DWL@DWL10000300356
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 1.10.12.0 | * | 16.04.2021 | 2 MB | EXE | AS4_HW_X20SO6300.exe | |
| Popis |
V4.0 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 1.10.12.0: ID: 710655 Timing of module internal communication updated The timing of the module internal communication was updated. Sporadic errors 98818, 119317, 99348, 102914, 99350 no longer occur. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 710820 Limit values for the module cycle time adjusted The limit values for the calculation and monitoring of module cycle time and slot time adjusted. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 5\47125_1.fw(333) Version 1.10.11.0: ID: 692815 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692710 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692610 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 5\47125_1.fw(332) Version 1.10.10.1: ID: 669920 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(331) Version 1.10.10.0: ID: 622775 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(331) Version 1.10.9.1: ID: 643450 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.9.0: ID: 618260 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.1.0: ID: 532535 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552495 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552525 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(325) Version 1.10.0.6: ID: 532980 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532985 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414245 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID: 388455 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.5: ID: 335485 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.0: ID: 294215 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.10.11.0 | * | 17.09.2020 | 2 MB | EXE | AS4_HW_X20SO6300.exe | |
| Popis |
V4.0 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 1.10.11.0: ID: 692815 Improvement of the feedback diagnosis. Improvement of the feedback diagnosis of the output. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692710 Improvement of the internal voltage monitoring. Improvement of the internal voltage monitoring. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 692610 / Support ID: 400299371 Loss of safety connection Loss of safety connection, even though the parametrized "safe data duration" is longer than the network failure Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 5\47125_1.fw(332) Version 1.10.10.1: ID: 669920 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(331) Version 1.10.10.0: ID: 622775 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(331) Version 1.10.9.1: ID: 643450 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.9.0: ID: 618260 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.1.0: ID: 532535 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552495 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552525 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(325) Version 1.10.0.6: ID: 532980 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532985 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414245 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID: 388455 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.5: ID: 335485 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.0: ID: 294215 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.10.10.1 | * | 31.01.2020 | 2 MB | EXE | AS4_HW_X20SO6300.exe | |
| Popis |
V4.0 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 1.10.10.1: ID: 669920 Adaptations for Automation Studio 4.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(331) Version 1.10.10.0: ID: 622775 Sporadic errors 114982, 102914, 120065, 110385 Sporadic errors 114982, 102914, 120065, 110385 have been fixed Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(331) Version 1.10.9.1: ID: 643450 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.9.0: ID: 618260 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.1.0: ID: 532535 Improve the description section in the OSDD files Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552495 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552525 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(325) Version 1.10.0.6: ID: 532980 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532985 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414245 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID: 388455 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.5: ID: 335485 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.0: ID: 294215 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.10.9.1 | * | 16.05.2019 | 2 MB | EXE | AS4_HW_X20SO6300.exe | |
| Popis |
V4.0 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 1.10.9.1: ID: 643450 data sheet V1.141 See chapture "Version history" in the data sheet. i.a. calculation of Safety response time has been updated. Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.9.0: ID: 618260 logger entry 112174, 108078 Logger entry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.1.0: ID: 532535 Improve the description section in the OSDDfiles Improve the description section in the OSDD files Channel description changed: No Configuration description changed: Yes Firmwarechanged: No ID: 552495 Provide CRC of the Firmware ProvideCRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552525 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(325) Version 1.10.0.6: ID: 532980 Add blackout mode Add blackoutmode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532985 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10including openSAFETY 1.5 with easier parametrizationof timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300),5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configurationdescription changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status informationis now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414245 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID: 388455 The module also supports SafetyRelease 1.8 Starting withthis version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.5: ID:335485 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel descriptionchanged: No Configuration description changed: No Firmware changed:No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware:3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support ofAutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.0: ID:294215 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.10.9.0 | * | 08.11.2018 | 2 MB | EXE | AS4_HW_X20SO6300.exe | |
| Popis |
V4.0 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 1.10.9.0: ID: 618260 logger entry 112174, 108078 Loggerentry 112174, 108078 could happen sporadically with large projects. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(330) Version 1.10.1.0: ID: 532535 Improve the description section in the OSDD files Improve the description section in theOSDD files Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 552495 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552525 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(325) Version 1.10.0.6: ID: 532980 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532985 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed:No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Addedcoated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel descriptionchanged: No Configuration description changed: No Firmware changed:No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414245 parameter max. Switching Frequency removed Parameter max.Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID: 388455 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.5: ID: 335485 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.0: ID: 294215 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.10.1.0 | * | 05.03.2018 | 2 MB | EXE | AS4_HW_X20SO6300.exe | |
| Popis |
V4.0 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 1.10.1.0: ID: 532535 Improve the description section in the OSDD files Improve the description section in the OSDD files Channeldescription changed: No Configuration description changed: Yes Firmware changed: No ID: 552495 Provide CRC of the Firmware Provide CRC of the Firmware Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 552525 Loggerentry on negativ edge of SafeModuleOK If a negativ edge on SafeModuleOK is detected, a logger entry will be generated Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(325) Version 1.10.0.6: ID: 532980 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 532985 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, likedescribed in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414245 parameter max. Switching Frequency removed Parameter max. Switching Frequency hasno meaning any more. Channel description changed: Yes Configurationdescription changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID: 388455 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 3\47125_1.fw(295) Version 1.6.0.5: ID: 335485 The module also supports SafetyRelease 1.7 Starting withthis version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption ofmodule configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmwarechanged: No Firmware: 3\47125_1.fw(295) Version 1.5.0.0: ID: 294215 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.10.0.6 | * | 04.10.2017 | 2 MB | EXE | AS4_HW_X20SO6300.exe | |
| Popis |
V4.0 HW Upgrade (X20SO6300) Revision information X20SO6300 Version 1.10.0.6: ID: 532980 Add blackout mode Add blackout mode Channel description changed: No Configuration description changed:Yes Firmware changed: No ID: 532985 New channel for ConnectionValid New channel for ConnectionValid Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.1: ID: 488640 Added coated type of module in help Added coated type of module in help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.10.0.0: ID: 470630 changed manual verion to 1.100 changed manual verion to 1.100 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 470635 Support of release 1.10 including openSAFETY 1.5 Support of release 1.10 including openSAFETY 1.5 with easier parametrization of timing parameters Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300), 5\47125_1.fw(320) Version 1.9.0.0: ID: 413865 SafeModuleID >300 Now it is possible to set SafeModuleID greater than 300, like described in the AS-Help. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 413975 Channel-Status-Info ON The default value of the Channel-Status information is now ON. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 414245 parameter max. Switching Frequency removed Parameter max. Switching Frequency has no meaning any more. Channel description changed: Yes Configuration description changed: No Firmware changed: Yes ID: 414360 Update Online Help Update Online Help V1.90 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295), 4\47125_1.fw(300) Version 1.6.0.8: ID:388455 The module also supports SafetyRelease 1.8 Starting with this version, the module also supports SafetyRelease 1.8 Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Firmware: 3\47125_1.fw(295) Version 1.6.0.7: ID: 339285 internal Adjustments internal Adjustments Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.5: ID: 335485 The module also supports SafetyRelease 1.7 Starting with this version, the module also supports SafetyRelease 1.7 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 335490 / Support ID: 400083263 unlock of SafeModule IDs > 300 SafeModule IDs up to 1023 are now unlocked Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.6.0.0: ID: 314035 Adaption of module configuration file release 1.6 Adaption of module configuration file release 1.6 Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.4: ID: 303400 Support of AutomationStudio 4.0 Support of AutomationStudio 4.0 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) Version 1.5.0.0: ID: 294215 First Official Release First Official Release Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 3\47125_1.fw(295) |
|||||
