DWL@DWL10000304632
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 2.0.0.0 | * | 08.04.2020 | 208 KB | EXE | AS4_HW_5AC901.LSD3-00.exe | |
| Popis |
V4.0 HW Upgrade (5AC901.LSD3-00) Revision information 5AC901.LSD3-00 Version 2.0.0.0: ID: 664620 / Support ID: 400300350 Bugfix: serial touch did not work with ARwin. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 666930 Extensions Hypervisor from AR A4.81 USB allocation between GPOS and RTOS also possible on the Automation Panel.This requires that the appropriate hardware upgrades are used for all components (APC/PPC, AP, SDLx Receiver, SDLx Transmitter). Starting with AS 4.8 following HWX upgrades (or newer) are recommended for APC910 + TS17 CPU, mixed operation of the currentand older HWX upgrades is not recommended: APC910 system unit: V2.1.0.0 5PC900.TS17-xx: V2.1.0.0 5AC901.LSD3-00: V2.0.0.0 AP1000 panels: V2.0.0.0 AP9x3 panels: V2.0.0.0 AP9xD panels: V2.0.0.0 AP900 panels: V2.0.0.0 AP5000 panels: V2.0.0.0 AP5000 extension unit: V2.0.0.0 5DLSD3.1001-00: V2.0.0.0 5DLSD3.1003-00: V2.0.0.0 Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 666935 EPLAN Daten implemented Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 677885 Module supervision of the APC910 Monitor/Panel option from AR A4.81: The supervision of the APC910 Monitor/Panel option is activ from AutomationRuntime version A4.81. In case of a missconfiguration or missing APC910 Monitor/Panel option the Automation PC is starting up in the service mode. This behaviorcan be configured via the configuration of the supervised option, the defaultis supervised = on. Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 682005 Support for IOMapping starting with AS 4.8.2/AR A4.82. Channel description changed: Yes Configuration description changed: No Firmware changed: No Version 1.0.1.0: ID: 392055 Module is no longer markedas an accessory Channel description changed: No Configuration description changed: No Firmware changed: No ID: 399610 Unnecessary warning ("HWD error") removed from logger Channel description changed: No Configuration description changed: No Firmware changed: No ID: 413155 The module is supported in VC Windows Terminal in AS4.x Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 392630 Initial version V1.0.0.0 To configure a SDL3 Panel following upgrades haveto be installed, too: APC910 system unit 5PC910.SX0x-00 V1.3.0.0 SDL3 Receiver: 5DLSDL.1001-00 V1.0.0.0 Automation Panel 9x3: 5AP9x3.xxxx-xx V1.2.0.0 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.0.1.0 | * | 18.02.2015 | 335 KB | EXE | AS4_HW_5AC901.LSD3-00.exe | |
| Popis |
V4.0 HW Upgrade (5AC901.LSD3-00) Revision information 5AC901.LSD3-00 Version 1.0.1.0: ID: 392055 Module is no longer marked as an accessory Channel description changed: No Configuration description changed: No Firmware changed: No ID: 399610 Unnecessary warning ("HWD error") removed from logger Channel description changed: No Configuration description changed: No Firmware changed: No ID: 413155 The module is supported in VC Windows Terminal in AS4.x Channel description changed: No Configuration description changed: Yes Firmware changed: No Version 1.0.0.0: ID: 392630 Initial version V1.0.0.0 To configure a SDL3 Panel following upgrades have to be installed, too: APC910 system unit 5PC910.SX0x-00 V1.3.0.0 SDL3 Receiver: 5DLSDL.1001-00 V1.0.0.0 Automation Panel 9x3: 5AP9x3.xxxx-xx V1.2.0.0 Channel description changed: Yes Configuration description changed: Yes Firmware changed: No |
|||||
