DWL@DWL10000303947
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 2.5.4.0 | * | 05.07.2017 | 2 MB | EXE | AS2.6_HW_X67BC8513.L12.exe | |
| Popis |
V2.6 HW Upgrade (X67BC8513.L12) Revision information X67BC8513.L12 Version 2.5.4.0: ID: 540360 / Support ID: 400202320 BC sporadically not going into Operational due to X2X-bus problems at startup Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_1.fw(419), 1\45996_3.fw(419), 1\46029_6.fw(819), 1\46029_7.fw(819) Version 2.5.3.0: ID: 523595 /Support ID: 400205694 safety modules not switching to operational state SDO streaming connection via UDP is not always established when PLC and SafeLogic are booted together. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_1.fw(417), 1\45996_3.fw(417), 1\46029_6.fw(819), 1\46029_7.fw(819) Version 2.5.2.0: ID: 493925 / Support ID: 400103115, 400101850, 400154063, 400190752 First POWERLINK UDP ASnd SDO transfert after long time takes up to 5s. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_1.fw(415), 1\45996_3.fw(415), 1\46029_6.fw(819), 1\46029_7.fw(819) Version 2.5.0.0: ID: 468225 optimization of X2X FW updates Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 468230 / Support ID: 400177243 X2X FW update of several X2X modules is not working Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 468235 / Support ID: 400178654 Safety modules in connection with PLK BCs, withonly input datapoints, are not initialized.by SL Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 468585 CiR support Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\45996_1.fw(413), 1\45996_3.fw(413), 1\46029_6.fw(819), 1\46029_7.fw(819) Version 2.3.0.0: ID: 460150 / Support ID: 400168329 I/O modules behind POWERLINK bus controllers no longer achieving Operational mode after multiple power-on cycles Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 460270 / Support ID: 400150525 Error 114834 "Fehler interner SLX-Kommandokanal" bei CPU PowerCycle wenn SLX hinter BC Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_1.fw(411), 1\45996_3.fw(411), 1\46029_6.fw(819), 1\46029_7.fw(819) Version 2.2.0.0: ID: 451510 / Support ID: 400167181 X67BC8513.L12 HW1 (Rev A5) boots from FW 152 only from bank 0 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_1.fw(401), 1\45996_3.fw(401), 1\46029_6.fw(819), 1\46029_7.fw(819) Version 2.1.0.0: ID: 439145 / Support ID: 400150496 I/O modules behind POWERLINK bus controllers no longer achieving Operational mode after multiple power-on cycles Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 439250 / Support ID: 400128436 I/O modules behind POWERLINK bus controllers no longer achieving Operational mode after multiple power-on cycles Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_1.fw(400), 1\45996_3.fw(400), 1\46029_6.fw(819), 1\46029_7.fw(819) Version 2.0.1.0: ID: 410620 Missing I/O FW in Upgrade >= 2.0.0.0 Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_1.fw(300), 1\45996_3.fw(300), 1\46029_6.fw(819), 1\46029_7.fw(819) Version 2.0.0.1: ID: 390315 / Support ID: 400129274 Uncommon X2X settings cause permanent boot of bus controller Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 393320 / Support ID: 400138511 X2X communication revised A new firmware for hardware variant 3 (BC-Part)was released. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_1.fw(211), 1\45996_3.fw(211) Version 2.0.0.0: ID: 390315 / Support ID: 400129274 Uncommon X2X settings cause permanent boot of bus controller Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_1.fw(210), 1\45996_3.fw(210) Version 1.3.4.3: ID: 305060 / Support ID: 400091367 Suppression of measurement peaks Suppression of measurement peaks after a fast rising or falling of the input signal. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 305190 / Support ID: 400094368 ACOPOSmulti with SafeMC, asynchronous communication lost When there was a high load on the CPU, asynchronous communication to the buscontroller was interrupted. Restarting the boscontroller restored communication. Loss of asynchronous communication caused the safety-IO to stop. Channel description changed: No Configuration descriptionchanged: No Firmware changed: Yes ID: 310885 / Support ID: 400097674 POWERLINK V1: Bug-fix for Up/Downgrade POWERLINK V1 FW upgradeproblem could be accored after PowerOn beginning with HW- Upgrade Version 1.3.1.0 Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 311050 / Support ID: 400051206 Expansion: Link- selector flag New datapoints:<br/>- RedundancyFirstLinkState<br/>- RedundancySecondLinkState Channel descriptionchanged: Yes Configuration description changed: Yes Firmware changed: No Firmware: 1\45996_3.fw(168), 1\46029_6.fw(818), 1\46029_7.fw(818) Version 1.3.3.0: ID: 299010 / Support ID: 400090781 Problem with FW-Update of IO modules on Powerlink buscontrollers The firmware update of IO modules does not work in certain configurations. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_3.fw(165), 1\46029_6.fw(816), 1\46029_7.fw(816) Version 1.3.2.0: ID: 288295 Error correction gate time measurement on local I/O Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\45996_3.fw(163), 1\46029_6.fw(816), 1\46029_7.fw(816) Version 1.3.1.0: ID: 277200 Support of 'Multiple Asynchronous Send' Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 277770 New X2X datapoints - NettimeOffsetX2X and NettimeX2X Channel description changed: Yes Configuration description changed: Yes Firmware changed: Yes Firmware: 1\45996_3.fw(161), 1\46029_6.fw(800) Version 1.2.1.0: Firmware: 1\45996_1.fw(152), 1\45996_3.fw(153), 1\46029_6.fw(800) |
|||||
