP13xx module documentation revised Data sheet V 1.15 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\60248_0.pci(13) Version1.3.2.0: ID: 490200 Support X20cCP1301 Channel descriptionchanged: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\60248_0.pci(13) |
|||||
