Short description
| I/O module | 4 safe type A digital inputs, 4 pulse outputs, 24 VDC |
General information
Safety characteristics
I/O power supply
| Nominal voltage | 24 VDC |
| Voltage range | 24 VDC -15% / +20% |
| Integrated protection | Reverse polarity protection |
Safe digital inputs
| Quantity | 4 |
| Variant | Type A |
| Nominal voltage | 24 VDC |
| Input characteristics per EN 61131-2 | Type 1 |
| Input filter | |
| Hardware | ≤150 μs |
| Software | Configurable between 0 and 500 ms |
| Input circuit | Sink |
| Input voltage | 24 VDC -15% / +20% |
| Input current at 24 VDC | Max. 4.59 mA, hardware revision J0 and later: Max. 3.28 mA |
| Input resistance | Min. 5.23 kΩ, hardware revision J0 and later: Min. 7.33 kΩ |
| Error detection time | 100 ms |
| Insulation voltage between channel and bus | 500 Veff |
| Switching threshold | |
| Low | <5 VDC |
| High | >15 VDC |
| Cable length between signal source (pulse output or external signal) and input |
Max. 60 m with unshielded line Max. 400 m with shielded line |
Pulse outputs
Operating conditions
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | 0 to 2000 m, no limitation |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Horizontal mounting orientation | 0 to 60°C |
| Vertical mounting orientation | 0 to 50°C |
| Derating | See section "Derating". |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Note |
Order 1x safety-keyed terminal block separately. Order 1x safety-keyed bus module separately. |
| Pitch | 25+0.2 mm |
Malzeme Numarası:
X20SI4100Açıklama:
- 4 safe digital inputs
- 4 pulse outputs
- Sink circuit
- Software input filter configurable for each channel
This module is equipped with 4 safe digital inputs. It is designed for a nominal voltage of 24 VDC.
The module can be used to read various digital signals in safety-related applications up to PL e or SIL 3.
The module is equipped with filters that are individually configurable for switch-on and switch-off behavior. The module also provides pulse signals for diagnosing the sensor line.
This module is designed for X20 12-pin terminal blocks.
Gerekli aksesuarlar
| Araçlar / Faydalı Programlar / Örnekler | Version (Date) | Download |
|---|---|---|
| Sistema library | ZIP / 319 KB |
| Automation Studio Donanım Güncellemeleri | Version (Date) | Download |
|---|---|---|
| V3.0 HW Upgrade (X20SI4100) | EXE / 3 MB | |
| V4.0 HW Upgrade (X20SI4100) | EXE / 3 MB | |
| V4.6 HW Upgrade (X20SI4100) | EXE / 1 MB |
| Dokümantasyon | Version (Date) | Download |
|---|---|---|
| Data sheet X20(c)SIx1x0 - Legacy | PDF / 3 MB | |
| Data sheet X20(c)SIx1x0 - mapp Safety | PDF / 3 MB |
| E-CAD (Elektrik veya EPLAN Taslakları) | Version (Date) | Download |
|---|---|---|
| X20 EPLAN P8 from V2.4 | EXE / 123 MB |
| M-CAD (Mekanik Taslaklar) | Version (Date) | Download |
|---|---|---|
| 3D file STEP X20(c)Sxxxxx - Terminal block right side | ZIP / 21 KB | |
| DFX File I/O Slice | ZIP / 4 KB | |
| Dimensions PDF X20 I/O Slice | PDF / 45 KB |
