DWL@DWL10000314835
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 1.1.1.0 | * | 19.07.2018 | 3 MB | EXE | AS2.6_HW_X20AI2438.exe | |
| Popis |
V2.7 HW Upgrade (X20AI2438) Revision information X20AI2438 Version 1.1.1.0: ID: 603819 APROL: missing attribute for channel-Parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(100), 1\45993_2.fw(100) Version 1.1.0.0: ID: 562740 / Support ID: 400231500 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571600 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(100), 1\45993_2.fw(100) Version 1.0.8.1: ID: 536345 Module documentation revised Data sheet V1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.8.0: ID: 519095 De-/Activation of subtitution mode revised The feature "subtitution mode" can be deactivated completely. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 529665 Module documentation revised Data sheet V 1.20 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.7.0: ID: 464800 Ecad data (EPlan) corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 466820 Support for module DTM revised The user defineditem designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed:Yes Firmware changed: No ID: 476495 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 497215 Module documentation revised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.6.5: ID: 466820 Supportfor module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 476495 DTM diagnose revised DTM diagnosis function can beused on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 497215 Module documentation revised Data sheet V1.10 Channeldescription changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.6.0: ID: 434345 Correction hwx/hwc wrong MaxInSize-declaration Channel description changed: No Configuration descriptionchanged: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.4.2: ID: 402900 / Support ID: 400142019 Multiplexed mode revised FIO datapionts for multiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.4.0: ID: 366205 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and order of registers (IO-Mapping) - Adaption of asynchronous HART communication --> Asynchronous request of data points PvSampleTime adapted to documentation. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 368295 Parameter ID adapted to DPS driver Anpassung of Parameter ID "Taskclass" to DPS stream Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.3.1: ID: 366205 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and orderof registers (IO-Mapping) - Adaption of asynchronous HART communication --> Asynchronous request of data points PvSampleTime adapted to documentation. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 368295 Parameter ID adapted to DPS driver Anpassung of Parameter ID "Taskclass" to DPS stream Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.3.0: ID: 324125 Default settings in bus controller model corrected Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 324390 / Support ID: 400104680 Correct functionality on SG3 CPU's Channel description changed: Yes Configuration description changed: No Firmware changed:No ID: 327660 Enhancement english online-help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.1.3: ID: 243085 Support X20AI2438 Enhancement DTM interface Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 316025 Corretions for AS4 DTM Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(86) Version 1.0.0.2: ID: 243085 Support X20AI2438 German online help added Channel description changed: No Configurationdescription changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(83) Version 1.0.0.0: ID: 243085 Support X20AI2438 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_2.fw(81), 1\45993_1.fw(40) |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.1.0.0 | * | 09.01.2018 | 3 MB | EXE | AS2.6_HW_X20AI2438.exe | |
| Popis |
V2.7 HW Upgrade (X20AI2438) Revision information X20AI2438 Version 1.1.0.0: ID: 562740 / Support ID: 400231500 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571600 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(100), 1\45993_2.fw(100) Version 1.0.8.1: ID: 536345 Module documentation revised Data sheet V1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.8.0: ID: 519095 De-/Activation of subtitution mode revised Thefeature "subtitution mode" can be deactivated completely. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 529665 Module documentation revised Data sheet V 1.20 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.7.0: ID: 464800 Ecad data (EPlan) corrected Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 466820 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 476495 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 497215 Module documentation revised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.6.5: ID: 466820 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 476495 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 497215 Module documentation revised Data sheet V1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.6.0: ID: 434345 Correction hwx/hwc wrong MaxInSize-declaration Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.4.2: ID: 402900 / Support ID: 400142019 Multiplexed mode revised FIO datapionts for multiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.4.0: ID:366205 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and order of registers (IO-Mapping) - Adaption of asynchronous HART communication --> Asynchronous request of data points PvSampleTime adapted to documentation. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 368295 Parameter ID adapted to DPS driver Anpassung of Parameter ID "Taskclass" to DPS stream Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.3.1: ID: 366205 Compilation of homogeneous Channel Description/Channels section Module family: "HART" (20Ax243x) - Adaption of Descriptions and order of registers (IO-Mapping) - Adaption of asynchronous HART communication --> Asynchronous request of data points PvSampleTime adapted to documentation. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 368295 Parameter ID adapted to DPS driver Anpassung of Parameter ID "Taskclass" to DPS stream Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.3.0: ID: 324125 Default settings in bus controller model corrected Channel descriptionchanged: No Configuration description changed: No Firmware changed:Yes ID: 324390 / Support ID: 400104680 Correct functionality onSG3 CPU's Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 327660 Enhancement english online-help Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(90) Version 1.0.1.3: ID: 243085 Support X20AI2438 Enhancement DTM interface Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes ID: 316025 Corretions for AS4 DTM Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(86) Version 1.0.0.2: ID: 243085 Support X20AI2438 German online help added Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_1.fw(40), 1\45993_2.fw(83) Version 1.0.0.0: ID: 243085 Support X20AI2438 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\45993_2.fw(81), 1\45993_1.fw(40) |
|||||
