General information
Module type ACOPOS P3 plug-in module
B&R ID code 0xE827
Slot Slot 1
Max. power consumption P[W] = (15 V * IEncoder[A]) + 2 W
Max. 6.5 W
Certifications
CE Yes
UL cULus E225616
Power conversion equipment
KC Yes
Encoder interfaces
Quantity 1
Type Digital multi-encoder interface, configurable
Connections 8-pin female Mini I/O connector
Status indicators None
Electrical isolation
Encoder - ACOPOS P3 No
Max. encoder cable length 75 m
Depends on the cross section of the power supply wires of the encoder cable
Encoder power supply
Output voltage Configurable
Typ. 11.45 V ±0.1 V / 5.2 V ±0.1 V
Load capacity Max. 300 mA (HIPERFACE DSL: Max. 200 mA)
Sense lines 2, compensation of max. 2x 0.7 V
Protective measures
Short-circuit proof Yes
Overload-proof Yes
Synchronous serial interface
Signal transmission RS485
Data transfer rate Depends on the configured encoder type
Differential voltage
Minimum 2.0 V
Maximum 6.0 V
Support
Motion system
mapp Motion 5.1.0 and higher
ACP10/ARNC0 5.01.0 and higher
Ambient conditions
Temperature
Operation
Nominal -25 to 55°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
Номер модель:
8EAC0150.001-1
Описание:
ACOPOS P3 plug-in module, digital multi-encoder interface
Дополнительные аксессуары
Adapter cables
8ECF00X4.1241C-0 ACOPOS P3 adapter cable for digital encoder interface, length 0.4 m, 1x 4x 0.14 mm² + 4x 0.35 mm², 9-pin female DSUB, 8-pin male Mini I/O connector
Документация Версия (Дата) Загрузка
Datasheet 8EAC0150.001-1 PDF / 434 KB
Обновление Automation Studio HW Версия (Дата) Загрузка
V4.1 HW Upgrade (8EAC0150.001-1) EXE / 2 MB
Сертификаты Версия (Дата) Загрузка
ACOPOS P3 KC certificates ZIP / 2 MB
EU Declaration Servos ACOPOS P3 PDF / 205 KB
UK Declaration Servos ACOPOS P3 PDF / 126 KB

Укажите страну и язык

B&R Logo