Short description
I/O module | 2 inputs for thermocouples |
General information
B&R ID code | 0xBB98 |
Status indicators | I/O function per channel, operating state, module status |
Diagnostics | |
Module run/error | Yes, using LED status indicator and software |
Inputs | Yes, using LED status indicator and software |
Power consumption | |
Bus | 0.35 W |
Internal I/O | 0.5 W |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
UL |
cULus E115267 Industrial control equipment |
HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
DNV |
Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
LR | ENV1 |
ABS | Yes |
BV |
EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
EAC | Yes |
KC | Yes |
Thermocouple temperature inputs
Electrical properties
Electrical isolation | Channel isolated from channel and bus |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
Note |
Order 1x terminal block X20TB1E for internal/remote terminal temperature compensation separately. Order 1x terminal block X20TB1F for external terminal temperature compensation separately. Order 1x bus module X20BM11 separately. |
Pitch | 12.5+0.2 mm |
Malzeme numarası:
X20ATA492Açıklama:
- Single-channel electrical isolation
- Integrated terminal temperature compensation
- 2x PT1000 sensor integrated in the terminal
- 2x external PT1000 sensor can be connected, 2-wire or 4-wire connections
- NetTime timestamp: Moment of measurement
The module is equipped with 2 inputs for J, K, N, S, B, R, E, C and T thermocouple sensors. The 2 measurement channels are electrically isolated from each other.
This module can also be equipped with the X20TB1E thermocouple terminal block with integrated PT1000 temperature sensors. This makes it possible to achieve optimal terminal temperature compensation.
Zorunlu aksesuarlar
Bus modules
Automation Studio donanım yükseltmeleri | Sürüm (Tarih) | İndirme |
---|---|---|
V2.7 HW Upgrade (X20ATA492) | EXE / 1 MB | |
V3.0 HW Upgrade (X20ATA492) | EXE / 2 MB | |
V4.0 HW Upgrade (X20ATA492) | EXE / 2 MB |
Dökümantasyon | Sürüm (Tarih) | İndirme |
---|---|---|
Data sheet X20ATA492 | PDF / 650 KB | |
Installation- / EMC-Guide | PDF / 20 MB | |
X20 System User´s Manual | PDF / 7 MB |
E-CAD (Elektro veya EPLAN şablonları) | Sürüm (Tarih) | İndirme |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 MB |
M-CAD (Mechan. Şablonlar) | Sürüm (Tarih) | İndirme |
---|---|---|
3D File DXF/STEP X20 Electronic module | ZIP / 10 KB | |
3D File STEP X20 I/O-Slice | ZIP / 872 KB | |
Dimensions PDF X20 Electronic module | PDF / 3 KB |