DWL@DWL10000255632
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 2.1.0.0 | * | 26.07.2021 | 223 KB | EXE | AS4_HW_5AP920.1214-01.exe | |
| Popis |
V4.0 HW Upgrade (5AP920.1214-01) Revision information 5AP920.1214-01.1214-01 Version 2.1.0.0: ID: Adaptations for Automation Studio 4.11 Channel description changed: no Configuration descriptionchanged: yes Firmware changed: no Version 2.0.0.0: ID: 670959 Extensions Hypervisor from AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP900 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 APC2100 system unit: V2.1.0.0 APC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 APC3100 system unit: V2.1.0.0 AP900 panels: V2.0.0.0 5DLSDL.1000-01: V1.1.0.0 5DLSD3.1000-00: V1.2.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 670964 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677780 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of a missconfiguration or missingdisplayunit the Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.1.0: ID: 423560 Falsely available serial connection was removed Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.2: ID: 350270 Support for APC910 AS4.x: It is now possible to map a visualization for the APC910. Note: Starting with Automation Studio Version V4.0.15.0 + Visual Components V4.05.2 on a visualization can be operated on the APC910. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.1: ID: 350270 Support for APC910 AS4.x: It is now possible to map a visualization for the APC910. Note: Starting with Automation Studio Version V4.0.15.0 + Visual Components V4.05.2 ona visualization can be operated on the APC910. Channel description changed: No Configuration description changed: Yes Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 2.0.0.0 | * | 08.04.2020 | 220 KB | EXE | AS4_HW_5AP920.1214-01.exe | |
| Popis |
V4.0 HW Upgrade (5AP920.1214-01) Revision information 5AP920.1043-01 Version 2.0.0.0: ID: 670959 Extensions Hypervisor from AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used for allcomponents (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP900 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 APC2100 system unit: V2.1.0.0 APC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 APC3100 system unit: V2.1.0.0 AP900 panels: V2.0.0.0 5DLSDL.1000-01: V1.1.0.0 5DLSD3.1000-00: V1.2.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 670964 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677780 Module supervision of the Automation Panels from AR A4.81 on the AutomationPC: The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of amissconfiguration or missing display unit the Automation PC is starting up inthe service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed:No Version 1.0.0.1: ID: 350265 Support for APC910 AS4.x: It is now possible to map a visualization for the APC910. Note: Starting with Automation Studio Version V4.0.15.0 + Visual Components V4.05.2 on a visualization can be operated on the APC910. Channel description changed:No Configuration description changed: Yes Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.0.1.0 | * | 12.07.2019 | 1 MB | EXE | AS4_HW_5AP920.1214-01.exe | |
| Popis |
V4.0 HW Upgrade (5AP920.1214-01) Revision information 5AP920.1214-01 Version 1.0.1.0: ID: 423560 Falsely available serial connection was removed Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.2: ID: 350270 Support for APC910 AS4.x: It is now possible to map a visualization for the APC910. Note: Starting with Automation Studio Version V4.0.15.0 + Visual Components V4.05.2 on a visualization can be operated on the APC910. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.1: ID: 350270 Support for APC910 AS4.x: It is now possible to map a visualization for the APC910. Note: Starting with Automation Studio Version V4.0.15.0 + Visual Components V4.05.2 on a visualization can be operated on the APC910. Channel description changed: No Configuration description changed:Yes Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.0.0.2 | * | 08.10.2013 | 1 MB | EXE | AS4_HW_5AP920.1214-01.exe | |
| Popis |
V4.0 HW Upgrade (5AP920.1214-01) Revision information 5AP920.1214-01 Version 1.0.0.2: ID: 350270 Support for APC910 AS4.x:It is now possible to map a visualization for the APC910. Note: Starting with Automation Studio Version V4.0.15.0 + Visual Components V4.05.2 on a visualization can be operated on the APC910. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.1: ID: 350270 Support for APC910 AS4.x: It is now possible to map a visualization for the APC910. Note: Starting with Automation Studio Version V4.0.15.0 + Visual Components V4.05.2 on a visualizationcan be operated on the APC910. Channel description changed: No Configuration description changed: Yes Firmware changed: No |
|||||
