DWL@DWL10000401265
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
---|---|---|---|---|---|---|
2.0.1.0 | * | 23.08.2023 | 670 KB | EXE | AS4_HW_5AP1120.0702-I00.exe | |
Popis |
V4.0 HW Upgrade (5AP1120.0702-I00) Revision information 5AP1120.0702-I00 Version 2.0.1.0: ID: 774025 Configuration changes in case that the Panel is used as Panel PC in Terminal mode. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 2.0.0.0: ID: 713420 Extensions Extensions Hypervisor from AR A4.81: USB allocation between GPOS and RTOS also possible on the Automation Panel. This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Module supervision of the Automation Panels from AR A4.81 on the Automation PC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unitof aAutomation PC is activ from Automation Runtime version A4.81. In case ofa missconfiguration or missing display unit the Panel PC/Automation PC is starting up in the service mode. This behavior can be configured via the configuration of the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.4.0.0: ID: 668140 / Support ID: 400306031 Support of PPC2200 and SDL4 - The PPC2200 and SDL4 can be used Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552550 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxxat the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552715 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed:No Firmware changed: No Version 1.1.0.0: ID: 523875 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Version 1.0.0.0: ID: 446470 Support of AS 4 Channel description changed: Yes Configuration descriptionchanged: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
2.0.0.0 | * | 11.01.2021 | 350 KB | EXE | AS4_HW_5AP1120.0702-I00.exe | |
Popis |
V4.0 HW Upgrade (5AP1120.0702-I00) Revision information 5AP1120.0702-I00.0702-I00 Version 2.0.0.0: ID: 713420 Extensions Extensions Hypervisor from AR A4.81: USB allocation between GPOS and RTOS also possible on the Automation Panel. This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) for AP1000 are recommended, mixed operation of the current and older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 5AC901.LSD4-00: V2.0.0.0 xPC2100 system unit: V2.1.0.0 xPC2200 system unit: V2.0.0.0 5ACCLI01.SDL0-000: V2.0.0.0 5ACCLI01.SDL3-000: V2.0.0.0 5ACCLI03.SDL4-000: V2.0.0.0 xPC3100 system unit: V2.1.0.0 5ACCLI02.SD40-000: V2.0.0.0 AP1000 panels: V2.0.0.0 5DLSDL.1001-00: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD4.1001-00: V2.0.0.0 Module supervision of the Automation Panels from AR A4.81 on the Automation PC: The supervision at the usage as display unit of a Panel PC is activ from Automation Runtime version C4.34. The supervision at the usage as display unit of a Automation PC is activ from Automation Runtime version A4.81. In case of a missconfiguration or missing display unit the Panel PC/Automation PC isstartingup in the service mode. This behavior can be configured via the configurationof the supervised option, the default is supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.4.0.0: ID: 668140 / Support ID: 400306031 Support of PPC2200 and SDL4 - The PPC2200 and SDL4 can be used Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552550 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552715 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminalmode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 523875 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Version 1.0.0.0: ID: 446470 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.4.0.0 | * | 07.11.2019 | 350 KB | EXE | AS4_HW_5AP1120.0702-I00.exe | |
Popis |
V4.0 HW Upgrade (5AP1120.0702-I00) Revision information 5AP1120.0702-I00 Version 1.4.0.0: ID: 668140 / Support ID: 400306031 Support of PPC2200 and SDL4 - The PPC2200 and SDL4 can be used Channeldescription changed: No Configuration description changed: Yes Firmware changed: No Version 1.3.0.0: ID: 552550 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552715 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel description changed: No Configuration description changed: No Firmware changed: No Version 1.1.0.0: ID: 523875 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) ARO4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Version 1.0.0.0: ID: 446470 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |
|||||
Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
1.3.0.0 | * | 01.09.2017 | 7 MB | EXE | AS4_HW_5AP1120.0702-I00.exe | |
Popis |
V4.0 HW Upgrade (5AP1120.0702-I00) Revision information 5AP1120.0702-I00 Version 1.3.0.0: ID: 552550 Bugfix for the module supervision The supervision of the 5AP1xxx.xxxx-xxx at the usage as display unit of a Panel PC is activ from Automation Runtime version D4.34 on. In case of a missconfiguration of the display unit the Panel PC is starting up in the service mode. Channel description changed: No Configuration description changed: No Firmware changed: No ID: 552715 Check of station number and INA Node number in terminal mode The station number and the INA node number must be identical in terminal mode. If this is not the case, an error message is outputted by Automation Studio. Channel descriptionchanged: No Configuration description changed: No Firmware changed:No Version 1.1.0.0: ID: 523875 Bugfix Parent mechanism from Version AR U4.06 (AS 4.0) AR H4.09 (AS 4.1) AR O4.10 (AS 4.1) AR D4.26 (AS 4.2) AR B4.33 (AS 4.3) Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Version 1.0.0.0: ID: 446470 Support of AS 4 Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes |