DWL@DWL10000314320
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 2.0.1.0 | * | 15.06.2023 | 525 KB | EXE | AS4_HW_5AP933.185B-00.exe | |
| Popis |
V4.0 HW Upgrade (5AP933.185B-00) Revision information 5AP933.185B-00 Version 2.0.1.0: ID: 770695 Configuration changes in case that the Panel is used as Panel PC in Terminal mode. Channel description changed: No Configuration description changed: Yes Firmware changed:No Version 2.0.0.0: ID: 666685 Extensions Hypervisor from AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP9x3 are recommended, mixedoperation of the current and older HWX upgrades is not recommended: APC910system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP9x3 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 666690 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677770 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81.In case of a missconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.8.0.0: ID: 637875 Preparation to support the Panel PC 2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.7.0.0: ID: 569185 Preparation to support the Panel PC 3100and SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.5.0.0: ID: 554695 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-xx at the usage as display unit of a Panel PCis activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 554700 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.4.1.0: ID: 374245 / Support ID: 400142426, 400152825 Correction in the hardware descrption file The upload of the hardware works within the ARwin from versions: -T4.06, -H4.09, -M4.10, -G4.25 Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.4.0.0: ID: 406010 Support of customized display units From Automation Runtime C4.10 on it is possible to runAutomation Studio projects with Panel PC 2100 and customized display unit in a Panel PC 2100 with the corresponding standard display unit. Channel description changed: No Configuration description changed: Yes Firmwarechanged: No ID: 407130 Revised terminal configuration The parameter "Use Type" (currently Use Types of the module: in Panel PC 900, Panel PC 2100 or Automation Panel) has to be set depending on the usage of the display unit in a terminal configuration. In follow it is possible to makethe correct terminal settings. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 407145 Support of customized display units From Automation Runtime C4.10 on it is possible to run Automation Studio projects with Panel PC 2100 and customized display unit in a Panel PC 2100 with the corresponding standard display unit. Channel description changed: No Configuration description changed:Yes Firmware changed: No Version 1.3.5.0: ID: 402955 ARemb is booting up cyclically at Panel PC 900 With upgrade version V1.3.0.0 ARemb is booting up cyclically at Panel PC 900. This problem is solved. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 392665 Support for Smart Display Link 3 (SDL3) To configure a SDL3 Panel following upgrades have to be installed, too: SDL3 Transmitter: 5AC901.LSD3-00 V1.0.0.0 SDL3 Receiver: 5DLSD3.1001-00 V1.0.0.0 APC910 system unit: 5PC910.SX0x-00 V1.3.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 399370 Preparation to support new targets Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.2.0.0: ID: 392665 Support for Smart Display Link 3 (SDL3) To configure a SDL3 Panel following upgrades have to be installed, too: SDL3 Transmitter: 5AC901.LSD3-00 V1.0.0.0 SDL3 Receiver: 5DLSDL.1001-00 V1.0.0.0 APC910 system unit: 5PC910.SX0x-00 V1.3.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.1.0: ID: 385450 Graphics driver issue with the Panel PC 900 as a windows terminal server The use of a Panel PC 900 as a Windows terminal server has caused problems with the graphics driver. With an additional parameter in the hardware description file this problem is solved. Channel description changed: No Configuration description changed:No Firmware changed: No ID: 385485 Preparation to support new targets Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 373110 Support for 5AP923.1215-00 The display unit is supported with Automation Studio V4.0.17.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 2.0.0.0 | * | 08.04.2020 | 205 KB | EXE | AS4_HW_5AP933.185B-00.exe | |
| Popis |
V4.0 HW Upgrade (5AP933.185B-00) Revision information 5AP923.1215-00 Version 2.0.0.0: ID: 666685 Extensions Hypervisor from AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used for allcomponents (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP9x3 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP9x3 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 666690 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677770 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Panel PC is activfrom Automation Runtime version C4.34. The supervision at the usage as display unit ofa Automation PC is activ from Automation Runtime version A4.81. In case of a missconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.8.0.0: ID: 637875 Preparation to support the Panel PC 2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.7.0.0: ID: 569185 Preparation to support the Panel PC 3100 and SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.5.0.0: ID: 554695 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-xx at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 554700 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.4.1.0: ID: 374245 / Support ID: 400142426, 400152825 Correction in the hardware descrption file The upload of the hardware works within the ARwin from versions: -T4.06, -H4.09, -M4.10, -G4.25 Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.4.0.0: ID: 406010 Support of customized display units From Automation Runtime C4.10 on it is possible to run Automation Studio projects with Panel PC 2100 and customized display unit in a Panel PC 2100 with the corresponding standard display unit. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 407130 Revised terminal configuration The parameter "Use Type" (currently Use Types of the module: in Panel PC 900, Panel PC 2100 or Automation Panel) has to be set depending on the usage of the display unit in a terminal configuration. In follow it is possible to makethe correctterminal settings. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 407145 Support of customized display units From Automation Runtime C4.10 on it is possible to run Automation Studio projects with Panel PC 2100 and customized display unit in a Panel PC 2100 with the corresponding standard display unit. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.5.0: ID: 402955 ARemb is booting up cyclically at Panel PC 900 With upgrade version V1.3.0.0ARemb is booting up cyclically at Panel PC 900. This problem is solved. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 392665 Support for Smart Display Link 3 (SDL3) To configure a SDL3 Panel following upgrades have to be installed, too: SDL3 Transmitter: 5AC901.LSD3-00 V1.0.0.0 SDL3 Receiver: 5DLSD3.1001-00 V1.0.0.0 APC910 system unit: 5PC910.SX0x-00 V1.3.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed:No ID: 399370 Preparation to support new targets Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.2.0.0: ID: 392665 Support for Smart Display Link 3 (SDL3) To configure a SDL3 Panel following upgrades have to be installed, too: SDL3 Transmitter: 5AC901.LSD3-00 V1.0.0.0 SDL3 Receiver: 5DLSDL.1001-00 V1.0.0.0 APC910 system unit: 5PC910.SX0x-00 V1.3.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.1.0: ID: 385450 Graphics driver issue with the Panel PC 900 as a windows terminal server The use of a Panel PC 900 as a Windows terminal server has caused problems with the graphics driver. With an additional parameter in the hardware description file this problem is solved. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 385485 Preparation to support new targets Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 373110 Support for 5AP923.1215-00 The display unit is supported with Automation Studio V4.0.17.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.8.0.0 | * | 16.07.2019 | 204 KB | EXE | AS4_HW_5AP933.185B-00.exe | |
| Popis |
V4.0 HW Upgrade (5AP933.185B-00) Revision information 5AP923.1215-00 Version 1.8.0.0: ID: 637875 Preparation to support the Panel PC 2200 Channel description changed: No Configuration descriptionchanged: Yes Firmware changed: No Version 1.7.0.0: ID: 569185 Preparation to support the Panel PC 3100 and SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.5.0.0: ID: 554695 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-xx at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 554700 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.4.1.0: ID: 374245 / Support ID: 400142426, 400152825 Correction in the hardware descrption file The upload of the hardware works within the ARwin from versions: -T4.06, -H4.09, -M4.10, -G4.25 Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.4.0.0: ID: 406010 Support of customized display units From Automation Runtime C4.10 on it is possible to run Automation Studio projectswith Panel PC 2100 and customized display unit in a Panel PC 2100 with the corresponding standard display unit. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 407130 Revised terminal configuration The parameter "Use Type" (currently Use Types of the module: in Panel PC 900, Panel PC 2100 or Automation Panel) has to be set depending on the usage of the display unit in a terminal configuration. In follow it is possible to makethe correct terminal settings. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 407145 Support of customized display units From Automation Runtime C4.10 on it is possible to run Automation Studio projects with Panel PC 2100 and customized display unit in a Panel PC 2100 with the corresponding standard display unit. Channel description changed: No Configuration description changed: Yes Firmware changed:No Version 1.3.5.0: ID: 402955 ARemb is booting up cyclically at Panel PC 900 With upgrade version V1.3.0.0 ARemb is booting up cyclically at Panel PC 900. This problem is solved. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 392665 Support for Smart Display Link 3 (SDL3) To configure a SDL3 Panel following upgrades have to be installed, too: SDL3 Transmitter: 5AC901.LSD3-00 V1.0.0.0 SDL3Receiver: 5DLSD3.1001-00 V1.0.0.0 APC910 system unit: 5PC910.SX0x-00 V1.3.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 399370 Preparation to support new targets Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.2.0.0: ID: 392665 Support for Smart Display Link 3 (SDL3) To configure a SDL3 Panel following upgrades have to be installed, too: SDL3 Transmitter: 5AC901.LSD3-00 V1.0.0.0 SDL3 Receiver: 5DLSDL.1001-00 V1.0.0.0 APC910 system unit: 5PC910.SX0x-00 V1.3.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.1.0: ID: 385450 Graphics driver issue with the Panel PC 900 as a windowsterminal server The use of a Panel PC 900 as a Windows terminal server has caused problems with the graphics driver. With an additional parameter in the hardware description file this problem is solved. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 385485 Preparation to support new targets Channel description changed: No Configuration description changed: No Firmwarechanged: No Version 1.1.0.0: ID: 373110 Support for 5AP923.1215-00 The display unit is supported with Automation Studio V4.0.17.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.7.0.0 | * | 06.02.2018 | 196 KB | EXE | AS4_HW_5AP933.185B-00.exe | |
| Popis |
V4.0 HW Upgrade (5AP933.185B-00) Revision information 5AP923.1215-00 Version 1.7.0.0: ID: 569185 Preparation to support the Panel PC 3100 and SDL4 Receiver (5DLSD4.1001-00). Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.5.0.0: ID: 554695 Bugfix for the module supervision The supervision of the 5AP9xx.xxxx-xx at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 554700 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.4.1.0: ID: 374245 / Support ID: 400142426, 400152825 Correction in the hardware descrption file The upload of the hardware works within the ARwin from versions: -T4.06, -H4.09, -M4.10, -G4.25 Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.4.0.0: ID: 406010 Supportof customized display units From Automation Runtime C4.10 on it is possible to run Automation Studio projects with Panel PC 2100 and customized display unit in a Panel PC 2100 with the corresponding standard display unit. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 407130 Revised terminal configuration The parameter "Use Type" (currently Use Types of the module: in Panel PC900, Panel PC 2100 or Automation Panel) has to be set depending on the usage of the display unit in a terminal configuration. In follow it is possible to make the correct terminal settings. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 407145 Support of customized display units From Automation Runtime C4.10 on it is possible to run Automation Studio projects with Panel PC 2100 andcustomized display unit in a Panel PC 2100 with the corresponding standard display unit. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.5.0: ID: 402955 ARemb is booting up cyclically at Panel PC 900 With upgrade version V1.3.0.0 ARemb is booting up cyclically at Panel PC 900. This problem is solved. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 392665 Support for Smart Display Link 3 (SDL3) To configure a SDL3 Panel following upgrades have to be installed, too: SDL3 Transmitter: 5AC901.LSD3-00 V1.0.0.0 SDL3 Receiver: 5DLSD3.1001-00 V1.0.0.0 APC910 system unit: 5PC910.SX0x-00 V1.3.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 399370 Preparation to support new targets Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.2.0.0: ID: 392665 Support for Smart Display Link 3 (SDL3) To configure a SDL3 Panel following upgrades have to be installed, too: SDL3 Transmitter: 5AC901.LSD3-00 V1.0.0.0 SDL3 Receiver: 5DLSDL.1001-00 V1.0.0.0 APC910 system unit: 5PC910.SX0x-00 V1.3.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.1.1.0: ID: 385450 Graphics driver issue with the Panel PC 900 as a windows terminal server The use of a Panel PC 900 as a Windows terminal server has caused problems with the graphics driver. With an additional parameter in the hardware description file this problemis solved. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 385485 Preparation to support new targets Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 373110 Support for 5AP923.1215-00 The display unit is supported with Automation Studio V4.0.17.x. Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
