DWL@DWL10000059005
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 1.8.0.0 | * | 31.03.2021 | 2 MB | EXE | AS3.0_HW_X20IF1072.exe | |
| Popis |
V3.0 HW Upgrade (X20IF1072) Revision information X20IF1072 Version 1.8.0.0: ID: 718920 Resolve potential boot and warm restart issue In rare cases it could happen that the module is not reliably identified after a bootup or warm restart. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(15), 1\7968_1.pci(5), 1\7968_4.pci(4), 1\7968a0.can(130), 1\7968a1.can(130), 1\7968a4.can(0) Version 1.7.0.0: ID: 676375 / Support ID: 400312519 Support for hardware variant 4 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(15), 1\7968_1.pci(5), 1\7968_4.pci(3), 1\7968a0.can(130), 1\7968a1.can(130), 1\7968a4.can(0) Version 1.6.0.0: ID: 683545 / Support ID: 400315650 Corrected handling of RTR objects Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(15), 1\7968_1.pci(5), 1\7968a0.can(130), 1\7968a1.can(130) Version 1.5.0.0: ID: 637125 Support for hardware variant 1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(15), 1\7968_1.pci(5), 1\7968a0.can(122), 1\7968a1.can(122) Version 1.2.0.0: ID: 600775 / Support ID: 301108691 Boot behavior of X20CP15xx is incorrect. X20IF1072 sporadically causes a boot error in X20CP15xx. Channel description changed: No Configurationdescription changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(12), 1\7968a0.can(122) Version 1.1.0.0: ID: 584555 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611300 Module documentation revised Data sheet V2.33 Channel description changed: No Configurationdescription changed: No Firmware changed: No Firmware: 1\7968_0.pci(11), 1\7968a0.can(122) Version 1.0.8.0: ID: 517330 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.7.0: ID: 473625 / Support ID: 400181858 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.6.0: ID: 465955 / Support ID: 400174661 Enhancement data point ModuleOk, update online help, Ecad data for AS4 added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.5.2: ID: 291720 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.4.0: ID: 229080 CAN transmitter blockade after cable un-/plugged corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(122) Version 1.0.3.0: ID: 224475 CAN TransmitQueue Reset command corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(120) Version 1.0.2.0: ID: 183700 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) Version 1.0.1.0: ID: 164880 New Firmware V5 Error correction: problems when booting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.7.0.0 | * | 21.08.2020 | 2 MB | EXE | AS3.0_HW_X20IF1072.exe | |
| Popis |
V3.0 HW Upgrade (X20IF1072) Revision information X20IF1072 Version 1.7.0.0: ID: 676375 / Support ID: 400312519 Support for hardware variant 4 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(15), 1\7968_1.pci(5), 1\7968_4.pci(2), 1\7968a0.can(130), 1\7968a1.can(130), 1\7968a4.can(0) Version 1.6.0.0: ID: 683545 / Support ID: 400315650 Corrected handling of RTR objects Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(15), 1\7968_1.pci(5), 1\7968a0.can(130), 1\7968a1.can(130) Version 1.5.0.0: ID: 637125 Support for hardware variant 1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(15), 1\7968_1.pci(5),1\7968a0.can(122), 1\7968a1.can(122) Version 1.2.0.0: ID: 600775 / Support ID: 301108691 Boot behavior of X20CP15xx is incorrect. X20IF1072 sporadically causes a boot error in X20CP15xx. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(12), 1\7968a0.can(122) Version 1.1.0.0: ID: 584555 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611300 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(11), 1\7968a0.can(122) Version 1.0.8.0: ID: 517330 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.7.0: ID: 473625 / Support ID: 400181858 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.6.0: ID: 465955 / Support ID: 400174661 Enhancement data point ModuleOk, update online help, Ecad data for AS4 added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.5.2: ID: 291720 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.4.0: ID: 229080 CAN transmitter blockade after cable un-/plugged corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(122) Version 1.0.3.0: ID: 224475 CAN TransmitQueue Reset command corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(120) Version 1.0.2.0: ID: 183700 New diagnostic data points Newdiagnostic data points : Serial number, Module ID, Hardware variant, Firmwareversion Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) Version 1.0.1.0: ID: 164880 New Firmware V5 Error correction: problems when booting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.6.0.0 | * | 29.04.2020 | 1 MB | EXE | AS3.0_HW_X20IF1072.exe | |
| Popis |
V3.0 HW Upgrade (X20IF1072) Revision information X20IF1072 Version 1.6.0.0: ID: 683545 / Support ID: 400315650 Corrected handling of RTR objects Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(15), 1\7968_1.pci(5), 1\7968a0.can(130), 1\7968a1.can(130) Version 1.5.0.0: ID: 637125 Support for hardware variant 1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(15), 1\7968_1.pci(5), 1\7968a0.can(122), 1\7968a1.can(122) Version 1.2.0.0: ID: 600775 / Support ID: 301108691 Boot behavior of X20CP15xx is incorrect. X20IF1072 sporadically causes a boot error in X20CP15xx. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(12), 1\7968a0.can(122) Version 1.1.0.0: ID: 584555 CAN passive error In some rare cases the CAN controller in theBC detects erroneous bit errorsin CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes ID: 611300 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(11), 1\7968a0.can(122) Version 1.0.8.0: ID: 517330 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.7.0: ID: 473625 / Support ID: 400181858 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.6.0: ID: 465955 / Support ID: 400174661 Enhancement data point ModuleOk, update online help, Ecad data for AS4 added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.5.2: ID: 291720 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.4.0: ID: 229080 CAN transmitter blockade after cable un-/plugged corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(122) Version 1.0.3.0: ID: 224475 CAN TransmitQueue Reset command corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(120) Version 1.0.2.0: ID: 183700 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) Version 1.0.1.0: ID: 164880 New Firmware V5 Error correction: problems when booting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.5.0.0 | * | 30.04.2019 | 1 MB | EXE | AS3.0_HW_X20IF1072.exe | |
| Popis |
V3.0 HW Upgrade (X20IF1072) Revision information X20IF1072 Version 1.5.0.0: ID: 637125 Support for hardware variant 1 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(15), 1\7968_1.pci(5), 1\7968a0.can(122), 1\7968a1.can(122) Version 1.2.0.0: ID: 600775 / Support ID: 301108691 Boot behavior of X20CP15xx is incorrect. X20IF1072 sporadically causes a boot error in X20CP15xx. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(12), 1\7968a0.can(122) Version 1.1.0.0: ID: 584555 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611300 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(11), 1\7968a0.can(122) Version 1.0.8.0: ID: 517330 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.7.0: ID: 473625 / Support ID: 400181858 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.6.0: ID: 465955 / SupportID: 400174661 Enhancement data point ModuleOk, update online help, Ecad data for AS4 added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.5.2: ID: 291720 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.4.0: ID: 229080 CAN transmitter blockade after cable un-/plugged corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(122) Version 1.0.3.0: ID: 224475 CAN TransmitQueue Reset command corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(120) Version 1.0.2.0: ID: 183700 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) Version 1.0.1.0: ID: 164880 New Firmware V5 Error correction: problems when booting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.2.0.0 | * | 31.10.2018 | 1 MB | EXE | AS3.0_HW_X20IF1072.exe | |
| Popis |
V3.0 HW Upgrade (X20IF1072) Revision information X20IF1072 Version 1.2.0.0: ID: 600775 / Support ID: 301108691 Boot behavior ofX20CP15xx is incorrect. X20IF1072 sporadically causes a boot error in X20CP15xx. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(12), 1\7968a0.can(122) Version 1.1.0.0: ID: 584555 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611300 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(11), 1\7968a0.can(122) Version 1.0.8.0: ID: 517330 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.7.0: ID: 473625 / Support ID: 400181858 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmwarechanged: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.6.0: ID: 465955 / Support ID: 400174661 Enhancement data point ModuleOk, update online help, Ecad data for AS4 added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.5.2: ID: 291720 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.4.0: ID: 229080 CAN transmitter blockade after cable un-/plugged corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(122) Version 1.0.3.0: ID: 224475 CAN TransmitQueue Reset command corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(120) Version 1.0.2.0: ID: 183700 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) Version 1.0.1.0: ID: 164880 New Firmware V5 Error correction: problems when booting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.1.0.0 | * | 07.09.2018 | 1 MB | EXE | AS3.0_HW_X20IF1072.exe | |
| Popis |
V3.0 HW Upgrade (X20IF1072) Revision information X20IF1072 Version 1.1.0.0: ID: 584555 CAN passive error In some rare cases the CAN controller in the BC detects erroneous bit errors in CAN frames if the incoming frame starts during a short period of time before the BC itself starts the transmission of a CAN frame. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 611300 Module documentation revised Data sheet V2.33 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(11), 1\7968a0.can(122) Version 1.0.8.0: ID: 517330 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.7.0: ID: 473625 / Support ID: 400181858 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.6.0: ID: 465955 / Support ID: 400174661 Enhancement data point ModuleOk, update online help, Ecad data for AS4 added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware:1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.5.2: ID: 291720 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.4.0: ID: 229080 CAN transmitter blockade after cable un-/plugged corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(122) Version 1.0.3.0: ID: 224475 CAN TransmitQueue Reset command corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(120) Version 1.0.2.0: ID: 183700 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) Version 1.0.1.0: ID: 164880 New Firmware V5 Error correction: problems when booting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.0.8.0 | * | 30.01.2017 | 1 MB | EXE | AS3.0_HW_X20IF1072.exe | |
| Popis |
V3.0 HW Upgrade (X20IF1072) Revision information X20IF1072 Version 1.0.8.0: ID: 517330 Module documentation revised Data sheet V2.32 Channel description changed: No Configuration descriptionchanged: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.7.0: ID: 473625 / Support ID: 400181858 Error reading NodeSwitch corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.6.0: ID:465955 / Support ID: 400174661 Enhancement data point ModuleOk, update online help, Ecad data for AS4 added Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.5.2: ID: 291720 Compatibility to ATOM CPU Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(8), 1\7968a0.can(122) Version 1.0.4.0: ID: 229080 CAN transmitter blockade after cable un-/plugged corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(122) Version 1.0.3.0: ID: 224475 CAN TransmitQueue Reset command corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\7968_0.pci(5), 1\7968a0.can(120) Version 1.0.2.0: ID: 183700 New diagnostic data points New diagnostic data points : Serial number, Module ID, Hardware variant, Firmware version Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) Version 1.0.1.0: ID: 164880 New FirmwareV5 Error correction: problems when booting Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\7968_0.pci(5), 1\7968a0.can(116) |
|||||
