0PS1200.3

Status display	Green LED (DC OK), threshold value U_out > 21 V
Insulation voltages
Input - Output	3 kV DC (type test) 3.1 kV DC (routine test)
Input - Ground	1.5 kV DC (type test) 3.1 kV DC (routine test)
Input - Signal	3 kV DC (type test) 3.1 kV DC (routine test)
Active DC OK switch output	See section "Dry switching contact".
Connection type	Push-in connection
Certifications
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	Not applicable
UL	cULus E534663 Industrial control equipment
DNV	Temperature: D (-25 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: A

Nominal input voltage	100 to 240 VAC
Input voltage	100 to 240 VAC -15% to +10% 100 to 240 VDC ±10% 115 to 240 VAC ±10% (UL) 160 to 240 VDC ±10% (UL)
Network type	Star network (TN, TT, IT(PE))
Frequency	50 to 60 Hz ±10%
Inrush current	<21 A
Current consumption	5.3 A / 2.15 A (100 VAC / 240 VAC) 4.4 A / 2.3 A (120 VAC / 230 VAC) 5.2 A / 2.1 A (100 VDC / 240 VDC)
I²t	<1.091 A²s
Power failure bypass	Typ. 23 ms (120 VAC) Typ. 24 ms (230 VAC)
Leakage current to PE	<3.5 mA
Protective circuit	Varistor transient protection
Internal fuse	10 A
Required line fuse for device and line protection	See section "Input protection".

Nominal voltage	24 VDC
Output power	480 W / Max. 720 W (5 s)
Output voltage	24 to 28 VDC
Output current	20 A / Max. 30 A (5 s)
Setting range for output voltage	24 to 28 VDC
Control deviation	<0.1% (input voltage change ±10%) <3% (load change, dynamic) <1% (load change, static)
Rise time	≤1 s (U_OUT (10 to 90%))
Residual ripple	Typ. 50 mV_SS
Can be connected in parallel	Yes, for increased efficiency and redundancy
Can be connected in series	Yes, for increased output voltage (observe SELV limit)
Overvoltage protection	≤35 VDC (on the output (OVP))
Protective functions	Short-circuit protection
Feedback voltage resistance	≤35 VDC

Mounting orientation
Horizontal	Yes
Vertical	No
Installation elevation above sea level
Maximum	5000 m
Flammability class	V0
Ventilation/Cooling	Normal convection, no fan required
Degree of protection per EN 60529	IP20
Protection class	I

Temperature
Operation	-25 to 70°C
Derating	See section "Derating".
Starting temperature	-40°C
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	Max. 95%, non-condensing
Vibration
Operation	10 to 50 Hz, amplitude ±0.2 mm 50 to 150 Hz, 2.3 g, 90 min, per IEC 60068-2-6
Shock
Operation	18 ms, 30 g, in each direction, per IEC 60068-2-27
Pollution degree	2
Climate category	3K3, per EN 60721
Overvoltage category	III (≤2000 m) / II (≤5000 m), per EN 61010-1 III (≤2000 m) / II (≤5000 m), per EN 61010-2-201

Housing
Material	Aluminum sheet, plastic cover PA
Coating	No protective coating
Installation	Easy top-hat rail installation (NS 35 rails, EN 60715)
Dimensions
Width	55 mm
Height	135 mm
Depth	132 mm
Weight	940 g

0PS1200.3

Minimum space requirement in the control cabinet due to a thin design
Robust and reliable thanks to dynamic boost with a strong output characteristic curve for starting heavy loads
Optical and preventive function monitoring with three-color LED and dry switching contact
Easy handling due to push-in connections, label fields, wire stripping mark and tamper-resistant setup
Can be connected in parallel for increased power and redundancy
Temperature range: -25°C to +70°C
Worldwide use thanks to AC and DC wide-range input
International certification package

24 VDC power supply unit, 1-phase, 20 A, input 100 to 240 VAC, wide range, thin design, top-hat rail installation

Certyfikaty	Version (Date)	Download
DNV Type Approval Certificate - Power Supplies		PDF / 174 KB Zaloguj się aby pobrać
EU Declaration Power supplies		PDF / 309 KB Zaloguj się aby pobrać

Dokumentacja	Version (Date)	Download
Data sheet 0PS1200.3		PDF / 3 MB Zaloguj się aby pobrać

E-CAD (szablony Electro lub EPLAN)	Version (Date)	Download
PowerSupply EPLAN P8 from V2.4		EXE / 13 MB Zaloguj się aby pobrać

M-CAD (Mechan. szablony)	Version (Date)	Download
3D file DXF/STEP 0PS1200.3		ZIP / 1 MB Zaloguj się aby pobrać