DWL@DWL10000401266
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
---|---|---|---|---|---|---|
2.2.1.0 | * | 23.08.2023 | 720 KB | EXE | AS4_HW_5AP1125.1043-I00.exe | |
Popis |
V4.0 HW Upgrade (5AP1125.1043-I00) Revision information 5AP1125.1043-I00 Version 2.2.1.0: ID: 774020 Configuration changes in case that the Panel is used as Panel PC in Terminal mode. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.2.0.0: ID: 708055 Extensions Extensions Hypervisor from AR A4.81: USB allocation between GPOS and RTOS also possible on the Automation Panel. This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Module supervision of the Automation Panels from AR A4.81 on the Automation PC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unitof aAutomation PC is activ from Automation Runtime version A4.81. In case ofa missconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.1.0.0: ID: 669070 Support of PPC2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 591085 Support of PPC3100 - The PPC3100 can be installed starting with harware-revision G0 (Additional screw holes added) - User's manal modified to V1.40 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552550 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552715 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 523890 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Version 1.0.0.0: ID: 445790 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.2.0.0 | * | 09.11.2020 | 400 KB | EXE | AS4_HW_5AP1125.1043-I00.exe | |
Popis |
V4.0 HW Upgrade (5AP1125.1043-I00) Revision information 5AP1125.1043-I00 Version 2.2.0.0: ID: 708055 Extensions ExtensionsHypervisor from AR A4.81: USB allocation between GPOS and RTOS also possible on the Automation Panel. This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Module supervision of the Automation Panels from AR A4.81 on the Automation PC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of aAutomation PC is activ from Automation Runtime version A4.81. In case of a missconfiguration or missing display unit the Panel PC/Automation PC is startingup in the service mode. This behavior can be configured via the configurationof the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.1.0.0: ID: 669070 Support of PPC2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 591085 Support of PPC3100 - The PPC3100 can be installed starting with harware-revision G0 (Additional screw holes added) - User's manal modified to V1.40 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552550 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552715 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 523890 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09(AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Version 1.0.0.0: ID: 445790 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.1.0.0 | * | 21.11.2019 | 399 KB | EXE | AS4_HW_5AP1125.1043-I00.exe | |
Popis |
V4.0 HW Upgrade (5AP1125.1043-I00) Revision information 5AP1125.1043-I00 Version 2.1.0.0: ID: 669070 Support of PPC2200 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 591085 Supportof PPC3100 - The PPC3100 can be installed starting with harware-revisionG0 (Additional screw holes added) - User's manal modified to V1.40 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552550 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552715 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 523890 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channeldescription changed: Yes Configuration description changed: Yes Firmware changed: Yes Version 1.0.0.0: ID: 445790 Support ofAS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.0.0.0 | * | 14.05.2018 | 7 MB | EXE | AS4_HW_5AP1125.1043-I00.exe | |
Popis |
V4.0 HW Upgrade (5AP1125.1043-I00) Revision information 5AP1125.1043-I00 Version 2.0.0.0: ID: 591085 Support of PPC3100 - The PPC3100 can be installed starting with harware-revision G0 (Additional screw holes added) - User's manal modified to V1.40 Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552550 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552715 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 523890 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Version 1.0.0.0: ID: 445790 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.3.0.0 | * | 01.09.2017 | 7 MB | EXE | AS4_HW_5AP1125.1043-I00.exe | |
Popis |
V4.0 HW Upgrade (5AP1125.1043-I00) Revision information 5AP1120.0702-I00 Version 1.3.0.0: ID: 552550 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552715 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Version 1.1.0.0: ID: 523875 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Version 1.0.0.0: ID: 446470 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |