DWL@DWL10000878040
| 版本 | 语言 | 操作系统 | 日期 | 尺寸 | 类型 | 下载 |
|---|---|---|---|---|---|---|
| 1.6.2.1 | * | 10/06/2026 | 3 MB | EXE | AS6_HW_X20cAI2438.exe | |
| 描述 |
V6.0 HW Upgrade (X20cAI2438) Revision information X20cAI2438 Version 1.6.2.1: ID: Firmware signature enables automatic verification of the authenticity on the target system The firmware package contains a digital signature that is automatically validated by Automation Runtime versions, which are supporting this feature. Thisensures that the installed firmware is unchanged and comes from a trusted source. Channel descriptionchanged: no Configuration description changed: yes Firmware changed: no Version 1.6.2.0: ID: 775195 Replacement of the interfacecard in AS Replace HW Modul" works correktly Channel descriptionchanged: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(130) Version 1.6.0.0: ID: 764115 Fix: X20AI2438, X20AO2438: within HART 7 DTM used extended commands failed. If the extendend commands format was used, the modules returned a timeout error message. Channel description changed: No Configurationdescription changed: No Firmware changed: Yes ID: 765410 Error correction of the hwx file There was an error, that the filter of InputMTU_UIF and OutputMTU_UIF had the incorrect filter value. As effect of thatthe OCTET datapoints wheren´t visible, Channel description changed: No Configuration description changed: Yes Firmware changed: No Firmware: 1\57838_2.fw(130) Version 1.5.0.0: ID: Adaptationsfor Automation Studio 4.11 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.4.0.0: ID: 719005 Adaptation of the configuration description Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 720910 Product improvement Corrected error response in connection with the ASHart library Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\57838_2.fw(120) Version 1.3.0.0: ID:678660 Adaptations for fieldbus support in AS4. Channel descriptionchanged: No Configuration description changed: Yes Firmware changed: No ID: 711220 New documentation 1.32 available Channel description changed: No Configuration description changed: No Firmwarechanged: No ID: 711265 Product improvement Improved behavior in the event of interference with the carrier detect signal. Channel description changed: No Configuration description changed: No Firmware changed: Yes Firmware: 1\57838_2.fw(110) Version 1.2.0.0: ID: Adaptations for Automation Studio 4.8 Channel description changed: no Configuration description changed: yes Firmware changed: no Version 1.1.1.0: ID: 603829 APROL: Missing attribute for channel-parameter with "Sig_*" inserted Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.1.0.0: ID: 562730 Improved reset behavior In rare cases, analog value measurement does not start after a reset. Channel description changed: No Configuration description changed: No Firmware changed: Yes ID: 571630 Module documentation revised Data sheet V1.24 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(100) Version 1.0.8.1: ID: 520405 De-/Activation of subtitution mode revised The feature "subtitution mode" can be deactivated completely. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 520640 Module documentation revised Data sheet V 1.21 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.7.0: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V 1.11 Channel description changed: No Configuration description changed: No Firmware changed: No ID: 503185 Correction of Ecaddata (EPlan) Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.6.5: ID: 492165 DTM diagnose revised DTM diagnosis function can be used on cyclic data transfer as well. Channel description changed: Yes Configuration description changed: No Firmware changed: No ID: 499420 Support for module DTM revised The user defined item designation is shown in livelist of module (required AR: B4.25 or higher) Channel description changed: No Configuration description changed: Yes Firmware changed: No ID: 499425 Module documentation revised Data sheet V1.10 Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.3: ID: 402930 Multiplexed mode revised FIO datapionts for multiplexed mode corrected. Channel description changed: Yes Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) Version 1.0.0.2: ID: 297620 Support X20cAI2438 Support for Automation Studio Channel description changed: No Configuration description changed: No Firmware changed: No Firmware: 1\57838_2.fw(90) |
|||||
